Re: [Plugin Tiers][Sujet Principal] Motion
Publié : 14 janv. 2019, 19:16
Des snap oui. J'ai activé le cadre rouge mais celui-ci n'est pas dans la zone bleu.
Forum sur Jeedom
https://www.jeedom.com/forum/
Code : Tout sélectionner
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] motion_startup: Motion 4.2.1+git1faacf1 Started
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] motion_startup: Using log type (ALL) log level (NTC)
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] become_daemon: Motion going to daemon mode
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] motion_startup: Motion running as daemon process
[0:motion] [NTC] [STR] [Jan 19 06:55:39] webu_start_strm: Starting camera 199 stream on port 1935
[0:motion] [NTC] [STR] [Jan 19 06:55:39] webu_strm_ntc: Started camera 199 stream on port 1935
[0:motion] [NTC] [STR] [Jan 19 06:55:39] webu_start_ctrl: Starting webcontrol on port 8080
[0:motion] [NTC] [STR] [Jan 19 06:55:39] webu_start_ctrl: Started webcontrol on port 8080
[0:motion] [NTC] [ENC] [Jan 19 06:55:39] ffmpeg_global_init: ffmpeg libavcodec version 56.1.0 libavformat version 56.1.0
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] translate_init: Language: English
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[0:motion] [NTC] [ALL] [Jan 19 06:55:39] main: Waiting for threads to finish, pid: 11553
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:39] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:39] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:39] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:39] netcam_read_first_header: Removed netcam Keep-Alive flag due to apparent closed HTTP connection.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:39] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:39] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:39] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:39] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:39] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:39] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:39] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:40] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:55:40] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:55:40] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:55:40] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:40] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:40] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:40] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:40] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:40] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:55:41] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:55:41] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:55:41] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:41] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:41] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:41] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:41] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:41] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:41] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:41] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:41] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:41] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:41] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:50] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:50] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:55:50] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:55:50] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:55:50] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:50] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:50] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:50] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:50] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:50] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:50] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:55:51] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:55:51] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:55:51] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:51] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:55:51] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:51] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:51] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:55:51] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:55:51] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:55:51] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:51] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:55:51] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:55:51] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:00] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:00] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:00] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:00] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:00] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:00] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:00] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:00] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:00] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:00] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:00] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:01] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:01] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:01] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:01] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:01] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:01] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:01] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:01] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:01] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:01] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:01] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:01] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:01] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [NTC] [EVT] [Jan 19 06:56:01] event_newfile: File of type 1 saved to: /var/www/html/tmp/motion/199//01-20190119065601-snapshot.jpg
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:10] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:10] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:10] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:10] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:10] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:10] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:10] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:10] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:10] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:10] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:10] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:10] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:10] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:10] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:10] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:10] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:10] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:10] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:10] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:10] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:10] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:11] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:11] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:11] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:11] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:11] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:11] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:11] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:11] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:11] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:11] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:11] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:11] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:11] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:14] mlp_capture: Video signal lost - Adding grey image
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:20] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:20] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:20] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:20] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:20] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:20] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:20] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:20] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:20] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:20] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:20] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:20] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:20] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:20] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:20] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:20] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:20] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:20] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:20] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:20] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:20] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:21] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:21] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:21] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:21] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:21] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:21] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:21] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:21] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:21] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:21] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:21] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:21] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:21] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:30] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:30] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:30] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:30] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:30] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:30] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:30] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:30] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:30] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:30] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:30] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:30] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:30] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:30] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:30] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:30] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:30] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:30] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:30] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:30] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:30] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:31] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:31] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:31] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:31] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:31] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:31] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:31] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:31] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:31] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:31] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:31] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:31] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:31] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:40] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:40] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:40] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:40] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:40] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:40] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:40] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:40] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:40] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:40] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:40] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:40] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:40] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:41] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:41] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:41] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:41] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:41] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:41] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:41] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:41] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:41] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:41] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:41] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:41] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:41] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:50] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:50] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:50] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:50] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:50] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:50] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:50] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:50] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:50] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:50] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:50] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:50] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:50] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:50] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:50] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:56:51] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:56:51] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:56:51] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:51] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:56:51] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:51] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:51] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:56:51] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:56:51] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:56:51] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:51] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:56:51] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:56:51] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:00] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:57:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:57:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:57:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:00] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:57:00] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:57:00] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:57:00] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:00] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:57:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:57:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:57:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:00] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:00] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:00] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:00] mlp_retry: Retrying until successful connection with camera
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:57:00] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:00] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:57:00] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:57:00] vid_start: Netcam failed to open
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:00] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Jan 19 06:57:01] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Jan 19 06:57:01] motion_start_thread: Camera ID: 199 is from /etc/motion/camera199.conf
[0:motion] [NTC] [ALL] [Jan 19 06:57:01] motion_start_thread: Camera ID: 199 Camera Name: Motion ext Service: http:
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:01] motion_init: Camera 199 started: motion detection Enabled
[1:ml1:Motion ext] [NTC] [VID] [Jan 19 06:57:01] vid_start: Opening Netcam
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:01] netcam_start: Network Camera starting for camera (Motion ext)
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:01] netcam_setup_html: connected, going on to read image.
[1:ml1:Motion ext] [NTC] [NET] [Jan 19 06:57:01] netcam_read_html_jpeg: disconnecting netcam since keep-alive not set.
[1:ml1:Motion ext] [CRT] [NET] [Jan 19 06:57:01] netcam_start: libjpeg decompression failure on first frame - giving up!
[1:ml1:Motion ext] [ERR] [VID] [Jan 19 06:57:01] vid_start: Netcam failed to open
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:01] motion_init: Could not fetch initial image from camera
[1:ml1:Motion ext] [WRN] [ALL] [Jan 19 06:57:01] motion_init: Motion continues using width and height from config file(s)
[1:ml1:Motion ext] [NTC] [ALL] [Jan 19 06:57:01] image_ring_resize: Resizing pre_capture buffer to 1 items
Merci a toi d'avoir pris le temps de me répondre
Bonsoir,remyg83 a écrit : ↑03 mars 2019, 10:46Bonjour , j'ai installé le plugin motion pour une wanscam hw0043, tout fonctionne bien après paramétrage.
J'ai une question, je voudrais utiliser uniquement la commande détection qui me déclenche plusieurs scenario (lumières en fonction de différents états, alarme, jour/nuit, etc...), et qui me déclenche également un scénario pour démarrer l'enregistrement sur un NAS syno par surveillance station.
Jusque la, tout fonctionne nikel (détection au top et beaucoup moins de fausses détections)
Par contre est ce possible d'enlever l'enregistrement des photos et vidéos sur jeedom car du coup ca fait double emploi avec mon nas, et ca me permettrait d'alléger mon jeedom.
Merci d'avance à tous, et un grand bravo à Mikant28, j'utilise plusieurs de ses plugins!!