[Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
as tu essayé de désactiver le plugin et le réactiver, ensuite relancer les dépendances pour voir si le demon passe en ok ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
merci pour l'aide
donc oui je viens de le faire et cela ne change rien..
j'ai testé sous windows, la carte recoit bien les info de la sonde ext.
j'ia essayer en branchant sur le PC en USB , cela ne change rien .. ce qui m'etonne et qu'il trouve l'ardino pour mettre le programme, mais n'arrive pas a voir qu'il y ait..
bref
si il faut je commande en arduino sans chip CH340... mais je vois que certain on ce modéle sans soucis..
2 captures, si cela peu aider..
donc oui je viens de le faire et cela ne change rien..
j'ai testé sous windows, la carte recoit bien les info de la sonde ext.
j'ia essayer en branchant sur le PC en USB , cela ne change rien .. ce qui m'etonne et qu'il trouve l'ardino pour mettre le programme, mais n'arrive pas a voir qu'il y ait..
bref
si il faut je commande en arduino sans chip CH340... mais je vois que certain on ce modéle sans soucis..
2 captures, si cela peu aider..
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Tu poses les questions et les réponses toi même, si ton rflink fonctionne, mais les dépendances en rouge ! C'est que ça vient pas du rflink mais des dépendances et tant que ça restera en rouge, pas la peine de connecter le rflink, ça marchera pas.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Envoyé de mon Nexus 7 en utilisant Tapatalk
RPI3 avec mSATA
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
vu que je ne sais pas comment cela fonctionne... je ne sais pas ce qu'il faut faire dans l'etat , je comprends bien ..
le RFlink fonctionne sur PC.
les dépendance. sont en rouge, je ne sais meme pas trop ce que c'est ... et pourquoi , ou comment les faire passer en vert...
je pensais que les dépendance passerai en rouge quand je brancherai le rflink,
j'ai pris RFlink en market, rien n'est indiqué pour les dépendance..
si quelqu'un peu m'aider ..
le RFlink fonctionne sur PC.
les dépendance. sont en rouge, je ne sais meme pas trop ce que c'est ... et pourquoi , ou comment les faire passer en vert...
je pensais que les dépendance passerai en rouge quand je brancherai le rflink,
j'ai pris RFlink en market, rien n'est indiqué pour les dépendance..
si quelqu'un peu m'aider ..
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Salut,
D'apres ton imprime ecran les dependance ne sont pas installé.
Dans l'onglet des dependences, clique sur relancer.
Une fois installer tu peux re commencer la manip.
Tiens nous au jus.
Matthew
D'apres ton imprime ecran les dependance ne sont pas installé.
Dans l'onglet des dependences, clique sur relancer.
Une fois installer tu peux re commencer la manip.
Tiens nous au jus.
Matthew
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
je fais que ca, et ca ne fonctionne pas .. on dirais qu'il ne veux pas les installer...
si certain peuvent m'aider, meme si besoins je peux donner accés a jeedom
si certain peuvent m'aider, meme si besoins je peux donner accés a jeedom
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Tubas installé les dépendances ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
tu es sur quoi ? j'ai vu PI ? mais le 1? 2 ?
si tu fais une recherche "npm introuvable"
tu trouves pas mal de chose et pas que sur rflink ça pourra peut être t'aider.
ta page santé ? tout est vert ? réseau droit sudo...etc
les dépendances, ba se sont des "programmes/mise à jours nécessaire au fonctionnement du plugin et pas toujours installé à la base"
bon, c'est mon explication certainement pas très.....linuxienne !
si tu fais une recherche "npm introuvable"
tu trouves pas mal de chose et pas que sur rflink ça pourra peut être t'aider.
ta page santé ? tout est vert ? réseau droit sudo...etc
les dépendances, ba se sont des "programmes/mise à jours nécessaire au fonctionnement du plugin et pas toujours installé à la base"
bon, c'est mon explication certainement pas très.....linuxienne !
RPI3 avec mSATA
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
rpi3 avec wifi
je regarde un peu partout , la page et verte sauf . rflink
je ne comprends pas pourquoi il ne veut pas installer le programme.
je regarde un peu partout , la page et verte sauf . rflink
je ne comprends pas pourquoi il ne veut pas installer le programme.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonjour,
Mon RFLink a du mal à récupérer les infos de mes sondes Oregon (THGN800, UVN800, PCR800 et WGR800), mais j'ai remarqué quand voulant le déplacer, pour améliorer la réception, les trames arrivées sans problème.
Dés que je tiens l'antenne, la réception est quasiment parfaite. Il y a t-il une solution pour améliorer la réception du RFLink (nodo).
Ma base WMR86, elle reçoit bien les infos et elle est placée juste à coté du RFLink.
Par avance merci.
Mon RFLink a du mal à récupérer les infos de mes sondes Oregon (THGN800, UVN800, PCR800 et WGR800), mais j'ai remarqué quand voulant le déplacer, pour améliorer la réception, les trames arrivées sans problème.
Dés que je tiens l'antenne, la réception est quasiment parfaite. Il y a t-il une solution pour améliorer la réception du RFLink (nodo).
Ma base WMR86, elle reçoit bien les infos et elle est placée juste à coté du RFLink.
Par avance merci.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
ne bouge plus .....si ça marche !Dés que je tiens l'antenne, la réception est quasiment parfaite
ou change d'antenne ! tu as qu'elle antenne ? il existe sur ebay des antennes 433 SMA 6DBI qui fonctionne mieux que celle de base.
RPI3 avec mSATA
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
dois je re installer mon RPI et jeedom ? vous en pensez quoi ? car je ne vois pas comment installer les dépendance, si cela ne s'install pas..
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
désolé pour ma part aucune idée :/
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Merci rol-rider,
j'ai bien pensé à rester sur place en tenant l'antenne mais ...
L'antenne est celle du site nodo-shop.nl.
https://www.nodo-shop.nl/nl/antennes/12 ... -nodo.html
Je vais essayer de commander une autre antenne, et on verra ...
A+.
j'ai bien pensé à rester sur place en tenant l'antenne mais ...
L'antenne est celle du site nodo-shop.nl.
https://www.nodo-shop.nl/nl/antennes/12 ... -nodo.html
Je vais essayer de commander une autre antenne, et on verra ...
A+.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
@esso1,
Réinstaller peut être pas, mais mettre à jour la distribution, certainement, c'est la première réponse que j'ai trouvé en ..... cherchant. Et après tu relances les dépendances.
Envoyé de mon Nexus 7 en utilisant Tapatalk
@GéraldB,
J'avais fait un test de 3 antennes sur ce post, mais.....il doit être loin !
Réinstaller peut être pas, mais mettre à jour la distribution, certainement, c'est la première réponse que j'ai trouvé en ..... cherchant. Et après tu relances les dépendances.
Envoyé de mon Nexus 7 en utilisant Tapatalk
@GéraldB,
J'avais fait un test de 3 antennes sur ce post, mais.....il doit être loin !
RPI3 avec mSATA
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
RFXcom; RFLink; Z-Wave; Mysensors; ESPEasy
Noeuds MySensors-téléinfo-Température-Distance-Baromètre-relais
Noeuds ESPEasy-open-garage-relais-PIR-Station Météo
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
@je vais le rechercher, merci
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Connecte toi en ssh à ton RPI ou directement si tu as un clavier souris écran brancher dessus.esso1 a écrit :dois je re installer mon RPI et jeedom ? vous en pensez quoi ? car je ne vois pas comment installer les dépendance, si cela ne s'install pas..
Ensuite tu lance
sudo apt-get update
Sudo apt-get upgrade
S’il te propose d’installer les mises à jour . Dit oui .
Après réessaye de réinstaller les dépendances
Envoyé de mon iPhone en utilisant Tapatalk
Cordialement.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Quand tu "installes" les dependences, les logs en dissent quoi ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
re, j'ai trouvé la solution, enfin moi j'ai rien trouvé réellement, on ma indiqué la solution.
merci pour l'aide
viewtopic.php?f=184&t=30984&p=538792#p538796
merci pour l'aide
viewtopic.php?f=184&t=30984&p=538792#p538796
-
- Timide
- Messages : 136
- Inscription : 19 août 2015, 17:18
- Localisation : sarthe
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Hello,
j'ai cruellement besoin d'un oeil / d'un avis d'expert sur mon problème car mon RFlink n'arrive pas à fonctionner de manière stable
Symptome :
J'arrive a faire des inclusions, et recevoir des trames, pendant quelques secondes seulement après le redémarrage du RFLINK ou de jeedom.
Après plus rien
Config :
Jeedom installé sur une debian
hardware : Nuc intel + ESXI et 1 VM pour jeedom
le RFLINK connecté sur un port USB du NUC (il fonctionnait avant sans pb sur mon RASP)
Infos / Logs :
La page santé est OK
Les dépendances sont au vert
J'ai fait la mise à jours du firmware R48 via Jeedom -> J'en déduit que j'ai bien une connexion entre ma VM Jeedom et mon RFLink
il y a des warning que je ne sais interpréter dans les logs de l'installation des dépendances que j'ai fait plusieurs fois. Voici 2 exemples
voici un exemple de communication que j'obtiens pendant quelques secondes :
et au bout de quelques secondes ... plus rien
plus aucune détection, plus aucune inclusion, plus rien
auriez vous une idée ? une début d'idée ? une mini piste ? qui pourrait m'aider à débloquer la situation svp ?
j'ai cruellement besoin d'un oeil / d'un avis d'expert sur mon problème car mon RFlink n'arrive pas à fonctionner de manière stable
Symptome :
J'arrive a faire des inclusions, et recevoir des trames, pendant quelques secondes seulement après le redémarrage du RFLINK ou de jeedom.
Après plus rien
Config :
Jeedom installé sur une debian
hardware : Nuc intel + ESXI et 1 VM pour jeedom
le RFLINK connecté sur un port USB du NUC (il fonctionnait avant sans pb sur mon RASP)
Infos / Logs :
La page santé est OK
Les dépendances sont au vert
J'ai fait la mise à jours du firmware R48 via Jeedom -> J'en déduit que j'ai bien une connexion entre ma VM Jeedom et mon RFLink
il y a des warning que je ne sais interpréter dans les logs de l'installation des dépendances que j'ai fait plusieurs fois. Voici 2 exemples
ou ca :DEPRECATION WARNING
Node.js v5.x is no longer actively supported!
voici les logs complets de l'installation des dépendances :npm WARN enoent ENOENT: no such file or directory, open '/var/www/html/plugins/rflink/node/package.json'
npm WARN node No description
npm WARN node No repository field.
npm WARN node No README data
npm WARN node No license field.
Code : Tout sélectionner
Get:3 http://security.debian.org/debian-security stretch/updates InRelease [62.9 kB]
Hit:4 http://ftp.fr.debian.org/debian stretch Release
Fetched 154 kB in 0s (238 kB/s)
Reading package lists...
## You seem to be using Debian version stretch.
## This maps to Debian "jessie"... Adjusting for you...
## Confirming "jessie" is supported...
+ curl -sLf -o /dev/null 'https://deb.nodesource.com/node_5.x/dists/jessie/Release'
## Adding the NodeSource signing key to your keyring...
+ curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add -
Warning: apt-key output should not be parsed (stdout is not a terminal)
OK
## Creating apt sources list file for the NodeSource Node.js v5.x repo...
+ echo 'deb https://deb.nodesource.com/node_5.x jessie main' > /etc/apt/sources.list.d/nodesource.list
+ echo 'deb-src https://deb.nodesource.com/node_5.x jessie main' >> /etc/apt/sources.list.d/nodesource.list
## Running `apt-get update` for you...
+ apt-get update
Ign:1 http://ftp.fr.debian.org/debian stretch InRelease
Hit:2 http://ftp.fr.debian.org/debian stretch-updates InRelease
Get:3 https://deb.nodesource.com/node_5.x jessie InRelease [3914 B]
Hit:4 http://ftp.fr.debian.org/debian stretch Release
Hit:5 http://security.debian.org/debian-security stretch/updates InRelease
Get:6 https://deb.nodesource.com/node_5.x jessie/main Sources [764 B]
Get:8 https://deb.nodesource.com/node_5.x jessie/main amd64 Packages [964 B]
Fetched 5642 B in 0s (10.0 kB/s)
Reading package lists...
================================================================================
================================================================================
DEPRECATION WARNING
Node.js v5.x is no longer actively supported!
You will not receive security or critical stability updates for this version.
You should migrate to a supported version of Node.js as soon as possible.
Use the installation script that corresponds to the version of Node.js you
wish to install. e.g.
* https://deb.nodesource.com/setup_4.x — Node.js v4 LTS "Argon" (recommended)
* https://deb.nodesource.com/setup_6.x — Node.js v6 Current
Please see https://github.com/nodejs/LTS/ for details about which version
may be appropriate for you.
The NodeSource Node.js Linux distributions GitHub repository contains
information about which versions of Node.js and which Linux distributions
are supported and how to use the install scripts.
https://github.com/nodesource/distributions
================================================================================
================================================================================
Continuing in 10 seconds ...
## Run `apt-get install nodejs` (as root) to install Node.js v5.x and npm
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
rlwrap
The following NEW packages will be installed:
nodejs rlwrap
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 9192 kB of archives.
After this operation, 43.4 MB of additional disk space will be used.
Get:1 http://ftp.fr.debian.org/debian stretch/main amd64 rlwrap amd64 0.42-3 [77.8 kB]
Get:2 https://deb.nodesource.com/node_5.x jessie/main amd64 nodejs amd64 5.12.0-1nodesource1~jessie1 [9114 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 9192 kB in 2s (3119 kB/s)
Selecting previously unselected package rlwrap.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 57665 files and directories currently installed.)
Preparing to unpack .../rlwrap_0.42-3_amd64.deb ...
Unpacking rlwrap (0.42-3) ...
Selecting previously unselected package nodejs.
Preparing to unpack .../nodejs_5.12.0-1nodesource1~jessie1_amd64.deb ...
Unpacking nodejs (5.12.0-1nodesource1~jessie1) ...
Setting up rlwrap (0.42-3) ...
update-alternatives: using /usr/bin/rlwrap to provide /usr/bin/readline-editor (readline-editor) in auto mode
Setting up nodejs (5.12.0-1nodesource1~jessie1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Version actuelle : v5.12.0
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
libftdi1
Suggested packages:
avrdude-doc
The following NEW packages will be installed:
avrdude libftdi1
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 322 kB of archives.
After this operation, 1125 kB of additional disk space will be used.
Get:1 http://ftp.fr.debian.org/debian stretch/main amd64 libftdi1 amd64 0.20-4 [19.0 kB]
Get:2 http://ftp.fr.debian.org/debian stretch/main amd64 avrdude amd64 6.3-2 [303 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 322 kB in 0s (491 kB/s)
Selecting previously unselected package libftdi1:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 61111 files and directories currently installed.)
Preparing to unpack .../libftdi1_0.20-4_amd64.deb ...
Unpacking libftdi1:amd64 (0.20-4) ...
Selecting previously unselected package avrdude.
Preparing to unpack .../avrdude_6.3-2_amd64.deb ...
Unpacking avrdude (6.3-2) ...
Setting up libftdi1:amd64 (0.20-4) ...
Processing triggers for libc-bin (2.24-11+deb9u1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up avrdude (6.3-2) ...
> serialport@4.0.7 install /var/www/html/plugins/rflink/node/node_modules/serialport
> node-pre-gyp install --fallback-to-build
[serialport] Success: "/var/www/html/plugins/rflink/node/node_modules/serialport/build/Release/serialport.node" is installed via remote
/var/www/html/plugins/rflink/node
`-- serialport@4.0.7
+-- bindings@1.2.1
+-- commander@2.11.0
+-- debug@2.6.9
| `-- ms@2.0.0
+-- lie@3.1.1
| `-- immediate@3.0.6
+-- nan@2.7.0
+-- node-pre-gyp@0.6.32
| +-- mkdirp@0.5.1
| | `-- minimist@0.0.8
| +-- nopt@3.0.6
| | `-- abbrev@1.0.9
| +-- npmlog@4.0.1
| | +-- are-we-there-yet@1.1.2
| | | +-- delegates@1.0.0
| | | `-- readable-stream@2.2.2
| | | +-- buffer-shims@1.0.0
| | | +-- core-util-is@1.0.2
| | | +-- inherits@2.0.3
| | | +-- isarray@1.0.0
| | | +-- process-nextick-args@1.0.7
| | | +-- string_decoder@0.10.31
| | | `-- util-deprecate@1.0.2
| | +-- console-control-strings@1.1.0
| | +-- gauge@2.7.2
| | | +-- aproba@1.0.4
| | | +-- has-unicode@2.0.1
| | | +-- object-assign@4.1.0
| | | +-- signal-exit@3.0.2
| | | +-- string-width@1.0.2
| | | | +-- code-point-at@1.1.0
| | | | `-- is-fullwidth-code-point@1.0.0
| | | | `-- number-is-nan@1.0.1
| | | +-- strip-ansi@3.0.1
| | | | `-- ansi-regex@2.0.0
| | | +-- supports-color@0.2.0
| | | `-- wide-align@1.1.0
| | `-- set-blocking@2.0.0
| +-- rc@1.1.6
| | +-- deep-extend@0.4.1
| | +-- ini@1.3.4
| | +-- minimist@1.2.0
| | `-- strip-json-comments@1.0.4
| +-- request@2.79.0
| | +-- aws-sign2@0.6.0
| | +-- aws4@1.5.0
| | +-- caseless@0.11.0
| | +-- combined-stream@1.0.5
| | | `-- delayed-stream@1.0.0
| | +-- extend@3.0.0
| | +-- forever-agent@0.6.1
| | +-- form-data@2.1.2
| | | `-- asynckit@0.4.0
| | +-- har-validator@2.0.6
| | | +-- chalk@1.1.3
| | | | +-- ansi-styles@2.2.1
| | | | +-- escape-string-regexp@1.0.5
| | | | +-- has-ansi@2.0.0
| | | | | `-- ansi-regex@2.0.0
| | | | +-- strip-ansi@3.0.1
| | | | | `-- ansi-regex@2.0.0
| | | | `-- supports-color@2.0.0
| | | +-- is-my-json-valid@2.15.0
| | | | +-- generate-function@2.0.0
| | | | +-- generate-object-property@1.2.0
| | | | | `-- is-property@1.0.2
| | | | +-- jsonpointer@4.0.0
| | | | `-- xtend@4.0.1
| | | `-- pinkie-promise@2.0.1
| | | `-- pinkie@2.0.4
| | +-- hawk@3.1.3
| | | +-- boom@2.10.1
| | | +-- cryptiles@2.0.5
| | | +-- hoek@2.16.3
| | | `-- sntp@1.0.9
| | +-- http-signature@1.1.1
| | | +-- assert-plus@0.2.0
| | | +-- jsprim@1.3.1
| | | | +-- extsprintf@1.0.2
| | | | +-- json-schema@0.2.3
| | | | `-- verror@1.3.6
| | | `-- sshpk@1.10.1
| | | +-- asn1@0.2.3
| | | +-- assert-plus@1.0.0
| | | +-- bcrypt-pbkdf@1.0.0
| | | +-- dashdash@1.14.1
| | | +-- ecc-jsbn@0.1.1
| | | +-- getpass@0.1.6
| | | +-- jodid25519@1.0.2
| | | +-- jsbn@0.1.0
| | | `-- tweetnacl@0.14.4
| | +-- is-typedarray@1.0.0
| | +-- isstream@0.1.2
| | +-- json-stringify-safe@5.0.1
| | +-- mime-types@2.1.13
| | | `-- mime-db@1.25.0
| | +-- oauth-sign@0.8.2
| | +-- qs@6.3.0
| | +-- stringstream@0.0.5
| | +-- tough-cookie@2.3.2
| | | `-- punycode@1.4.1
| | +-- tunnel-agent@0.4.3
| | `-- uuid@3.0.1
| +-- rimraf@2.5.4
| | `-- glob@7.1.1
| | +-- fs.realpath@1.0.0
| | +-- inflight@1.0.6
| | | `-- wrappy@1.0.2
| | +-- inherits@2.0.3
| | +-- minimatch@3.0.3
| | | `-- brace-expansion@1.1.6
| | | +-- balanced-match@0.4.2
| | | `-- concat-map@0.0.1
| | +-- once@1.4.0
| | | `-- wrappy@1.0.2
| | `-- path-is-absolute@1.0.1
| +-- semver@5.3.0
| +-- tar@2.2.1
| | +-- block-stream@0.0.9
| | +-- fstream@1.0.10
| | | `-- graceful-fs@4.1.11
| | `-- inherits@2.0.3
| `-- tar-pack@3.3.0
| +-- debug@2.2.0
| | `-- ms@0.7.1
| +-- fstream@1.0.10
| | +-- graceful-fs@4.1.11
| | `-- inherits@2.0.3
| +-- fstream-ignore@1.0.5
| | +-- inherits@2.0.3
| | `-- minimatch@3.0.3
| | `-- brace-expansion@1.1.6
| | +-- balanced-match@0.4.2
| | `-- concat-map@0.0.1
| +-- once@1.3.3
| | `-- wrappy@1.0.2
| +-- readable-stream@2.1.5
| | +-- buffer-shims@1.0.0
| | +-- core-util-is@1.0.2
| | +-- inherits@2.0.3
| | +-- isarray@1.0.0
| | +-- process-nextick-args@1.0.7
| | +-- string_decoder@0.10.31
| | `-- util-deprecate@1.0.2
| `-- uid-number@0.0.6
`-- object.assign@4.0.4
+-- define-properties@1.1.2
| `-- foreach@2.0.5
+-- function-bind@1.1.1
`-- object-keys@1.0.11
npm WARN enoent ENOENT: no such file or directory, open '/var/www/html/plugins/rflink/node/package.json'
npm WARN node No description
npm WARN node No repository field.
npm WARN node No README data
npm WARN node No license field.
> serialport@4.0.7 install /var/www/html/plugins/rflink/node/node_modules/serialport
> node-pre-gyp install --fallback-to-build
[serialport] Success: "/var/www/html/plugins/rflink/node/node_modules/serialport/build/Release/serialport.node" is installed via remote
/var/www/html/plugins/rflink/node
+-- request@2.83.0
| +-- aws-sign2@0.7.0
| +-- aws4@1.6.0
| +-- caseless@0.12.0
| +-- combined-stream@1.0.5
| | `-- delayed-stream@1.0.0
| +-- extend@3.0.1
| +-- forever-agent@0.6.1
| +-- form-data@2.3.1
| | `-- asynckit@0.4.0
| +-- har-validator@5.0.3
| | +-- ajv@5.2.3
| | | +-- co@4.6.0
| | | +-- fast-deep-equal@1.0.0
| | | +-- json-schema-traverse@0.3.1
| | | `-- json-stable-stringify@1.0.1
| | | `-- jsonify@0.0.0
| | `-- har-schema@2.0.0
| +-- hawk@6.0.2
| | +-- boom@4.3.1
| | +-- cryptiles@3.1.2
| | | `-- boom@5.2.0
| | +-- hoek@4.2.0
| | `-- sntp@2.0.2
| +-- http-signature@1.2.0
| | +-- assert-plus@1.0.0
| | +-- jsprim@1.4.1
| | | +-- extsprintf@1.3.0
| | | +-- json-schema@0.2.3
| | | `-- verror@1.10.0
| | | `-- core-util-is@1.0.2
| | `-- sshpk@1.13.1
| | +-- asn1@0.2.3
| | +-- bcrypt-pbkdf@1.0.1
| | +-- dashdash@1.14.1
| | +-- ecc-jsbn@0.1.1
| | +-- getpass@0.1.7
| | +-- jsbn@0.1.1
| | `-- tweetnacl@0.14.5
| +-- is-typedarray@1.0.0
| +-- isstream@0.1.2
| +-- json-stringify-safe@5.0.1
| +-- mime-types@2.1.17
| | `-- mime-db@1.30.0
| +-- oauth-sign@0.8.2
| +-- performance-now@2.1.0
| +-- qs@6.5.1
| +-- safe-buffer@5.1.1
| +-- stringstream@0.0.5
| +-- tough-cookie@2.3.3
| | `-- punycode@1.4.1
| +-- tunnel-agent@0.6.0
| `-- uuid@3.1.0
`-- serialport@4.0.7
npm WARN enoent ENOENT: no such file or directory, open '/var/www/html/plugins/rflink/node/package.json'
npm WARN node No description
npm WARN node No repository field.
npm WARN node No README data
npm WARN node No license field.
npm WARN In serialport@4.0.7 replacing bundled version of minimist with minimist@0.0.8
npm WARN In serialport@4.0.7 replacing bundled version of abbrev with abbrev@1.0.9
npm WARN In serialport@4.0.7 replacing bundled version of delegates with delegates@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of buffer-shims with buffer-shims@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of core-util-is with core-util-is@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of isarray with isarray@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of process-nextick-args with process-nextick-args@1.0.7
npm WARN In serialport@4.0.7 replacing bundled version of string_decoder with string_decoder@0.10.31
npm WARN In serialport@4.0.7 replacing bundled version of util-deprecate with util-deprecate@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of console-control-strings with console-control-strings@1.1.0
npm WARN In serialport@4.0.7 replacing bundled version of aproba with aproba@1.0.4
npm WARN In serialport@4.0.7 replacing bundled version of has-unicode with has-unicode@2.0.1
npm WARN In serialport@4.0.7 replacing bundled version of object-assign with object-assign@4.1.0
npm WARN In serialport@4.0.7 replacing bundled version of signal-exit with signal-exit@3.0.2
npm WARN In serialport@4.0.7 replacing bundled version of code-point-at with code-point-at@1.1.0
npm WARN In serialport@4.0.7 replacing bundled version of number-is-nan with number-is-nan@1.0.1
npm WARN In serialport@4.0.7 replacing bundled version of ansi-regex with ansi-regex@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of supports-color with supports-color@0.2.0
npm WARN In serialport@4.0.7 replacing bundled version of wide-align with wide-align@1.1.0
npm WARN In serialport@4.0.7 replacing bundled version of set-blocking with set-blocking@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of deep-extend with deep-extend@0.4.1
npm WARN In serialport@4.0.7 replacing bundled version of ini with ini@1.3.4
npm WARN In serialport@4.0.7 replacing bundled version of minimist with minimist@1.2.0
npm WARN In serialport@4.0.7 replacing bundled version of strip-json-comments with strip-json-comments@1.0.4
npm WARN In serialport@4.0.7 replacing bundled version of aws-sign2 with aws-sign2@0.6.0
npm WARN In serialport@4.0.7 replacing bundled version of aws4 with aws4@1.5.0
npm WARN In serialport@4.0.7 replacing bundled version of caseless with caseless@0.11.0
npm WARN In serialport@4.0.7 replacing bundled version of delayed-stream with delayed-stream@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of extend with extend@3.0.0
npm WARN In serialport@4.0.7 replacing bundled version of forever-agent with forever-agent@0.6.1
npm WARN In serialport@4.0.7 replacing bundled version of asynckit with asynckit@0.4.0
npm WARN In serialport@4.0.7 replacing bundled version of ansi-styles with ansi-styles@2.2.1
npm WARN In serialport@4.0.7 replacing bundled version of escape-string-regexp with escape-string-regexp@1.0.5
npm WARN In serialport@4.0.7 replacing bundled version of ansi-regex with ansi-regex@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of ansi-regex with ansi-regex@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of supports-color with supports-color@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of generate-function with generate-function@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of is-property with is-property@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of jsonpointer with jsonpointer@4.0.0
npm WARN In serialport@4.0.7 replacing bundled version of xtend with xtend@4.0.1
npm WARN In serialport@4.0.7 replacing bundled version of pinkie with pinkie@2.0.4
npm WARN In serialport@4.0.7 replacing bundled version of boom with boom@2.10.1
npm WARN In serialport@4.0.7 replacing bundled version of cryptiles with cryptiles@2.0.5
npm WARN In serialport@4.0.7 replacing bundled version of hoek with hoek@2.16.3
npm WARN In serialport@4.0.7 replacing bundled version of sntp with sntp@1.0.9
npm WARN In serialport@4.0.7 replacing bundled version of assert-plus with assert-plus@0.2.0
npm WARN In serialport@4.0.7 replacing bundled version of extsprintf with extsprintf@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of json-schema with json-schema@0.2.3
npm WARN In serialport@4.0.7 replacing bundled version of verror with verror@1.3.6
npm WARN In serialport@4.0.7 replacing bundled version of asn1 with asn1@0.2.3
npm WARN In serialport@4.0.7 replacing bundled version of assert-plus with assert-plus@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of bcrypt-pbkdf with bcrypt-pbkdf@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of dashdash with dashdash@1.14.1
npm WARN In serialport@4.0.7 replacing bundled version of ecc-jsbn with ecc-jsbn@0.1.1
npm WARN In serialport@4.0.7 replacing bundled version of getpass with getpass@0.1.6
npm WARN In serialport@4.0.7 replacing bundled version of jodid25519 with jodid25519@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of jsbn with jsbn@0.1.0
npm WARN In serialport@4.0.7 replacing bundled version of tweetnacl with tweetnacl@0.14.4
npm WARN In serialport@4.0.7 replacing bundled version of is-typedarray with is-typedarray@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of isstream with isstream@0.1.2
npm WARN In serialport@4.0.7 replacing bundled version of json-stringify-safe with json-stringify-safe@5.0.1
npm WARN In serialport@4.0.7 replacing bundled version of mime-db with mime-db@1.25.0
npm WARN In serialport@4.0.7 replacing bundled version of oauth-sign with oauth-sign@0.8.2
npm WARN In serialport@4.0.7 replacing bundled version of qs with qs@6.3.0
npm WARN In serialport@4.0.7 replacing bundled version of stringstream with stringstream@0.0.5
npm WARN In serialport@4.0.7 replacing bundled version of punycode with punycode@1.4.1
npm WARN In serialport@4.0.7 replacing bundled version of tunnel-agent with tunnel-agent@0.4.3
npm WARN In serialport@4.0.7 replacing bundled version of uuid with uuid@3.0.1
npm WARN In serialport@4.0.7 replacing bundled version of fs.realpath with fs.realpath@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of wrappy with wrappy@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of balanced-match with balanced-match@0.4.2
npm WARN In serialport@4.0.7 replacing bundled version of concat-map with concat-map@0.0.1
npm WARN In serialport@4.0.7 replacing bundled version of wrappy with wrappy@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of path-is-absolute with path-is-absolute@1.0.1
npm WARN In serialport@4.0.7 replacing bundled version of semver with semver@5.3.0
npm WARN In serialport@4.0.7 replacing bundled version of block-stream with block-stream@0.0.9
npm WARN In serialport@4.0.7 replacing bundled version of graceful-fs with graceful-fs@4.1.11
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of ms with ms@0.7.1
npm WARN In serialport@4.0.7 replacing bundled version of graceful-fs with graceful-fs@4.1.11
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of balanced-match with balanced-match@0.4.2
npm WARN In serialport@4.0.7 replacing bundled version of concat-map with concat-map@0.0.1
npm WARN In serialport@4.0.7 replacing bundled version of wrappy with wrappy@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of buffer-shims with buffer-shims@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of core-util-is with core-util-is@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of inherits with inherits@2.0.3
npm WARN In serialport@4.0.7 replacing bundled version of isarray with isarray@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of process-nextick-args with process-nextick-args@1.0.7
npm WARN In serialport@4.0.7 replacing bundled version of string_decoder with string_decoder@0.10.31
npm WARN In serialport@4.0.7 replacing bundled version of util-deprecate with util-deprecate@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of uid-number with uid-number@0.0.6
npm WARN In serialport@4.0.7 replacing bundled version of nopt with nopt@3.0.6
npm WARN In serialport@4.0.7 replacing bundled version of is-fullwidth-code-point with is-fullwidth-code-point@1.0.0
npm WARN In serialport@4.0.7 replacing bundled version of strip-ansi with strip-ansi@3.0.1
npm WARN In serialport@4.0.7 replacing bundled version of has-ansi with has-ansi@2.0.0
npm WARN In serialport@4.0.7 replacing bundled version of strip-ansi with strip-ansi@3.0.1
npm WARN In serialport@4.0.7 replacing bundled version of generate-object-property with generate-object-property@1.2.0
npm WARN In serialport@4.0.7 replacing bundled version of pinkie-promise with pinkie-promise@2.0.1
npm WARN In serialport@4.0.7 replacing bundled version of mime-types with mime-types@2.1.13
npm WARN In serialport@4.0.7 replacing bundled version of tough-cookie with tough-cookie@2.3.2
npm WARN In serialport@4.0.7 replacing bundled version of inflight with inflight@1.0.6
npm WARN In serialport@4.0.7 replacing bundled version of once with once@1.4.0
npm WARN In serialport@4.0.7 replacing bundled version of fstream with fstream@1.0.10
npm WARN In serialport@4.0.7 replacing bundled version of debug with debug@2.2.0
npm WARN In serialport@4.0.7 replacing bundled version of fstream with fstream@1.0.10
npm WARN In serialport@4.0.7 replacing bundled version of once with once@1.3.3
npm WARN In serialport@4.0.7 replacing bundled version of mkdirp with mkdirp@0.5.1
npm WARN In serialport@4.0.7 replacing bundled version of readable-stream with readable-stream@2.2.2
npm WARN In serialport@4.0.7 replacing bundled version of rc with rc@1.1.6
npm WARN In serialport@4.0.7 replacing bundled version of combined-stream with combined-stream@1.0.5
npm WARN In serialport@4.0.7 replacing bundled version of form-data with form-data@2.1.2
npm WARN In serialport@4.0.7 replacing bundled version of brace-expansion with brace-expansion@1.1.6
npm WARN In serialport@4.0.7 replacing bundled version of brace-expansion with brace-expansion@1.1.6
npm WARN In serialport@4.0.7 replacing bundled version of readable-stream with readable-stream@2.1.5
npm WARN In serialport@4.0.7 replacing bundled version of hawk with hawk@3.1.3
npm WARN In serialport@4.0.7 replacing bundled version of jsprim with jsprim@1.3.1
npm WARN In serialport@4.0.7 replacing bundled version of sshpk with sshpk@1.10.1
npm WARN In serialport@4.0.7 replacing bundled version of string-width with string-width@1.0.2
npm WARN In serialport@4.0.7 replacing bundled version of chalk with chalk@1.1.3
npm WARN In serialport@4.0.7 replacing bundled version of is-my-json-valid with is-my-json-valid@2.15.0
npm WARN In serialport@4.0.7 replacing bundled version of minimatch with minimatch@3.0.3
npm WARN In serialport@4.0.7 replacing bundled version of tar with tar@2.2.1
npm WARN In serialport@4.0.7 replacing bundled version of minimatch with minimatch@3.0.3
npm WARN In serialport@4.0.7 replacing bundled version of gauge with gauge@2.7.2
npm WARN In serialport@4.0.7 replacing bundled version of are-we-there-yet with are-we-there-yet@1.1.2
npm WARN In serialport@4.0.7 replacing bundled version of http-signature with http-signature@1.1.1
npm WARN In serialport@4.0.7 replacing bundled version of glob with glob@7.1.1
npm WARN In serialport@4.0.7 replacing bundled version of fstream-ignore with fstream-ignore@1.0.5
npm WARN In serialport@4.0.7 replacing bundled version of har-validator with har-validator@2.0.6
npm WARN In serialport@4.0.7 replacing bundled version of rimraf with rimraf@2.5.4
npm WARN In serialport@4.0.7 replacing bundled version of tar-pack with tar-pack@3.3.0
npm WARN In serialport@4.0.7 replacing bundled version of npmlog with npmlog@4.0.1
npm WARN In serialport@4.0.7 replacing bundled version of request with request@2.79.0
npm WARN In serialport@4.0.7 replacing bundled version of node-pre-gyp with node-pre-gyp@0.6.32
Code : Tout sélectionner
Fri Oct 20 2017 21:54:49 GMT+0200 (CEST) - Jeedom url : http://127.0.0.1:80/plugins/rflink/core/api/rflink.php?apikey=k2vpx8, gwAddress : /dev/ttyACM0
Fri Oct 20 2017 21:54:49 GMT+0200 (CEST) - server bound on 8020
Fri Oct 20 2017 21:54:50 GMT+0200 (CEST) - connected to serial gateway at /dev/ttyACM0
Fri Oct 20 2017 21:54:51 GMT+0200 (CEST) - Send Value : 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
Fri Oct 20 2017 21:54:53 GMT+0200 (CEST) - Server connected
Fri Oct 20 2017 21:54:53 GMT+0200 (CEST) - Send Value : 20;01;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF;
Fri Oct 20 2017 21:55:03 GMT+0200 (CEST) - Send Value : 20;02;Atlantic;ID=332760;SWITCH=01;CMD=ON;
Fri Oct 20 2017 21:55:09 GMT+0200 (CEST) - Send Value : antic;ID=332760;SWITCH=01;CMD=OFF;
Fri Oct 20 2017 21:55:22 GMT+0200 (CEST) - Send Value : 20;04;Atlantic;ID=64e0ef;SWITCH=01;CMD=ON;
Fri Oct 20 2017 21:55:26 GMT+0200 (CEST) - Send Value : 20;05;Chuango;ID=426359;SWITCH=02;CMD=ON;
Fri Oct 20 2017 21:55:31 GMT+0200 (CEST) - Send Value : 20;06;Chuango;ID=426359;SWITCH=02;CMD=ON;
plus aucune détection, plus aucune inclusion, plus rien
auriez vous une idée ? une début d'idée ? une mini piste ? qui pourrait m'aider à débloquer la situation svp ?
Nuc Intel - ESXI - VM Jeedom - IPX800 - Xiaomi - Zwave - RFLink
Qui est en ligne ?
Utilisateurs parcourant ce forum : Bing [Bot] et 6 invités