Creation d'un serveur Nut

[Idaho947]

Bonjour,

je tente d'installer un serveur nut pout suivre via jeedom le comportement de mon onduleur Nitram v600.
Des l'installation sur mon raspberry j'ai des erreurs :

Setting up nut-server (2.7.4-5) ...
Job for nut-server.service failed because the control process exited with error code.
See "systemctl status nut-server.service" and "journalctl -xe" for details.
invoke-rc.d: initscript nut-server, action "start" failed.
● nut-server.service - Network UPS Tools - power devices information server
Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Fri 2019-03-22 17:03:32 UTC; 274ms ago
Process: 24263 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)

Mar 22 17:03:31 raspberrypi systemd[1]: Starting Network UPS Tools - power d…...
Mar 22 17:03:32 raspberrypi systemd[1]: nut-server.service: Control process …s=1
Mar 22 17:03:32 raspberrypi systemd[1]: Failed to start Network UPS Tools - …er.
Mar 22 17:03:32 raspberrypi systemd[1]: nut-server.service: Unit entered fai…te.
Mar 22 17:03:32 raspberrypi systemd[1]: nut-server.service: Failed with resu…e'.
Hint: Some lines were ellipsized, use -l to show in full.
dpkg: error processing package nut-server (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut:
nut depends on nut-server; however:
Package nut-server is not configured yet.

dpkg: error processing package nut (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nut-server
nut

Est ce que quelqu'un peut m'aider ?