[tuto] [Pi3] Jeedom netinstall direct sur SSD
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Hello cocapic !
Je suis en cours d'installation, après avoir descendu une SD avec raspbian afin de changer l'ordre de boot, cf ton 2ème post.
La j'installe les mises à jours sur le RPI en SSD.
Ensuite, install de jeedom, pour un jeedom qui va partir chez mes parents, le mien tourne bien comme il faut sur son hp gen 8 .
Merci pour ton travail
Je suis en cours d'installation, après avoir descendu une SD avec raspbian afin de changer l'ordre de boot, cf ton 2ème post.
La j'installe les mises à jours sur le RPI en SSD.
Ensuite, install de jeedom, pour un jeedom qui va partir chez mes parents, le mien tourne bien comme il faut sur son hp gen 8 .
Merci pour ton travail
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bon bah va falloir que je me penche la dessus.....
Tu vois pas d'ou pourrait venir le pb par hasard ?
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Une petite question qui me vient, est-ce que l'ip de mon Pi 3 va changer sur ma livebox après le passage en SSD ?
- Jeedom 4.0.11 RC DIY PI3 sur SSD sous Stretch
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
-
- Timide
- Messages : 229
- Inscription : 02 janv. 2017, 13:35
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Non, l'ip est lié a carte réseau de ton équipement ( adresse mac)
Envoyé de mon MI 5 en utilisant Tapatalk
Envoyé de mon MI 5 en utilisant Tapatalk
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Ok merci.
Matériel reçu, je lancerai l'opération ce soir ou demain.
J'imagine qu'il faut éteindre le PI3 proprement via Jeedom avant de retirer la sd et brancher le ssd ?
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
Matériel reçu, je lancerai l'opération ce soir ou demain.
J'imagine qu'il faut éteindre le PI3 proprement via Jeedom avant de retirer la sd et brancher le ssd ?
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
- Jeedom 4.0.11 RC DIY PI3 sur SSD sous Stretch
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
-
- Timide
- Messages : 229
- Inscription : 02 janv. 2017, 13:35
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Yep !Kyonyx a écrit :Ok merci.
Matériel reçu, je lancerai l'opération ce soir ou demain.
J'imagine qu'il faut éteindre le PI3 proprement via Jeedom avant de retirer la sd et brancher le ssd ?
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
Envoyé de mon MI 5 en utilisant Tapatalk
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bonjour,
Installation ok merci
Par contre en ssh quand je fais cette commande :
J'obtiens ce message :
Cela me donne ceci :
Installation ok merci
Par contre en ssh quand je fais cette commande :
Code : Tout sélectionner
sudo echo "max_usb_current=1" >> /boot/config.txt
J'ai tenté un-bash: /boot/config.txt: Permission denied
Code : Tout sélectionner
sudo chown www-data:www-data -R /boot
Une solution à me proposer svp ?chown: changing ownership of '/boot/overlays/adau7002-simple.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/README': Operation not permitted
chown: changing ownership of '/boot/overlays/adau1977-adc.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/akkordion-iqdacplus.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/ads1015.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/ads1115.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/ads7846.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/bmp085_i2c-sensor.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/audremap.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/allo-boss-dac-pcm512x-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/allo-digione.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/allo-piano-dac-pcm512x-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/allo-piano-dac-plus-pcm512x-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/at86rf233.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/audioinjector-addons.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/audioinjector-wm8731-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dionaudio-loco-v2.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dht11.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dionaudio-loco.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dpi18.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dpi24.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dwc-otg.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/dwc2.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/enc28j60-spi2.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/enc28j60.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/fe-pi-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/goodix.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/googlevoicehat-soundcard.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/gpio-ir.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/gpio-poweroff.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/gpio-shutdown.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hifiberry-amp.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hifiberry-dac.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hifiberry-dacplus.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hifiberry-digi-pro.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hifiberry-digi.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hy28a.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/hy28b.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-bcm2708.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-gpio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-mux.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-pwm-pca9685a.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-rtc-gpio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-rtc.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c-sensor.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c0-bcm2708.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2c1-bcm2708.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/i2s-gpio28-31.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/iqaudio-dac.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/iqaudio-dacplus.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/iqaudio-digi-wm8804-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/justboom-dac.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/justboom-digi.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/lirc-rpi.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mcp23017.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mcp23s17.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mcp2515-can0.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mcp2515-can1.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mcp3008.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/midi-uart0.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/midi-uart1.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mmc.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mpu6050.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/mz61581.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/papirus.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pi3-act-led.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pi3-disable-bt.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pi3-disable-wifi.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pi3-miniuart-bt.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/piscreen.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/piscreen2r.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pisound.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pitft22.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pitft28-capacitive.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pitft28-resistive.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pitft35-resistive.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pps-gpio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pwm-2chan.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/pwm.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/qca7000.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/raspidac3.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rotary-encoder.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-backlight.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-cirrus-wm5102.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-dac.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-display.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-ft5406.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-proto.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-sense.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rpi-tv.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/rra-digidac1-wm8741-audio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sc16is750-i2c.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sc16is752-spi1.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sdhost.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sdio-1bit.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sdio.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/sdtweak.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/smi-dev.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/smi-nand.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/smi.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/spi-gpio35-39.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/spi-rtc.dtbo': Operation not permitted
chown: changing ownership of '/boot/overlays/spi0-cs.dtbo': Operation not permitted
- Jeedom 4.0.11 RC DIY PI3 sur SSD sous Stretch
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Oui fait un "sudo su" puis repasse la commande.
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Cette fois ça semble passer.
Merci.
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
Merci.
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
- Jeedom 4.0.11 RC DIY PI3 sur SSD sous Stretch
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
- BLEA | Z-WAVE PLUS (GEN5) | Broadlink RMpro | RFPlayer | Xiaomi | Hue
- Google Home | Thermostat Netatmo | Volets Somfy | Diffuseur E-Air
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bonjour cocapic,
Petit plantage alors je réinstalles tout, mais je sais que j'avais eu des soucis car la première fois, je n'avais pas assez d'espace sur le sda2
Je boot bien dessus, tout est OK, mais il fait 1,7Go :
J'aimerai avant de faire l'instal de jeedom redimensionner la sda2 avec le reste du sda, comment faire sans écraser le sda2 ?
En passant par raspi-config, cela ne fonctionne pas (cherche sd), avec rezisef2s idem (normale), et avec cfdisk, je n'ose pas trop de peur d'écraser la sda2.
Merci
Petit plantage alors je réinstalles tout, mais je sais que j'avais eu des soucis car la première fois, je n'avais pas assez d'espace sur le sda2
Je boot bien dessus, tout est OK, mais il fait 1,7Go :
Code : Tout sélectionner
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 28G 0 disk
├─sda1 8:1 0 41.8M 0 part /boot
└─sda2 8:2 0 1.7G 0 part /
mmcblk0 179:0 0 14.9G 0 disk
├─mmcblk0p1 179:1 0 41.8M 0 part
└─mmcblk0p2 179:2 0 14.9G 0 part
En passant par raspi-config, cela ne fonctionne pas (cherche sd), avec rezisef2s idem (normale), et avec cfdisk, je n'ose pas trop de peur d'écraser la sda2.
Merci
PROXMOX VM JEEDOM (NUC merci benj29 ;)) v3.3.24 Stable&Béta
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
- bronche
- Modérateur
- Messages : 973
- Inscription : 07 janv. 2016, 19:29
- Localisation : Du côté de Issy les Moulineaux la semaine et de Péronne le week-end...
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bonjour,
Raspi config ne peut pas redimensionner ton SSD. Il ne peut le faire que pour une SD
Avec fdisk, ça prends une minute et c'est sans risque.
Donc :
Avec les flèches du clavier supprimer la partition qui contient jeedom (sda2) et la recréer en utilisant toute la place. Cela n'a aucune incidence sur les données (même si je conçois que ce soit surprenant)
Ensuite créer une nouvelle partition en se positionnant sur l'espace libre de sda (primary), puis l'écrire (write) et valider par yes (a saisir)
Ensuite il faut rebooter
sudo reboot
puis étendre
Attention, en fonction du SSD, ça peut être très long (5- 10 minutes pour un 32Go)
Et c'est tout...
J'ai fait cette manipulation des dizaines de fois. Jamais perdu mon jeedom...
Phil
Raspi config ne peut pas redimensionner ton SSD. Il ne peut le faire que pour une SD
Avec fdisk, ça prends une minute et c'est sans risque.
Donc :
Code : Tout sélectionner
sudo cfdisk /dev/sda
Ensuite créer une nouvelle partition en se positionnant sur l'espace libre de sda (primary), puis l'écrire (write) et valider par yes (a saisir)
Ensuite il faut rebooter
sudo reboot
puis étendre
Code : Tout sélectionner
sudo resize2fs /dev/sda2
Et c'est tout...
J'ai fait cette manipulation des dizaines de fois. Jamais perdu mon jeedom...
Phil
Helper Officiel Jeedom
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bonjour @bronche, je vais tester, mais effectivement, le fait de casser une partition et de la recréer donne l'impression de tout supprimer
PROXMOX VM JEEDOM (NUC merci benj29 ;)) v3.3.24 Stable&Béta
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
@bronche, je ne comprend un truc, si je supprime sda2, que je recrée un sda2 avec toute la place, je n'ai plus rien pour faire la nouvelle partition ?
J'ai fait ça (j'ai ajouté une partition swap en plus sda4)
Il faut peut être les remontée ? (sda3 et sda4)
J'ai fait ça (j'ai ajouté une partition swap en plus sda4)
Code : Tout sélectionner
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 28G 0 disk
├─sda1 8:1 0 41.8M 0 part /boot
├─sda2 8:2 0 1.7G 0 part /
├─sda3 8:3 0 25.7G 0 part
└─sda4 8:4 0 557.1M 0 part
mmcblk0 179:0 0 14.9G 0 disk
├─mmcblk0p1 179:1 0 41.8M 0 part
└─mmcblk0p2 179:2 0 14.9G 0 part
PROXMOX VM JEEDOM (NUC merci benj29 ;)) v3.3.24 Stable&Béta
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bon, @bronche, merci, j'ai de nouveau jeedom, j'ai eu le problème de permission dennied, comme je n'avais plus le mdp pi, j'ai réinstalllé, et comme je ne suis pas doué... Donc cette fois, je me suis tout noté, ce sera plus simple pour les prochaines fois.
Et puis j'en ai profité pour passer sour strech, nickel... Encore merci
Et puis j'en ai profité pour passer sour strech, nickel... Encore merci
PROXMOX VM JEEDOM (NUC merci benj29 ;)) v3.3.24 Stable&Béta
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
- bronche
- Modérateur
- Messages : 973
- Inscription : 07 janv. 2016, 19:29
- Localisation : Du côté de Issy les Moulineaux la semaine et de Péronne le week-end...
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Ok
ça fonctionne, c'est le plus important.
Phil
ça fonctionne, c'est le plus important.
Phil
Helper Officiel Jeedom
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
bon j'ai enfin pris le temps de reformater mon SSD.
Donc si je suis a la lettre la page 1...... et bien ce ne fonctionne pas.
J'ai formaté mon SSD, je mis a jour avec win32, j'ai créé le fichier ssh
Mon pi n'est pas détecté sur mon reseau local.
Par contre si je remet ma carte SD dedans, le pi apparait bien dans mon gestionnaire freebox.
mais du coup impossible de réinstaller jeedom...
erreur install mysql impossible
j'ai egalement fais un sudo passwd root
il me repond sucessfully...
pourtant impossible de booter en root.
je boot en pi
Auuuu secours...... lol
Donc si je suis a la lettre la page 1...... et bien ce ne fonctionne pas.
J'ai formaté mon SSD, je mis a jour avec win32, j'ai créé le fichier ssh
Mon pi n'est pas détecté sur mon reseau local.
Par contre si je remet ma carte SD dedans, le pi apparait bien dans mon gestionnaire freebox.
mais du coup impossible de réinstaller jeedom...
erreur install mysql impossible
j'ai egalement fais un sudo passwd root
il me repond sucessfully...
pourtant impossible de booter en root.
je boot en pi
Auuuu secours...... lol
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
j'a i installé jeedom sur un SD
j'ai restauré ma sauvegarde et je ne peut pas faire grand chose
The stream or file "/var/www/html/core/class/../../log/plugin" could not be opened: failed to open stream: Permission denied
j'ai restauré ma sauvegarde et je ne peut pas faire grand chose
The stream or file "/var/www/html/core/class/../../log/plugin" could not be opened: failed to open stream: Permission denied
Jeedom mini, 2 fibaro fgs221, everspring st814, 2 qubino 1 relay, qubino 2 Relay
Jeedom mini, everspring st814, 1 qubino 2 Relay, une prise everspring 142
Jeedom mini, everspring st814, 1 qubino 2 Relay, une prise everspring 142
- bronche
- Modérateur
- Messages : 973
- Inscription : 07 janv. 2016, 19:29
- Localisation : Du côté de Issy les Moulineaux la semaine et de Péronne le week-end...
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
Bonjour
Un petite recherche quand même...
En ssh:
Code : Tout sélectionner
chmod 775 -R /var/www/html
chown www-data:www-data -R /var/www/html
Helper Officiel Jeedom
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Des images non officielles jeedom maintenues et hébergées par mes soins :
https://queen.useed.fr/SB1268/owncloud/ ... mA9xeSgBgx
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
merci à Bronche
Jeedom mini, 2 fibaro fgs221, everspring st814, 2 qubino 1 relay, qubino 2 Relay
Jeedom mini, everspring st814, 1 qubino 2 Relay, une prise everspring 142
Jeedom mini, everspring st814, 1 qubino 2 Relay, une prise everspring 142
Re: [tuto] [Pi3] Jeedom netinstall direct sur SSD
@batna44
Je n'ai jamais réussi à me passer de la sd, j'ai donc mixé ce tuto et celui de framboise (partie fstab pour mettre la sd en read only, ro et forcer le boot du ssd) et avoir tout sur le ssd.
J'ai mis une sd de 4go du fond de tiroir, de toute façon, elle ne sert à rien, il faut juste qu'elle fasse le job du démarrage.
Et aussi, j'ai le ssh en pi, pas en root, mais je pense que c'est normale
Je n'ai jamais réussi à me passer de la sd, j'ai donc mixé ce tuto et celui de framboise (partie fstab pour mettre la sd en read only, ro et forcer le boot du ssd) et avoir tout sur le ssd.
J'ai mis une sd de 4go du fond de tiroir, de toute façon, elle ne sert à rien, il faut juste qu'elle fasse le job du démarrage.
Et aussi, j'ai le ssh en pi, pas en root, mais je pense que c'est normale
PROXMOX VM JEEDOM (NUC merci benj29 ;)) v3.3.24 Stable&Béta
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
RfxCom - JPI - Blue Connect (sonde piscine) - Alarme Risco - Xiaomi Home - Z Wave - BLEA - Enocean
Mes débuts de débutant
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 13 invités