[Plugin Tiers][Sujet Principal] OpenALPR
-
- Timide
- Messages : 134
- Inscription : 14 oct. 2017, 09:33
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Les log de alprd ressemblent à ca:
INFO - Video stream connecting...
INFO - Video stream connected
WARN - Stream http://macam//cgi-bin/CGIProxy.fcgi?cmd ... =file.mjpg received invalid frame
INFO - Video stream connecting...
INFO - Video stream connected
WARN - Stream http://macam//cgi-bin/CGIProxy.fcgi?cmd ... =file.mjpg received invalid frame
C'est dommage il manque la date/heure dans le log alpr.
INFO - Video stream connecting...
INFO - Video stream connected
WARN - Stream http://macam//cgi-bin/CGIProxy.fcgi?cmd ... =file.mjpg received invalid frame
INFO - Video stream connecting...
INFO - Video stream connected
WARN - Stream http://macam//cgi-bin/CGIProxy.fcgi?cmd ... =file.mjpg received invalid frame
C'est dommage il manque la date/heure dans le log alpr.
VM pour Jeedom sur un macmini.
Matériel: KNX (principalement Hager), Xiaomi
Matériel: KNX (principalement Hager), Xiaomi
-
- Timide
- Messages : 134
- Inscription : 14 oct. 2017, 09:33
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Voila a quoi ressemble la seule image qui a marché ce matin pour ma seconde voiture.
C'est un peu vue de haut mais ca me semble pas mal pour voir la plaque VM pour Jeedom sur un macmini.
Matériel: KNX (principalement Hager), Xiaomi
Matériel: KNX (principalement Hager), Xiaomi
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Je viens de poussé une mise a jours avec un changement de stratégie sur le temps d'attente.
Je passe tout en cache ce qui devrait etre plus rapide
Je passe tout en cache ce qui devrait etre plus rapide
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
-
- Timide
- Messages : 134
- Inscription : 14 oct. 2017, 09:33
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Super merci. Je viens de faire la maj, je te tiens au courant au prochain passage
VM pour Jeedom sur un macmini.
Matériel: KNX (principalement Hager), Xiaomi
Matériel: KNX (principalement Hager), Xiaomi
-
- Timide
- Messages : 18
- Inscription : 21 janv. 2017, 17:39
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Bonjour à tous,
Avant de me lancer, avez vous des conseils sur le choix de la caméra pour un jeedom sur un Raspberry Pi 3 ?
Avant de me lancer, avez vous des conseils sur le choix de la caméra pour un jeedom sur un Raspberry Pi 3 ?
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Le choix de la camera n'a pas vraiment d'importance.
Ce qui est vital pour une bonne detection c'est l'emplacement de la camera et surtout la possibilité de zoomer sur les plaque.
Il est donc plutot recommandé d'avoir une camera dedié et du faire un zoom max sur la zone de plaque
Ce qui est vital pour une bonne detection c'est l'emplacement de la camera et surtout la possibilité de zoomer sur les plaque.
Il est donc plutot recommandé d'avoir une camera dedié et du faire un zoom max sur la zone de plaque
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Bonjour, tout d'abord merci pour le plugin qui a l'air bien pratique.
Je viens vers vous car j'ai un soucis que je ne comprend pas. Lors de l'installation de ce dernier tout semble bien se passé au début mais rien ne fonctionne et dans les logs je tombe la dessus :
*****************************************************************************************************
* Installing additional libraries *
*****************************************************************************************************
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
*****************************************************************************************************
* Compile openalpr: *
*****************************************************************************************************
Cloning into 'openalpr'...
/var/www/html/plugins/openalpr/core/class/../../ressources/install.sh: line 49: cmake: command not found
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target 'install'. Stop.
*****************************************************************************************************
* Fin de l'installation *
*****************************************************************************************************
Si jamais quelqu'un a une idée pour corriger ça, je suis preneur.
Merci à tous
Fabien
Je viens vers vous car j'ai un soucis que je ne comprend pas. Lors de l'installation de ce dernier tout semble bien se passé au début mais rien ne fonctionne et dans les logs je tombe la dessus :
*****************************************************************************************************
* Installing additional libraries *
*****************************************************************************************************
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
E: Command line option 'a' [from -allow] is not understood in combination with the other options.
*****************************************************************************************************
* Compile openalpr: *
*****************************************************************************************************
Cloning into 'openalpr'...
/var/www/html/plugins/openalpr/core/class/../../ressources/install.sh: line 49: cmake: command not found
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target 'install'. Stop.
*****************************************************************************************************
* Fin de l'installation *
*****************************************************************************************************
Si jamais quelqu'un a une idée pour corriger ça, je suis preneur.
Merci à tous
Fabien
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Sur quel machine est tu?
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Alors j’ai un intel Z83 avec Debian dessus
Re: [Plugin Tiers][Sujet Principal] OpenALPR
visiblement il n'aime pas une option de commande d'installation
Sait tu te connecter en SSH?
si oui peut tu tester d'installer ses dependances avec et sans le -allow
Sinon je les ai enlever pour la prochaine release demain
Sait tu te connecter en SSH?
si oui peut tu tester d'installer ses dependances avec et sans le -allow
Code : Tout sélectionner
sudo apt-get install -y -allow autoconf automake libtool
sudo apt-get install -y -allow pkg-config
sudo apt-get install -y -allow libpng12-dev
sudo apt-get install -y -allow libjpeg62-turbo-dev
sudo apt-get install -y -allow libtiff4-dev
sudo apt-get install -y -allow zlib1g-dev
sudo apt-get install -y -allow git
sudo apt-get install -y -allow git-core
sudo apt-get install -y -allow cmake
sudo apt-get install -y -allow liblog4cplus-dev
sudo apt-get install -y -allow libcurl3-dev
sudo apt-get install -y -allow uuid-dev
sudo apt-get install -y -allow build-essential
sudo apt-get install -y -allow libjpeg8-dev libjasper-dev
sudo apt-get install -y -allow libgtk2.0-dev
sudo apt-get install -y -allow libavcodec-dev libavformat-dev libswscale-dev libv4l-dev
sudo apt-get install -y -allow libatlas-base-dev gfortran
sudo apt-get install -y -allow python2.7-dev
sudo apt-get install -y -allow libopencv-dev
sudo apt-get install -y -allow libtesseract-dev
sudo apt-get install -y -allow libleptonica-dev
sudo apt-get install -y -allow beanstalkd
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Merci pour la réponse.
Je viens de tester et des la première lignes j'ai un echec : "E: Command line option 'a' [from -allow]"
Je vais essayé sans le allow pour voir
Je viens de tester et des la première lignes j'ai un echec : "E: Command line option 'a' [from -allow]"
Je vais essayé sans le allow pour voir
-
- Timide
- Messages : 134
- Inscription : 14 oct. 2017, 09:33
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Salut mika,
Une petite demande pour le plugin: est-ce qu'il serait possible de désactiver l'historique lors de la création de plaque automatique?
Je me suis rendu compte d'un truc, c'est que ma camera qui est face au portail fout le bordel.
J'ai un portail à barreau et OpenALPR me genere plein de plaque car je pense qu'il confond les barre avec des 1
Du coup pendant mes vacances il m'a generé des milliers de plaques et chacune avec l'historique activé.
merci,
Flo
Une petite demande pour le plugin: est-ce qu'il serait possible de désactiver l'historique lors de la création de plaque automatique?
Je me suis rendu compte d'un truc, c'est que ma camera qui est face au portail fout le bordel.
J'ai un portail à barreau et OpenALPR me genere plein de plaque car je pense qu'il confond les barre avec des 1
Du coup pendant mes vacances il m'a generé des milliers de plaques et chacune avec l'historique activé.
merci,
Flo
VM pour Jeedom sur un macmini.
Matériel: KNX (principalement Hager), Xiaomi
Matériel: KNX (principalement Hager), Xiaomi
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Ca sera sur la prochaine beta.
Cette option de plaque inconnue est problématique car en fait tous les faux positif sont ajouté.
Je pense la supprimé
Cette option de plaque inconnue est problématique car en fait tous les faux positif sont ajouté.
Je pense la supprimé
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Oui mais la detection de plaque inconnu est aussi une bonne chose pour une voiture qui passe et qui n'a rien a faire ici, cela ajoute un peu a la securité avec le snapshot.
Re: [Plugin Tiers][Sujet Principal] OpenALPR
oui je sais d'ou mon hésitation.
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
-
- Timide
- Messages : 134
- Inscription : 14 oct. 2017, 09:33
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Vu que c'est une option c'est tres bien. Ca permet de voir un peu ce qui se passe.
Mais ce n'est pas la pein d'activer l'historique sur cette entrée
Mais ce n'est pas la pein d'activer l'historique sur cette entrée
VM pour Jeedom sur un macmini.
Matériel: KNX (principalement Hager), Xiaomi
Matériel: KNX (principalement Hager), Xiaomi
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Oui c'est mise sur la version de demain
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Salut,
Je viens de lancer la mise a jour et j'ai eu un beau plantage ! plus d'acces en web mais que en SSH.
J'ai reussi a m'en sortir en faisant la procedure "d'urgence" pour restaurer le backup de cette nuit en SSH : viewtopic.php?f=189&t=34937&p=595600&hi ... sh#p595600
je sais pas ce qu'il y a eu mais je vais attendre encore un peu pour relancer la derniere mise a jour.
Je viens de lancer la mise a jour et j'ai eu un beau plantage ! plus d'acces en web mais que en SSH.
J'ai reussi a m'en sortir en faisant la procedure "d'urgence" pour restaurer le backup de cette nuit en SSH : viewtopic.php?f=189&t=34937&p=595600&hi ... sh#p595600
je sais pas ce qu'il y a eu mais je vais attendre encore un peu pour relancer la derniere mise a jour.
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Ha je vais regarder ca.
J'ai pas eu de problème chez moi.
D'autre on eu le problème ?
Sinon faite attention au cas ou
J'ai pas eu de problème chez moi.
D'autre on eu le problème ?
Sinon faite attention au cas ou
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Re: [Plugin Tiers][Sujet Principal] OpenALPR
Effectivement il y avait bien un bug.
Je ne l'avais pas vue car j'avais desactivé le plugin lors de ma recherche de ce qui me faisait planté mon jeedom.
La mise a jours est sur le market
Désolé du désagrement
Je ne l'avais pas vue car j'avais desactivé le plugin lors de ma recherche de ce qui me faisait planté mon jeedom.
La mise a jours est sur le market
Désolé du désagrement
Pour faciliter la compréhension de votre problème, n’oubliez pas de poster
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
- Des Screenshots de votre configuration
- Le Log au moment du problème constaté
Encouragez-moi https://www.paypal.me/mikant28
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 16 invités