Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

ZMNHJD1 : configuration erronée

Uniquement pour apporter des contributions aux configurations OpenZwave (corrections de configurations erronées ou compléments de configurations manquantes). Si vous avez un souci avec votre module, merci de poster dans Périphériques Z-Wave !
Règles du forum
Répondre
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

ZMNHJD1 : configuration erronée

Message par galiceau » 16 déc. 2016, 19:01

Bonjour,

J'ai installé ce module pour piloter mon chauffe serviette. La première que je l'ai inclus tout était correcte. Sauf que je n'avais pas la sonde de température que j'ai reçu quelques semaines apres. J'ai donc du refaire une inclusion (en ayant bien fait une exclusion au préalable) pour que la sonde de T° soit pris en compte. Sauf qu'à partir de ce moment là je n'ai jamais eu la config correcte. J'ai beau refaire et refaire exclusion/inclusion (avec ou sans la sonde), toujours le même résultat.

voici les screenshosts :
ZMNHJD1.equipement.vue.png
ZMNHJD1.equipement.vue.png (735.28 Kio) Consulté 2652 fois
ZMNHJD1.commande.vue.png
ZMNHJD1.commande.vue.png (512 Kio) Consulté 2652 fois
ZMNHJD1.resume.vue.png
ZMNHJD1.resume.vue.png (62.9 Kio) Consulté 2652 fois
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 16 déc. 2016, 19:03

ZMNHJD1.association.vue.png
ZMNHJD1.association.vue.png (65.03 Kio) Consulté 2649 fois
ZMNHJD1.valeurs.vue.png
ZMNHJD1.valeurs.vue.png (59.16 Kio) Consulté 2649 fois
ZMNHJD1.parametres.vue.png
ZMNHJD1.parametres.vue.png (64.28 Kio) Consulté 2649 fois
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 16 déc. 2016, 21:18

Supprimes simplement l'équipement sans l'exclure puis fais la synchro pour voir si c'est bon


Sent from my iPad using Tapatalk
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 12:12

nechry a écrit :Supprimes simplement l'équipement sans l'exclure puis fais la synchro pour voir si c'est bon


Sent from my iPad using Tapatalk
pareil.
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 17 déc. 2016, 12:17

Je viens de regarder et les fichiers image et mapping sont bien present pour tes ids de module
https://github.com/jeedom/plugin-openzw ... pilote.jpg
https://github.com/jeedom/plugin-openzw ... ilote.json

Assures tou que tu fais bien la muse a jour des config de module, qu'il n'ya pas d'erreur a cette opération et supprime a nouveau et synchro.
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 12:54

Mise à jour de la configuration des modules faite avant de poster mon message. J'ai resynchronisé, utiliser le loupe pour régénérer les commandes, fait une exclusion / inclusion, etc. Rien y fait.

Envoyé de mon SGP511 en utilisant Tapatalk
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 17 déc. 2016, 14:06

Si tes ids sont ceux que tu as montrer et que les deux fichiers que je viens de référencer sont present dans ton installation il n'y a pas de raison que ça fonctionne pas.
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
stef
Actif
Messages : 861
Inscription : 28 oct. 2014, 16:34
Localisation : Lyon - Est

Re: ZMNHJD1 : configuration erronée

Message par stef » 17 déc. 2016, 14:17

j'ai les même modules ils fonctionnent très bien
je vois 2 possibilités : module défaillant, ou tu fais l'inclusion trop loin de ta clé
MERCI A TOUTE L'EQUIPE POUR LE TAF
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 15:33

nechry a écrit :Si tes ids sont ceux que tu as montrer et que les deux fichiers que je viens de référencer sont present dans ton installation il n'y a pas de raison que ça fonctionne pas.
J'ai pas vérifié les fichiers. Je regarde.

Envoyé de mon Nexus 5X en utilisant Tapatalk
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 15:33

stef a écrit :j'ai les même modules ils fonctionnent très bien
je vois 2 possibilités : module défaillant, ou tu fais l'inclusion trop loin de ta clé
Module fonctionne correctement avant que je rajoute la sonde de température. Et je fais l'inclusion à côté de ma jeedom.

Envoyé de mon Nexus 5X en utilisant Tapatalk
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 15:44

C'est bien dans /usr/share/nginx/www/jeedom/plugins/openzwave qu'il faut que je regarde ?
SI oui je n'ai pas devices dans core/config.
Normal ?
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 15:48

par contre j'ai trouvé dans ce répertoire /usr/share/nginx/www/jeedom/plugins/openzwave/ressources/openzwave/config/qubino :
ZMNHAA2.xml ZMNHBDx.xml ZMNHDA2.xml ZMNHIDx.xml ZMNHLAx.xml ZMNHSDx.xml ZMNHVDx.xml
ZMNHADx.xml ZMNHCA2.xml ZMNHDDx.xml ZMNHJA2.xml ZMNHNDx.xml ZMNHTDx.xml ZMNHZDx.xml
ZMNHBA2.xml ZMNHCDx.xml ZMNHIA2.xml ZMNHJD1.xml ZMNHODx.xml ZMNHUD1.xml
et pour ZMNHJD1.xml :

Code : Tout sélectionner

<?xml version="1.0" encoding="utf-8"?>
<Product xmlns='http://code.google.com/p/open-zwave/'>

<!-- Qubino: ZMNHJD1 Flush Dimmer Fils Pilotes -->

        <!-- Configuration -->
        <CommandClass id="112">
                <Value type="list" genre="config" instance="1" index="1" label="Input 1 switch type" size="1" min="0" max="1" value="1">
                        <Help/>
                        <Item label="Mono-stable switch type (push button)" value="0"/>
                        <Item label="Bi-stable switch type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="2" label="Input 2 switch type" size="1" min="0" max="1" value="1">
                        <Help/>
                        <Item label="Mono-stable switch type (push button)" value="0"/>
                        <Item label="Bi-stable switch type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="3" label="Input 3 switch type" size="1" min="0" max="1" value="1">
                        <Help/>
                        <Item label="Mono-stable switch type (push button)" value="0"/>
                        <Item label="Bi-stable switch type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="4" label="Input 1 contact type" size="1" min="0" max="1" value="0">
                        <Help/>
                        <Item label="NO (normally open) input type" value="0"/>
                        <Item label="NC (normally close) input type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="5" label="Input 2 contact type" size="1" min="0" max="1" value="0">
                        <Help/>
                        <Item label="NO (normally open) input type" value="0"/>
                        <Item label="NC (normally close) input type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="6" label="Input 3 contact type" size="1" min="0" max="1" value="0">
                        <Help/>
                        <Item label="NO (normally open) input type" value="0"/>
                        <Item label="NC (normally close) input type" value="1"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="11" label="Input 1 Functionality selection" size="1" min="0" max="6" value="1">
                        <Help/>
                        <Item label="Nothing" value="0"/>
                        <Item label="Confort" value="1"/>
                        <Item label="Confort -1" value="2"/>
                        <Item label="Confort -2" value="3"/>
                        <Item label="Eco" value="4"/>
                        <Item label="Hors-Gel" value="5"/>
                        <Item label="STOP" value="6"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="12" label="Input 2 Functionality selection" size="1" min="0" max="6" value="4">
                        <Help/>
                        <Item label="Nothing" value="0"/>
                        <Item label="Confort" value="1"/>
                        <Item label="Confort -1" value="2"/>
                        <Item label="Confort -2" value="3"/>
                        <Item label="Eco" value="4"/>
                        <Item label="Hors-Gel" value="5"/>
                        <Item label="STOP" value="6"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="13" label="Input 3 Functionality selection" size="1" min="0" max="6" value="5">
                        <Help/>
                        <Item label="Nothing" value="0"/>
                        <Item label="Confort" value="1"/>
                        <Item label="Confort -1" value="2"/>
                        <Item label="Confort -2" value="3"/>
                        <Item label="Eco" value="4"/>
                        <Item label="Hors-Gel" value="5"/>
                        <Item label="STOP" value="6"/>
                </Value>

                <Value type="list" genre="config" instance="1" index="30" label="Saving the state of the relay after a power failure" size="1" min="0" max="1" value="0">
                        <Help/>
                        <Item label="Flush dimmer module saves its state before power failure (it returns to the last position saved before a power failure)" value="0" />
                        <Item label="Flush dimmer module does not save the state after a power failure, it returns to off position" value="1" />
                </Value>

        </CommandClass>

        <!-- Association Groups -->
        <CommandClass id="133">
                <Associations num_groups="5">
                        <Group index="1" max_associations="5" label="Multilevel" auto="false"/>
                        <Group index="2" max_associations="5" label="Input I1 state" />
                        <Group index="3" max_associations="5" label="Input I2 state" />
                        <Group index="4" max_associations="5" label="Input I3 state" />
                        <Group index="5" max_associations="1" label="Lifeline" auto="true"/>
                </Associations>
        </CommandClass>

        <!-- Remove COMMAND_CLASS_BASIC -->
        <CommandClass id="32" action="remove" />

        <!-- Map endpoints to instances -->
        <CommandClass id="96" mapping="endpoints" />

</Product>
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 17 déc. 2016, 15:52

Il te faut absolument le dossier core/devices c'est donc ton problème. L'autre dossier est aussi requis mais pour l'image ni le mapping de cmds.

Regarde bien dans le logs de la mise a jour des config de modules pour vour ce qui c'est passé
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 17 déc. 2016, 15:55

la log d'update :

Code : Tout sélectionner

jeedom@jeedom /usr/share/nginx/www/jeedom/log $ cat openzwave_update
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-armv7l
creating build/bdist.linux-armv7l/egg
copying build/lib.linux-armv7l-2.7/libopenzwave.so -> build/bdist.linux-armv7l/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-armv7l/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-armv7l/egg
running install_data
creating build/bdist.linux-armv7l/egg/config
copying openzwave/config/options.xml -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/manufacturer_specific.xml -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/device_classes.xml -> build/bdist.linux-armv7l/egg/config
creating build/bdist.linux-armv7l/egg/config/greenwave
copying openzwave/config/greenwave/powernode6.xml -> build/bdist.linux-armv7l/egg/config/greenwave
copying openzwave/config/greenwave/powernode1.xml -> build/bdist.linux-armv7l/egg/config/greenwave
creating build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/ses303.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/srt323.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/hrt4zw.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/sir321.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/scsc17.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/asrzw.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/ses302.xml -> build/bdist.linux-armv7l/egg/config/horstmann
creating build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/009303.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123658.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/solar-siren.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/smoke-detector.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/009105.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123580.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123601.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/zweather.xml -> build/bdist.linux-armv7l/egg/config/popp
creating build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa3.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa2.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/mimolite.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
creating build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct50e.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct30.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct100.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct101.xml -> build/bdist.linux-armv7l/egg/config/2gig
creating build/bdist.linux-armv7l/egg/config/sensative
copying openzwave/config/sensative/strips.xml -> build/bdist.linux-armv7l/egg/config/sensative
creating build/bdist.linux-armv7l/egg/config/iris
copying openzwave/config/iris/rangeextender.xml -> build/bdist.linux-armv7l/egg/config/iris
creating build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/z.xml -> build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/rsroom.xml -> build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/living.xml -> build/bdist.linux-armv7l/egg/config/danfoss
creating build/bdist.linux-armv7l/egg/config/assa_abloy
copying openzwave/config/assa_abloy/KeyfreeConnected.xml -> build/bdist.linux-armv7l/egg/config/assa_abloy
copying openzwave/config/assa_abloy/RealLivingCapTouch.xml -> build/bdist.linux-armv7l/egg/config/assa_abloy
creating build/bdist.linux-armv7l/egg/config/intermatic
copying openzwave/config/intermatic/ca8900.xml -> build/bdist.linux-armv7l/egg/config/intermatic
creating build/bdist.linux-armv7l/egg/config/fakro
copying openzwave/config/fakro/zws230.xml -> build/bdist.linux-armv7l/egg/config/fakro
copying openzwave/config/fakro/zws12.xml -> build/bdist.linux-armv7l/egg/config/fakro
creating build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs412.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs513.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs411.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs312.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs311.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs314.xml -> build/bdist.linux-armv7l/egg/config/mcohome
creating build/bdist.linux-armv7l/egg/config/nexia
copying openzwave/config/nexia/db100z.xml -> build/bdist.linux-armv7l/egg/config/nexia
creating build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw15s.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-sc7.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw20rm.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw20r.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw500d.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-bpc.xml -> build/bdist.linux-armv7l/egg/config/enerwave
creating build/bdist.linux-armv7l/egg/config/dragontech
copying openzwave/config/dragontech/wd-100.xml -> build/bdist.linux-armv7l/egg/config/dragontech
creating build/bdist.linux-armv7l/egg/config/qees
copying openzwave/config/qees/reto-dimmer-plus.xml -> build/bdist.linux-armv7l/egg/config/qees
copying openzwave/config/qees/reto-plugin-switch.xml -> build/bdist.linux-armv7l/egg/config/qees
creating build/bdist.linux-armv7l/egg/config/zipato
copying openzwave/config/zipato/RGBBulb.xml -> build/bdist.linux-armv7l/egg/config/zipato
copying openzwave/config/zipato/MiniKeypad.xml -> build/bdist.linux-armv7l/egg/config/zipato
creating build/bdist.linux-armv7l/egg/config/electronicsolutions
copying openzwave/config/electronicsolutions/dbmz.xml -> build/bdist.linux-armv7l/egg/config/electronicsolutions
creating build/bdist.linux-armv7l/egg/config/domitech
copying openzwave/config/domitech/zb22uk.xml -> build/bdist.linux-armv7l/egg/config/domitech
copying openzwave/config/domitech/ze27eu.xml -> build/bdist.linux-armv7l/egg/config/domitech
creating build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zd2201.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zp3111.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zd2102.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1601eu5.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zg8101.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1601eu.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zs5101eu.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zp3102.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1602eu5.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1602eu.xml -> build/bdist.linux-armv7l/egg/config/vision
creating build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z120.xml -> build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z110.xml -> build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z510.xml -> build/bdist.linux-armv7l/egg/config/dlink
creating build/bdist.linux-armv7l/egg/config/devolo
copying openzwave/config/devolo/mt02648.xml -> build/bdist.linux-armv7l/egg/config/devolo
creating build/bdist.linux-armv7l/egg/config/frostdale
copying openzwave/config/frostdale/fdn2nxx.xml -> build/bdist.linux-armv7l/egg/config/frostdale
creating build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/polylock.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/doorlock.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/keypad.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
creating build/bdist.linux-armv7l/egg/config/gr
copying openzwave/config/gr/gr105n.xml -> build/bdist.linux-armv7l/egg/config/gr
creating build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/phpsg01.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan08.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan04.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan03.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/phpat02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/psm02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02-1c.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pse02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/psr04.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02-b.xml -> build/bdist.linux-armv7l/egg/config/philio
creating build/bdist.linux-armv7l/egg/config/kwikset
copying openzwave/config/kwikset/smartcode.xml -> build/bdist.linux-armv7l/egg/config/kwikset
creating build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz67.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz66d.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/sm103.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz68.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz65d.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz88.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tsp01.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
creating build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/ZWESJ300.xml -> build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/05458.xml -> build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/ZWES1000.xml -> build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/zwfb.xml -> build/bdist.linux-armv7l/egg/config/duwi
creating build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs211.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fggc001.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs212.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgss101.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgfs101.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgr222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgfs101zw5.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgms.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgwpe.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs221.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgrgbwm441.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgbs001.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgrm222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgsd002.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgd211.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgd212.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgr221.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgk001.xml -> build/bdist.linux-armv7l/egg/config/fibaro
creating build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb29.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc35103.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc19103.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc24.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw075.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw121.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsa22.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw117.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb28.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc06106.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb04100.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw120.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc11.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw074.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc08101.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw097.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw096.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw112.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw089.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw062.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc18103.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsd37.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb05.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc26103.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw099.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc13104.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc14104.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw095.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw090.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc10.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw088.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw080.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsa03202.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsa38.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb54.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw078.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc27103.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb45.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw130.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw056.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsb09104.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw098.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsc12104.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw100.xml -> build/bdist.linux-armv7l/egg/config/aeotec
creating build/bdist.linux-armv7l/egg/config/linear
copying openzwave/config/linear/WD500Z-1.xml -> build/bdist.linux-armv7l/egg/config/linear
copying openzwave/config/linear/PD300Z-2.xml -> build/bdist.linux-armv7l/egg/config/linear
copying openzwave/config/linear/LB60Z-1.xml -> build/bdist.linux-armv7l/egg/config/linear
creating build/bdist.linux-armv7l/egg/config/schlage
copying openzwave/config/schlage/BE469NXCEN.xml -> build/bdist.linux-armv7l/egg/config/schlage
creating build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zurc.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zts-110.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zfm-80.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zrc-90.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zxt-120.xml -> build/bdist.linux-armv7l/egg/config/remotec
creating build/bdist.linux-armv7l/egg/config/everspringct
copying openzwave/config/everspringct/hsm02.xml -> build/bdist.linux-armv7l/egg/config/everspringct
creating build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06433.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_064435.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/iTemp.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/popp_kfob-c.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06436.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/kfob.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/zweather.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WCD2.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WALLC-S.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_KFOB-S.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_RC2.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_05431.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
creating build/bdist.linux-armv7l/egg/config/swiid
copying openzwave/config/swiid/swiidinter.xml -> build/bdist.linux-armv7l/egg/config/swiid
copying openzwave/config/swiid/swiidplug.xml -> build/bdist.linux-armv7l/egg/config/swiid
creating build/bdist.linux-armv7l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_cometz.xml -> build/bdist.linux-armv7l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_stellaz.xml -> build/bdist.linux-armv7l/egg/config/eurotronic
creating build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/PanicButton.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/PluginDimmer.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/AlarmSound.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/SceneController.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/TagReader.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/Molite.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/1poleswitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/EnergySwitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/DoorSensor.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/2poleswitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/HeatingControl.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/BuiltinDimmer.xml -> build/bdist.linux-armv7l/egg/config/BeNext
creating build/bdist.linux-armv7l/egg/config/cooper
copying openzwave/config/cooper/RF9505-T.xml -> build/bdist.linux-armv7l/egg/config/cooper
copying openzwave/config/cooper/RF9540-N.xml -> build/bdist.linux-armv7l/egg/config/cooper
creating build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vrcpg.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vrf01.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vri06.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/rzi10.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vri10.xml -> build/bdist.linux-armv7l/egg/config/leviton
creating build/bdist.linux-armv7l/egg/config/schlagelink
copying openzwave/config/schlagelink/minikeypad.xml -> build/bdist.linux-armv7l/egg/config/schlagelink
copying openzwave/config/schlagelink/itemp.xml -> build/bdist.linux-armv7l/egg/config/schlagelink
creating build/bdist.linux-armv7l/egg/config/trane
copying openzwave/config/trane/TZEMT400AB32MAA.xml -> build/bdist.linux-armv7l/egg/config/trane
copying openzwave/config/trane/TZEMT400BB32MAA.xml -> build/bdist.linux-armv7l/egg/config/trane
creating build/bdist.linux-armv7l/egg/config/widom
copying openzwave/config/widom/UBS104.xml -> build/bdist.linux-armv7l/egg/config/widom
copying openzwave/config/widom/UME304C_S.xml -> build/bdist.linux-armv7l/egg/config/widom
creating build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/lsm-15.xml -> build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/lrm-as.xml -> build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/ltm-5.xml -> build/bdist.linux-armv7l/egg/config/evolve
creating build/bdist.linux-armv7l/egg/config/merten
copying openzwave/config/merten/50x5xx.xml -> build/bdist.linux-armv7l/egg/config/merten
copying openzwave/config/merten/507801.xml -> build/bdist.linux-armv7l/egg/config/merten
creating build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHIA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHSDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHLAx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHZDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHTDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHDDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHUD1.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHAA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHCA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHADx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHCDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHIDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHDA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHODx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHNDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHVDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJD1.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
creating build/bdist.linux-armv7l/egg/config/honeywell
copying openzwave/config/honeywell/th8320zw1000.xml -> build/bdist.linux-armv7l/egg/config/honeywell
creating build/bdist.linux-armv7l/egg/config/thermofloor
copying openzwave/config/thermofloor/heatit021.xml -> build/bdist.linux-armv7l/egg/config/thermofloor
creating build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/ztroller.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/hsm200.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/hsm100.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/ezmotionplus.xml -> build/bdist.linux-armv7l/egg/config/homeseer
creating build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0007.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0005.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/em52-zw.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0009.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/pm12-zw.xml -> build/bdist.linux-armv7l/egg/config/rcs
creating build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/dimmer_module.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/12724-dimmer.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/relay.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/dimmer.xml -> build/bdist.linux-armv7l/egg/config/ge
creating build/bdist.linux-armv7l/egg/config/stelpro
copying openzwave/config/stelpro/stzw402.xml -> build/bdist.linux-armv7l/egg/config/stelpro
creating build/bdist.linux-armv7l/egg/config/vitrum
copying openzwave/config/vitrum/vitrumBS.xml -> build/bdist.linux-armv7l/egg/config/vitrum
creating build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/cws3101wallswitch.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/asp3100SmartPlug.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/crc360xSofremote.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/crc3100OctanRemote.xml -> build/bdist.linux-armv7l/egg/config/nodon
creating build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st815.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an180.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sm103.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an145.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an179.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/ad147.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/tse03.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st814.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sf812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sp814.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/hac01.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an158.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an181.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/hsp02.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/ad146.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/se812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sp103.xml -> build/bdist.linux-armv7l/egg/config/everspring
creating build/bdist.linux-armv7l/egg/config/northq
copying openzwave/config/northq/nq92021.xml -> build/bdist.linux-armv7l/egg/config/northq
copying openzwave/config/northq/nq9021.xml -> build/bdist.linux-armv7l/egg/config/northq
copying openzwave/config/northq/nq9121.xml -> build/bdist.linux-armv7l/egg/config/northq
creating build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zir010.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdw232.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zrw103.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdw103.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/lfm20.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zrp110.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdm230.xml -> build/bdist.linux-armv7l/egg/config/act
creating build/bdist.linux-armv7l/egg/config/waynedalton
copying openzwave/config/waynedalton/WDTC-20.xml -> build/bdist.linux-armv7l/egg/config/waynedalton
copying openzwave/config/zwscene.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/manufacturer_specific.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/options.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/zwcfg.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/device_configuration.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/device_classes.xsd -> build/bdist.linux-armv7l/egg/config
creating build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.0-py2.7-linux-armv7l.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing libopenzwave-0.3.0-py2.7-linux-armv7l.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Extracting libopenzwave-0.3.0-py2.7-linux-armv7l.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.0 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Processing dependencies for libopenzwave==0.3.0
Searching for six==1.10.0
Best match: six 1.10.0
six 1.10.0 is already the active version in easy-install.pth

Using /usr/local/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.0

Installation of lib finished.
python setup-api.py install
running install
Checking .pth file support in /usr/local/lib/python2.7/dist-packages/
/usr/bin/python -E -c pass
TEST PASSED: /usr/local/lib/python2.7/dist-packages/ appears to support .pth files
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_py
creating build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-armv7l-2.7/openzwave
creating build/bdist.linux-armv7l/egg
creating build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/command.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/network.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/scene.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/controller.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/option.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/object.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/__init__.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/singleton.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/group.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/node.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/value.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/libopenzwave.so -> build/bdist.linux-armv7l/egg
byte-compiling build/bdist.linux-armv7l/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/network.py to network.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/option.py to option.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/singleton.py to singleton.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/node.py to node.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/value.py to value.pyc
creating build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.0-py2.7.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing openzwave-0.3.0-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0-py2.7.egg
Extracting openzwave-0.3.0-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.0 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0-py2.7.egg
Processing dependencies for openzwave==0.3.0
Searching for libopenzwave==0.3.0
Best match: libopenzwave 0.3.0
Processing libopenzwave-0.3.0-py2.7-linux-armv7l.egg
libopenzwave 0.3.0 is already the active version in easy-install.pth

Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Searching for Louie==1.1
Best match: Louie 1.1
Adding Louie 1.1 to easy-install.pth file

Using /usr/lib/python2.7/dist-packages
Searching for six==1.10.0
Best match: six 1.10.0
six 1.10.0 is already the active version in easy-install.pth

Using /usr/local/lib/python2.7/dist-packages
Searching for nose==1.3.7
Best match: nose 1.3.7
nose 1.3.7 is already the active version in easy-install.pth
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin

Using /usr/local/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.0

Installation of API finished.
Failed to get D-Bus connection: No connection to service manager.
Everything is successfully installed!
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 17 déc. 2016, 18:41

C'est pas le log des configurations de modules ça
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 18 déc. 2016, 00:13

nechry a écrit :C'est pas le log des configurations de modules ça
oui c'est vrai. C'est la log concernant l'installation des dépendances. parce qu'en fait j'avais eu cet erreur lorsque j'ai lancé la configuration des modules:

Code : Tout sélectionner

[2016-12-18 00:08:10][INFO] : sudo /bin/bash /usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../resources/syncconf.sh >> /usr/share/nginx/www/jeedom/core/class/../../log/openzwave_syncconf 2>&1 &
[2016-12-17 23:08:10][INFO] : Lancement de la synchronisation des configurations
[2016-12-17 23:08:10][INFO] : Déplacement dans le répertoire de travail
[2016-12-17 23:08:10][INFO] : Nettoyage du répertoire de travail
[2016-12-17 23:08:10][INFO] : Récupération des sources (cette étape peut durer quelques minutes)
Cloning into 'plugin-openzwave'...
Cloning into 'open-zwave'...
[2016-12-17 23:11:28][ERROR] : Veuillez installer les dépendances
Dernière édition par galiceau le 18 déc. 2016, 00:31, édité 1 fois.
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 18 déc. 2016, 00:19

Code : Tout sélectionner

 /usr/share/nginx/www/jeedom/plugins/openzwave/resources $ sudo ./syncconf.sh
[2016-12-17 23:16:09][INFO] : Lancement de la synchronisation des configurations
[2016-12-17 23:16:09][INFO] : Déplacement dans le répertoire de travail
[2016-12-17 23:16:09][INFO] : Nettoyage du répertoire de travail
[2016-12-17 23:16:09][INFO] : Récupération des sources (cette étape peut durer quelques minutes)
Cloning into 'plugin-openzwave'...
remote: Counting objects: 1594, done.
remote: Compressing objects: 100% (1314/1314), done.
remote: Total 1594 (delta 494), reused 966 (delta 240), pack-reused 0
Receiving objects: 100% (1594/1594), 12.97 MiB | 92 KiB/s, done.
Resolving deltas: 100% (494/494), done.
Cloning into 'open-zwave'...
remote: Counting objects: 877, done.
remote: Compressing objects: 100% (802/802), done.
remote: Total 877 (delta 268), reused 329 (delta 42), pack-reused 0
Receiving objects: 100% (877/877), 1.20 MiB | 165 KiB/s, done.
Resolving deltas: 100% (268/268), done.
[2016-12-17 23:18:58][ERROR] : Veuillez installer les dépendances
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 18 déc. 2016, 00:50

Donc il y a bien un problème ici. C'est bin la dernière version du plugin, fin août 2016?


Sent from my iPad using Tapatalk
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
galiceau
Timide
Messages : 208
Inscription : 26 sept. 2015, 01:47
Contact :
Contacter galiceau

Re: ZMNHJD1 : configuration erronée

Message par galiceau » 18 déc. 2016, 01:14

nechry a écrit :Donc il y a bien un problème ici. C'est bin la dernière version du plugin, fin août 2016?


Sent from my iPad using Tapatalk
oui je pense :
Version.Openzwave.png
Version.Openzwave.png (81.62 Kio) Consulté 2546 fois
pour info je n'ai plus aucun icone pour tous mes modules openzwave.
Jeedom 3.2.10 DYI Zwave Pi2 + EnOcean
Haut
Avatar de l’utilisateur
nechry
Actif
Messages : 9644
Inscription : 24 juin 2014, 20:07
Localisation : Suisse
Contact :
Contacter nechry

Re: ZMNHJD1 : configuration erronée

Message par nechry » 18 déc. 2016, 10:06

Ok oui c'est la bonne version. Oui du coup comme tu as pas le dossier core/devices qui contient l'ensemble des images des modules, c'est normal de ne plus avoir aucunes sur tes module.

La je te dirais qu'a mon avis le plus simple serait de faire un backup de ton jeedom l'extraire en lieux sécuritaire, puis en suivant la documentation d'installation jeedom remonter une image netinstall. Et a la fin restorer ton backup. Oui et encore relance la mise a jour des config de module après tout ça. De cette façon tu repart du base tres propre.


Sent from my iPad using Tapatalk
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Haut
Répondre

Revenir vers « Configurations OpenZwave Manquantes »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 13 invités