[Plugin Tiers][Sujet Principal] Plugin 1wire - OWFS
Re: [Plugin] 1wire - OWFS
Laisse tomber ie
Tu peux me dire si tu as une erreur dans la console (f12)
Tu peux me dire si tu as une erreur dans la console (f12)
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
je n arrive pas a reproduire le probleme
chez moi tout fonctionne bien
quelqu un a aussi cette erreur ?
c est une erreur jquery qui n arien a voir avec le module as tu le même problème sur d autre module ?
chez moi tout fonctionne bien
quelqu un a aussi cette erreur ?
c est une erreur jquery qui n arien a voir avec le module as tu le même problème sur d autre module ?
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Pour l'instant pas de soucis avec les autres modules, mais comme je débute mon projet je n'en ai pas 50...
Re: [Plugin] 1wire - OWFS
Réinstallation complète ce matin, en installant que ton plugin pour l'instant, et avec 1 seul objet, pas de soucis, tout fonctionne, je vois les 3 sondes !
Problème résolu (ou plutôt plus de problème à résoudre), je te tiens au courant si jamais j'arrive a reproduire le soucis que j'avais eut.
Merci pour tout.
Problème résolu (ou plutôt plus de problème à résoudre), je te tiens au courant si jamais j'arrive a reproduire le soucis que j'avais eut.
Merci pour tout.
Re: [Plugin] 1wire - OWFS
ok superWindes a écrit :Réinstallation complète ce matin, en installant que ton plugin pour l'instant, et avec 1 seul objet, pas de soucis, tout fonctionne, je vois les 3 sondes !
Problème résolu (ou plutôt plus de problème à résoudre), je te tiens au courant si jamais j'arrive a reproduire le soucis que j'avais eut.
Merci pour tout.
merci a toi pour ton retour
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Bonjour a tous je vient de recevoir mon DS9490 par contrôler mes 10 18B20
Installation plugin: ok
je possède un raspberry pi2
Et la le lien que me propose la configuration de plugin ne fonctionne pas:
wget -q -O - http://localhost/jeedom/plugins/onewire ... install.sh | sudo bash (rien ne se passe) en SSH.
seul celle pour une MINI officiel fonctionne, est-ce grave?, j'accède bien a OWFS sans aucune sonde de connecter mes lorsque je connecte 1 sonde voila se que sa m'affiche: la je ne sait plus part quel bout prendre le probleme!!!!!!!!
Installation plugin: ok
je possède un raspberry pi2
Et la le lien que me propose la configuration de plugin ne fonctionne pas:
wget -q -O - http://localhost/jeedom/plugins/onewire ... install.sh | sudo bash (rien ne se passe) en SSH.
seul celle pour une MINI officiel fonctionne, est-ce grave?, j'accède bien a OWFS sans aucune sonde de connecter mes lorsque je connecte 1 sonde voila se que sa m'affiche: la je ne sait plus part quel bout prendre le probleme!!!!!!!!
- Pièces jointes
-
- capture
- capture.png (127.65 Kio) Consulté 985 fois
Re: [Plugin] 1wire - OWFS
twiste 79 a écrit :Bonjour a tous je vient de recevoir mon DS9490 par contrôler mes 10 18B20
Installation plugin: ok
je possède un raspberry pi2
Et la le lien que me propose la configuration de plugin ne fonctionne pas:
wget -q -O - http://localhost/jeedom/plugins/onewire ... install.sh | sudo bash (rien ne se passe) en SSH.
seul celle pour une MINI officiel fonctionne, est-ce grave?, j'accède bien a OWFS sans aucune sonde de connecter mes lorsque je connecte 1 sonde voila se que sa m'affiche: la je ne sait plus part quel bout prendre le probleme!!!!!!!!
bonjour,
non aucun probleme .seul celle pour une MINI officiel fonctionne, est-ce grave?,
quand tu fais un owdir en ssh tu vois bien les fichiers
si tu connecte ta sonde :
quand tu fais un owdir tu ne vois plus rien ?
si c est le cas vérifie ton cable entre ta sonde et le dongle
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
De même relance l install est envoi moi le rapport stp
Envoyé de mon D6503 en utilisant Tapatalk
Envoyé de mon D6503 en utilisant Tapatalk
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Bonjour, merci pour ton retour rapide.
Voila ce que j'obtiens avec la sonde connectée.
(voir plus bas)
Et voici le script d'installation avec ma sonde d’essai connectée. Hier j'ai réessayé et dans la liste des composants, elle était présente mais plus maintenant.
jeedom@jeedom ~ $ wget -q -O - http://localhost/plugins/onewire/ressou ... install.sh | sudo bash
****************************************************************************
* Make sure that the i2c-bus module is not included in the blacklist file *
****************************************************************************
#blacklist i2c-bcm2708
******************************************************************
* Make sure that the i2c-dev module is included in /etc/modules *
******************************************************************
i2c-dev est deja dans le fichier /etc/modules
********************************************************
* Installation des dependances *
********************************************************
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://raspberrypi.collabora.com wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release
Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B]
Hit http://raspberrypi.collabora.com wheezy Release
Get:2 http://mirrordirector.raspbian.org wheezy Release [14.4 kB]
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages
Get:3 http://mirrordirector.raspbian.org wheezy/main armhf Packages [6,903 kB]
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en
Get:4 http://mirrordirector.raspbian.org wheezy/contrib armhf Packages [23.6 kB]Get:5 http://mirrordirector.raspbian.org wheezy/non-free armhf Packages [49.3 kB]
Get:6 http://mirrordirector.raspbian.org wheezy/rpi armhf Packages [592 B]
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Fetched 6,992 kB in 17s (405 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
autoconf is already the newest version.
automake is already the newest version.
autotools-dev is already the newest version.
gcc-4.7 is already the newest version.
libfuse-dev is already the newest version.
libtool is already the newest version.
libusb-dev is already the newest version.
php5-dev is already the newest version.
python2.7-dev is already the newest version.
swig is already the newest version.
tcl8.5-dev is already the newest version.
i2c-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
********************************************************
* Installation de OWFS *
********************************************************
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'owfs-fuse' is not installed, so not removed
Package 'owhttpd' is not installed, so not removed
The following packages will be REMOVED:
libow-2.8-15* ow-shell* owfs-common* owserver*
0 upgraded, 0 newly installed, 4 to remove and 3 not upgraded.
After this operation, 987 kB disk space will be freed.
(Reading database ... 63835 files and directories currently installed.)
Removing owserver ...
[ ok ] Stopping 1-Wire TCP Server: owserver.
Purging configuration files for owserver ...
Removing libow-2.8-15:armhf ...
Purging configuration files for libow-2.8-15:armhf ...
Removing ow-shell ...
Removing owfs-common ...
Purging configuration files for owfs-common ...
Processing triggers for man-db ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libow-2.8-15 owfs-common
The following NEW packages will be installed:
libow-2.8-15 ow-shell owfs-common owserver
0 upgraded, 4 newly installed, 0 to remove and 3 not upgraded.
Need to get 0 B/320 kB of archives.
After this operation, 987 kB of additional disk space will be used.
Selecting previously unselected package libow-2.8-15:armhf.
(Reading database ... 63789 files and directories currently installed.)
Unpacking libow-2.8-15:armhf (from .../libow-2.8-15_2.8p15-1_armhf.deb) ...
Selecting previously unselected package ow-shell.
Unpacking ow-shell (from .../ow-shell_2.8p15-1_armhf.deb) ...
Selecting previously unselected package owfs-common.
Unpacking owfs-common (from .../owfs-common_2.8p15-1_all.deb) ...
Selecting previously unselected package owserver.
Unpacking owserver (from .../owserver_2.8p15-1_armhf.deb) ...
Processing triggers for man-db ...
Setting up libow-2.8-15:armhf (2.8p15-1) ...
Setting up ow-shell (2.8p15-1) ...
Setting up owfs-common (2.8p15-1) ...
Creating config file /etc/owfs.conf with new version
Setting up owserver (2.8p15-1) ...
[ ok ] Starting 1-Wire TCP Server: owserver.
********************************************************
* Configuration OWFS avec dongle USB *
********************************************************
Configuration par defaut: dongle 1-wire/USB DS9490R
********************************************************
* Lancement du daemon OWFS avec dongle USB *
********************************************************
[ ok ] Restarting 1-Wire TCP Server: owserver.
********************************************************
* List des composants 1-wire install+©s *
********************************************************
****************************************************************************
* Installation termine *
****************************************************************************
jeedom@jeedom ~ $
Voila ce que j'obtiens avec la sonde connectée.
(voir plus bas)
Et voici le script d'installation avec ma sonde d’essai connectée. Hier j'ai réessayé et dans la liste des composants, elle était présente mais plus maintenant.
jeedom@jeedom ~ $ wget -q -O - http://localhost/plugins/onewire/ressou ... install.sh | sudo bash
****************************************************************************
* Make sure that the i2c-bus module is not included in the blacklist file *
****************************************************************************
#blacklist i2c-bcm2708
******************************************************************
* Make sure that the i2c-dev module is included in /etc/modules *
******************************************************************
i2c-dev est deja dans le fichier /etc/modules
********************************************************
* Installation des dependances *
********************************************************
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://raspberrypi.collabora.com wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release
Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B]
Hit http://raspberrypi.collabora.com wheezy Release
Get:2 http://mirrordirector.raspbian.org wheezy Release [14.4 kB]
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages
Get:3 http://mirrordirector.raspbian.org wheezy/main armhf Packages [6,903 kB]
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en
Get:4 http://mirrordirector.raspbian.org wheezy/contrib armhf Packages [23.6 kB]Get:5 http://mirrordirector.raspbian.org wheezy/non-free armhf Packages [49.3 kB]
Get:6 http://mirrordirector.raspbian.org wheezy/rpi armhf Packages [592 B]
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Fetched 6,992 kB in 17s (405 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
autoconf is already the newest version.
automake is already the newest version.
autotools-dev is already the newest version.
gcc-4.7 is already the newest version.
libfuse-dev is already the newest version.
libtool is already the newest version.
libusb-dev is already the newest version.
php5-dev is already the newest version.
python2.7-dev is already the newest version.
swig is already the newest version.
tcl8.5-dev is already the newest version.
i2c-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
********************************************************
* Installation de OWFS *
********************************************************
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'owfs-fuse' is not installed, so not removed
Package 'owhttpd' is not installed, so not removed
The following packages will be REMOVED:
libow-2.8-15* ow-shell* owfs-common* owserver*
0 upgraded, 0 newly installed, 4 to remove and 3 not upgraded.
After this operation, 987 kB disk space will be freed.
(Reading database ... 63835 files and directories currently installed.)
Removing owserver ...
[ ok ] Stopping 1-Wire TCP Server: owserver.
Purging configuration files for owserver ...
Removing libow-2.8-15:armhf ...
Purging configuration files for libow-2.8-15:armhf ...
Removing ow-shell ...
Removing owfs-common ...
Purging configuration files for owfs-common ...
Processing triggers for man-db ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libow-2.8-15 owfs-common
The following NEW packages will be installed:
libow-2.8-15 ow-shell owfs-common owserver
0 upgraded, 4 newly installed, 0 to remove and 3 not upgraded.
Need to get 0 B/320 kB of archives.
After this operation, 987 kB of additional disk space will be used.
Selecting previously unselected package libow-2.8-15:armhf.
(Reading database ... 63789 files and directories currently installed.)
Unpacking libow-2.8-15:armhf (from .../libow-2.8-15_2.8p15-1_armhf.deb) ...
Selecting previously unselected package ow-shell.
Unpacking ow-shell (from .../ow-shell_2.8p15-1_armhf.deb) ...
Selecting previously unselected package owfs-common.
Unpacking owfs-common (from .../owfs-common_2.8p15-1_all.deb) ...
Selecting previously unselected package owserver.
Unpacking owserver (from .../owserver_2.8p15-1_armhf.deb) ...
Processing triggers for man-db ...
Setting up libow-2.8-15:armhf (2.8p15-1) ...
Setting up ow-shell (2.8p15-1) ...
Setting up owfs-common (2.8p15-1) ...
Creating config file /etc/owfs.conf with new version
Setting up owserver (2.8p15-1) ...
[ ok ] Starting 1-Wire TCP Server: owserver.
********************************************************
* Configuration OWFS avec dongle USB *
********************************************************
Configuration par defaut: dongle 1-wire/USB DS9490R
********************************************************
* Lancement du daemon OWFS avec dongle USB *
********************************************************
[ ok ] Restarting 1-Wire TCP Server: owserver.
********************************************************
* List des composants 1-wire install+©s *
********************************************************
****************************************************************************
* Installation termine *
****************************************************************************
jeedom@jeedom ~ $
- Pièces jointes
-
- Sans titre.jpg (29.31 Kio) Consulté 950 fois
Re: [Plugin] 1wire - OWFS
Ton install est ok
Connect ta sonde puis fait un owdir et envoi moi un screen
Envoyé de mon D6503 en utilisant Tapatalk
Connect ta sonde puis fait un owdir et envoi moi un screen
Envoyé de mon D6503 en utilisant Tapatalk
Dernière édition par mickeys le 10 juin 2015, 19:19, édité 1 fois.
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Envois un screen avec ta sonde de connecté et owdirtwiste 79 a écrit :Bonjour, merci pour ton retour rapide.
Voila ce que j'obtiens avec la sonde connectée.
(voir plus bas)
Et voici le script d'installation avec ma sonde d’essai connectée. Hier j'ai réessayé et dans la liste des composants, elle était présente mais plus maintenant.
jeedom@jeedom ~ $ wget -q -O - http://localhost/plugins/onewire/ressou ... install.sh | sudo bash
****************************************************************************
* Make sure that the i2c-bus module is not included in the blacklist file *
****************************************************************************
#blacklist i2c-bcm2708
******************************************************************
* Make sure that the i2c-dev module is included in /etc/modules *
******************************************************************
i2c-dev est deja dans le fichier /etc/modules
********************************************************
* Installation des dependances *
********************************************************
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://raspberrypi.collabora.com wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release
Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B]
Hit http://raspberrypi.collabora.com wheezy Release
Get:2 http://mirrordirector.raspbian.org wheezy Release [14.4 kB]
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages
Get:3 http://mirrordirector.raspbian.org wheezy/main armhf Packages [6,903 kB]
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en
Get:4 http://mirrordirector.raspbian.org wheezy/contrib armhf Packages [23.6 kB]Get:5 http://mirrordirector.raspbian.org wheezy/non-free armhf Packages [49.3 kB]
Get:6 http://mirrordirector.raspbian.org wheezy/rpi armhf Packages [592 B]
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Fetched 6,992 kB in 17s (405 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
autoconf is already the newest version.
automake is already the newest version.
autotools-dev is already the newest version.
gcc-4.7 is already the newest version.
libfuse-dev is already the newest version.
libtool is already the newest version.
libusb-dev is already the newest version.
php5-dev is already the newest version.
python2.7-dev is already the newest version.
swig is already the newest version.
tcl8.5-dev is already the newest version.
i2c-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
********************************************************
* Installation de OWFS *
********************************************************
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'owfs-fuse' is not installed, so not removed
Package 'owhttpd' is not installed, so not removed
The following packages will be REMOVED:
libow-2.8-15* ow-shell* owfs-common* owserver*
0 upgraded, 0 newly installed, 4 to remove and 3 not upgraded.
After this operation, 987 kB disk space will be freed.
(Reading database ... 63835 files and directories currently installed.)
Removing owserver ...
[ ok ] Stopping 1-Wire TCP Server: owserver.
Purging configuration files for owserver ...
Removing libow-2.8-15:armhf ...
Purging configuration files for libow-2.8-15:armhf ...
Removing ow-shell ...
Removing owfs-common ...
Purging configuration files for owfs-common ...
Processing triggers for man-db ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libow-2.8-15 owfs-common
The following NEW packages will be installed:
libow-2.8-15 ow-shell owfs-common owserver
0 upgraded, 4 newly installed, 0 to remove and 3 not upgraded.
Need to get 0 B/320 kB of archives.
After this operation, 987 kB of additional disk space will be used.
Selecting previously unselected package libow-2.8-15:armhf.
(Reading database ... 63789 files and directories currently installed.)
Unpacking libow-2.8-15:armhf (from .../libow-2.8-15_2.8p15-1_armhf.deb) ...
Selecting previously unselected package ow-shell.
Unpacking ow-shell (from .../ow-shell_2.8p15-1_armhf.deb) ...
Selecting previously unselected package owfs-common.
Unpacking owfs-common (from .../owfs-common_2.8p15-1_all.deb) ...
Selecting previously unselected package owserver.
Unpacking owserver (from .../owserver_2.8p15-1_armhf.deb) ...
Processing triggers for man-db ...
Setting up libow-2.8-15:armhf (2.8p15-1) ...
Setting up ow-shell (2.8p15-1) ...
Setting up owfs-common (2.8p15-1) ...
Creating config file /etc/owfs.conf with new version
Setting up owserver (2.8p15-1) ...
[ ok ] Starting 1-Wire TCP Server: owserver.
********************************************************
* Configuration OWFS avec dongle USB *
********************************************************
Configuration par defaut: dongle 1-wire/USB DS9490R
********************************************************
* Lancement du daemon OWFS avec dongle USB *
********************************************************
[ ok ] Restarting 1-Wire TCP Server: owserver.
********************************************************
* List des composants 1-wire install+[COPYRIGHT SIGN]s *
********************************************************
****************************************************************************
* Installation termine *
****************************************************************************
jeedom@jeedom ~ $
Envoyé de mon D6503 en utilisant Tapatalk
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Voila le screen avec ma sonde
Donc a priori elle est reconnu par son ID /28XXXXXXXXXXX ou /81XXXXXXXXXXXX
Après sa comment se passe la programmation dans le plugin? car le lien a partir de Jeedom ne même nul par pour l'aide
Donc a priori elle est reconnu par son ID /28XXXXXXXXXXX ou /81XXXXXXXXXXXX
Après sa comment se passe la programmation dans le plugin? car le lien a partir de Jeedom ne même nul par pour l'aide
- Pièces jointes
-
- capture.png (83.39 Kio) Consulté 963 fois
Re: [Plugin] 1wire - OWFS
Ok effectivement l install est bonne. Peut tu me dire si tu as deq log ds nginx.error stp lié au plugin
Envoyé de mon D6503 en utilisant Tapatalk
Envoyé de mon D6503 en utilisant Tapatalk
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Voila les erreurs que j'ai dans les logs nginx.error
2015/06/10 20:40:55 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:41:01 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
2015/06/10 20:41:17 [error] 18725#0: *305337 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=one ... cessFull=1"
2015/06/10 20:42:05 [error] 18727#0: *305666 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:42:50 [error] 18726#0: *305773 FastCGI sent in stderr: "PHP message: PHP Fatal error: Call to a member function getConfiguration() on a non-object in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/modal/configure.device.php on line 32" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&plugin=onewire&modal=configure.device&id=426 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
2015/06/10 20:40:55 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:41:01 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
2015/06/10 20:41:17 [error] 18725#0: *305337 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=one ... cessFull=1"
2015/06/10 20:42:05 [error] 18727#0: *305666 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:42:50 [error] 18726#0: *305773 FastCGI sent in stderr: "PHP message: PHP Fatal error: Call to a member function getConfiguration() on a non-object in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/modal/configure.device.php on line 32" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&plugin=onewire&modal=configure.device&id=426 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
Re: [Plugin] 1wire - OWFS
Ok il y a un fatal erreur je regarde et pousse une mise à jour
Envoyé de mon D6503 en utilisant Tapatalk
Envoyé de mon D6503 en utilisant Tapatalk
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
j ai eu le meme probleme et je l ai resolu :twiste 79 a écrit :Voila les erreurs que j'ai dans les logs nginx.error
2015/06/10 20:40:55 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:41:01 [error] 18728#0: *305330 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
2015/06/10 20:41:17 [error] 18725#0: *305337 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire&id=426&saveSuccessFull=1 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=one ... cessFull=1"
2015/06/10 20:42:05 [error] 18727#0: *305666 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined variable: listemail in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/php/onewire.php on line 13" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&m=onewire&p=onewire HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&p=log"
2015/06/10 20:42:50 [error] 18726#0: *305773 FastCGI sent in stderr: "PHP message: PHP Fatal error: Call to a member function getConfiguration() on a non-object in /usr/share/nginx/www/jeedom/plugins/onewire/desktop/modal/configure.device.php on line 32" while reading response header from upstream, client: 192.168.1.5, server: , request: "GET /index.php?v=d&plugin=onewire&modal=configure.device&id=426 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.11", referrer: "http://192.168.1.11/index.php?v=d&m=onewire&p=onewire"
reinstalle le plugin
Général / plugin / 1wire / voir sur le market / installer la béta
ca a marché chez moi
dit moi si c est mieux
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Bonsoir,
J'envisage l'achat de ce boitier serveur 1wire ethernet que j'utiliserai avec le plugin 1wire pour mesurer la température de chaque pièce (via des 18DS20) : http://www.domadoo.fr/fr/peripheriques/ ... er-v2.html
Pouvez-vous me confirmer que ce matériel est compatible avec le plugin en mode "owfs" déporté ?
Merci.
PS : quid de la mesure d'humidité ?
J'envisage l'achat de ce boitier serveur 1wire ethernet que j'utiliserai avec le plugin 1wire pour mesurer la température de chaque pièce (via des 18DS20) : http://www.domadoo.fr/fr/peripheriques/ ... er-v2.html
Pouvez-vous me confirmer que ce matériel est compatible avec le plugin en mode "owfs" déporté ?
Merci.
PS : quid de la mesure d'humidité ?
DIY 4*2GHz - 4Go RAM - SSD
- ctrl 1-wire Dallas + IPX800 + X880
- ctrl RFXcom + Oregon (température) + Anémomètre
- ctrl Gen5 + Wallplug + fgrm-222 + Benext + Everspring AN157-6 + Aeon Key Fob+ ...
- ctrl 1-wire Dallas + IPX800 + X880
- ctrl RFXcom + Oregon (température) + Anémomètre
- ctrl Gen5 + Wallplug + fgrm-222 + Benext + Everspring AN157-6 + Aeon Key Fob+ ...
Re: [Plugin] 1wire - OWFS
Bonsoir.
Une personne à déjà testé ce module et il n est pas compatible avec le plugin 1wire.
Peut être avec la dernière mise à jour du boîtier mais rien de sur.
Je te conseille de dongle usb qui est fiable
Envoyé de mon D6503 en utilisant Tapatalk
Une personne à déjà testé ce module et il n est pas compatible avec le plugin 1wire.
Peut être avec la dernière mise à jour du boîtier mais rien de sur.
Je te conseille de dongle usb qui est fiable
Envoyé de mon D6503 en utilisant Tapatalk
Plugins Jeedom :
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
- Plugin 1-Wire
- Plugin GPIO
- Plugin Suivi Conso - Multi-équipement et compteur Eau
Re: [Plugin] 1wire - OWFS
Je vient de le réinstaller et des que je programme un module à la sauvegarde j'ai la roue crantée qui apparaît mais ne disparaît jamais , j'avais eu le même problème avec le zwave et c'était du à la version bêta du plugin
Envoyé de mon SM-A300FU en utilisant Tapatalk
Envoyé de mon SM-A300FU en utilisant Tapatalk
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 15 invités