Plugin Téléinfo problème ftdi

[dalcorso]

Bonjour
Je viens d'installer Jeedom sur raspberry PI 3 model B et je n'arrive pas à faire fonctionner la teleinfo 2 compteurs
J'ai le message d'erreur suivant :
Traceback (most recent call last):
File "/var/www/html/plugins/teleinfo/ressources/teleinfo_2_cpt.py", line 58, in <module>
import ftdi1 as ftdi
ImportError: No module named ftdi1

Quelqu'un aurai-t-il s'il vous plaît une idée ou la solution à mon problème. Merci d'avance

Coté système tout a l'air correct :
dmesg |grep usb
[ 0.071900] usbcore: registered new interface driver usbfs
[ 0.071976] usbcore: registered new interface driver hub
[ 0.072088] usbcore: registered new device driver usb
[ 0.311418] usbcore: registered new interface driver lan78xx
[ 0.313986] usbcore: registered new interface driver smsc95xx
[ 0.346742] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.791590] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.793870] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.796188] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.803164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.807667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.810077] usb usb1: Product: DWC OTG Controller
[ 0.812465] usb usb1: Manufacturer: Linux 4.19.58-v7+ dwc_otg_hcd
[ 0.814890] usb usb1: SerialNumber: 3f980000.usb
[ 0.823196] usbcore: registered new interface driver usb-storage
[ 0.854891] usbcore: registered new interface driver usbhid
[ 0.857524] usbhid: USB HID core driver
[ 1.251900] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.492206] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.497498] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.831884] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.963956] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.970097] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.076288] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:68:89:c0
[ 2.191966] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
[ 2.353568] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ 2.359324] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.362368] usb 1-1.5: Product: Interface USB -> Compteur
[ 2.365432] usb 1-1.5: Manufacturer: Cartelectronic
[ 2.368407] usb 1-1.5: SerialNumber: C10725
[ 4.161391] usbcore: registered new interface driver usbserial_generic
[ 4.161463] usbserial: USB Serial support registered for generic
[ 4.170597] usbcore: registered new interface driver brcmfmac
[ 4.179303] usbcore: registered new interface driver ftdi_sio
[ 4.179387] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4.180785] usb 1-1.5: Detected FT232RL
[ 4.181699] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB0

lsusb -v
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
bcdDevice 6.00
iManufacturer 1 Cartelectronic
iProduct 2 Interface USB -> Compteur
iSerial 3 C10725
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 Interface USB -> Compteur
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

[akenad]

Bonjour
Je viens d'installer Jeedom sur raspberry PI 3 model B et je n'arrive pas à faire fonctionner la teleinfo 2 compteurs
J'ai le message d'erreur suivant :
Traceback (most recent call last):
File "/var/www/html/plugins/teleinfo/ressources/teleinfo_2_cpt.py", line 58, in <module>
import ftdi1 as ftdi
ImportError: No module named ftdi1

Quelqu'un aurai-t-il s'il vous plaît une idée ou la solution à mon problème. Merci d'avance

Coté système tout a l'air correct :

Bonjour @dalcorso,

en SSH :

$ sudo apt-get install python-ftdi

Ou bien

$ sudo pip install ftdi

Mais tout cela peut aussi dépendre de la version de debian.

akenad

[dalcorso]

Bonjour Akenad,
Merci pour cette info qui m'a permit de résoudre mon problème.
Dans ma configuration j'ai juste du mettre sudo apt-get install python-ftdi1

Christian