Plugin blea
Re: Plugin blea
il faut que vous éditiez le fichier /etc/hosts
et mettiez :
127.0.0.1 jeedom
vous redémarrer la box et elle pourra résoudre le host jeedom
et mettiez :
127.0.0.1 jeedom
vous redémarrer la box et elle pourra résoudre le host jeedom
Développement script:
- ssh_commande.php
- ip_public.sh
- BackupSamba.sh
- ssh_commande.php
- ip_public.sh
- BackupSamba.sh
-
- Timide
- Messages : 3
- Inscription : 03 oct. 2015, 10:22
Re: Plugin blea
Bonjour , est il prévu une compatibilité avec la Divoom Aurabox (idem dotti ) , pour notifications via l'enceinte ?
Re: Plugin blea
Contenu supprimé à la demande de son auteur
-
- Timide
- Messages : 3
- Inscription : 03 oct. 2015, 10:22
Re: Plugin blea
Merci
Envoyé de mon SM-G925F en utilisant Tapatalk
Envoyé de mon SM-G925F en utilisant Tapatalk
Re: Plugin blea
Désolé mais peux tu détailler un peu plus... je ne suis pas adepte de l'edit des fichiers.Darkeyes a écrit :il faut que vous éditiez le fichier /etc/hosts
et mettiez :
127.0.0.1 jeedom
vous redémarrer la box et elle pourra résoudre le host jeedom
Mise a part reboot jeedom en SSH via putty je sais pas faire grand chose encore
MErci
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: Plugin blea
tu te connectes en ssh,batna44 a écrit :Désolé mais peux tu détailler un peu plus... je ne suis pas adepte de l'edit des fichiers.Darkeyes a écrit :il faut que vous éditiez le fichier /etc/hosts
et mettiez :
127.0.0.1 jeedom
vous redémarrer la box et elle pourra résoudre le host jeedom
Mise a part reboot jeedom en SSH via putty je sais pas faire grand chose encore
MErci
tu fais :
sudo nano /etc/hosts
tu tapes les lignes
ensuite ctrl+x puis o ou y pour enregister
Développement script:
- ssh_commande.php
- ip_public.sh
- BackupSamba.sh
- ssh_commande.php
- ip_public.sh
- BackupSamba.sh
Re: Plugin blea
Merci,
j'ai tout suivi a la lettre j'avais déja une ligne avec 127.0.0.1 mais pas juste jeedom derriere,
j'ai donc rajouté une ligne et sauvegardé.
Redémarré la box, relancé les dependances....
Demon toujours NOK
Log : Connexion SSH KO voir logs
blea_local : [2017-01-02 14:30:28][ERROR] : Exception on scanner (didn't resolve there is an issue with bluetooth) : Failed to execute mgmt cmd 'le on'
blea_dependency :
j'ai tout suivi a la lettre j'avais déja une ligne avec 127.0.0.1 mais pas juste jeedom derriere,
j'ai donc rajouté une ligne et sauvegardé.
Redémarré la box, relancé les dependances....
Demon toujours NOK
Log : Connexion SSH KO voir logs
blea_local : [2017-01-02 14:30:28][ERROR] : Exception on scanner (didn't resolve there is an issue with bluetooth) : Failed to execute mgmt cmd 'le on'
blea_dependency :
Code : Tout sélectionner
Launch install of blea dependancy
Get:1 http://security.debian.org jessie/updates InRelease [63.1 kB]
Ign http://httpredir.debian.org jessie InRelease
Ign http://repo.jeedom.com ./ InRelease
Get:2 http://httpredir.debian.org jessie-updates InRelease [145 kB]
Get:3 http://security.debian.org jessie/updates/main Sources [174 kB]
Hit http://repo.jeedom.com ./ Release.gpg
Hit http://httpredir.debian.org jessie Release.gpg
Hit http://httpredir.debian.org jessie Release
Hit http://repo.jeedom.com ./ Release
Hit https://deb.nodesource.com jessie InRelease
Get:4 http://httpredir.debian.org jessie-updates/main Sources [15.4 kB]
Get:5 http://security.debian.org jessie/updates/main armhf Packages [324 kB]
Get:6 http://httpredir.debian.org jessie-updates/main Translation-en/DiffIndex [2704 B]
Get:7 http://httpredir.debian.org jessie-updates/main armhf Packages/DiffIndex [6916 B]
Hit http://httpredir.debian.org jessie/main Sources
Hit http://repo.jeedom.com ./ Sources
Hit https://deb.nodesource.com jessie/main Sources
Hit http://httpredir.debian.org jessie/main armhf Packages
Hit http://httpredir.debian.org jessie/main Translation-en
Get:8 http://security.debian.org jessie/updates/main Translation-en [178 kB]
Hit http://repo.jeedom.com ./ Packages
Ign http://repo.jeedom.com ./ Translation-en
Hit https://deb.nodesource.com jessie/main armhf Packages
Get:9 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:10 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:11 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:12 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:13 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Fetched 909 kB in 1min 20s (11.3 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 153 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
The following extra packages will be installed:
libelfg0 libglib2.0-0 libglib2.0-bin
Suggested packages:
libglib2.0-doc
The following NEW packages will be installed:
libelfg0 libglib2.0-bin libglib2.0-dev
The following packages will be upgraded:
libglib2.0-0
1 upgraded, 3 newly installed, 0 to remove and 152 not upgraded.
Need to get 6206 kB of archives.
After this operation, 9117 kB of additional disk space will be used.
Get:1 http://httpredir.debian.org/debian/ jessie/main libelfg0 armhf 0.8.13-5 [47.4 kB]
Get:2 http://httpredir.debian.org/debian/ jessie/main libglib2.0-0 armhf 2.42.1-1+b1 [2270 kB]
Get:3 http://httpredir.debian.org/debian/ jessie/main libglib2.0-bin armhf 2.42.1-1+b1 [1334 kB]
Get:4 http://httpredir.debian.org/debian/ jessie/main libglib2.0-dev armhf 2.42.1-1+b1 [2555 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 6206 kB in 19s (318 kB/s)
Selecting previously unselected package libelfg0:armhf.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 49923 files and directories currently installed.)
Preparing to unpack .../libelfg0_0.8.13-5_armhf.deb ...
Unpacking libelfg0:armhf (0.8.13-5) ...
Preparing to unpack .../libglib2.0-0_2.42.1-1+b1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.42.1-1+b1) over (2.42.1-1) ...
Selecting previously unselected package libglib2.0-bin.
Preparing to unpack .../libglib2.0-bin_2.42.1-1+b1_armhf.deb ...
Unpacking libglib2.0-bin (2.42.1-1+b1) ...
Selecting previously unselected package libglib2.0-dev.
Preparing to unpack .../libglib2.0-dev_2.42.1-1+b1_armhf.deb ...
Unpacking libglib2.0-dev (2.42.1-1+b1) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libelfg0:armhf (0.8.13-5) ...
Setting up libglib2.0-0:armhf (2.42.1-1+b1) ...
Setting up libglib2.0-bin (2.42.1-1+b1) ...
Setting up libglib2.0-dev (2.42.1-1+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u3) ...
Requirement already satisfied (use --upgrade to upgrade): pyudev in /usr/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): pyserial in /usr/lib/python2.7/dist-packages
Cleaning up...
Cloning into 'bluepy'...
running build
running build_py
creating build
creating build/lib.linux-armv7l-2.7
creating build/lib.linux-armv7l-2.7/bluepy
copying bluepy/__init__.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/btle.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/get_services.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/sensortag.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/blescan.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/uuids.json -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluez-src.tgz -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluepy-helper.c -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/Makefile -> build/lib.linux-armv7l-2.7/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy
running build
running build_py
copying bluepy/bluepy-helper -> build/lib.linux-armv7l-2.7/bluepy
running install_lib
creating /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluez-src.tgz -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/uuids.json -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/__init__.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/Makefile -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/btle.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/get_services.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/sensortag.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/blescan.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper.c -> /usr/local/lib/python2.7/dist-packages/bluepy
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/__init__.py to __init__.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/btle.py to btle.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/get_services.py to get_services.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/sensortag.py to sensortag.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/blescan.py to blescan.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing top-level names to bluepy.egg-info/top_level.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
Copying bluepy.egg-info to /usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Enabled bluetooth
Everything is successfully installed!
Launch install of blea dependancy
Hit http://security.debian.org jessie/updates InRelease
Ign http://httpredir.debian.org jessie InRelease
Hit http://httpredir.debian.org jessie-updates InRelease
Hit http://httpredir.debian.org jessie Release.gpg
Hit http://security.debian.org jessie/updates/main Sources
Ign http://repo.jeedom.com ./ InRelease
Hit http://security.debian.org jessie/updates/main armhf Packages
Hit http://httpredir.debian.org jessie Release
Hit http://security.debian.org jessie/updates/main Translation-en
Hit https://deb.nodesource.com jessie InRelease
Hit http://repo.jeedom.com ./ Release.gpg
Hit http://httpredir.debian.org jessie-updates/main Sources
Hit https://deb.nodesource.com jessie/main Sources
Get:1 http://httpredir.debian.org jessie-updates/main armhf Packages/DiffIndex [6916 B]
Hit http://repo.jeedom.com ./ Release
Hit https://deb.nodesource.com jessie/main armhf Packages
Get:2 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:3 https://deb.nodesource.com jessie/main Translation-en [162 B]
Hit http://repo.jeedom.com ./ Sources
Get:4 http://httpredir.debian.org jessie-updates/main Translation-en/DiffIndex [2704 B]
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Hit http://httpredir.debian.org jessie/main Sources
Get:6 https://deb.nodesource.com jessie/main Translation-en [162 B]
Hit http://httpredir.debian.org jessie/main armhf Packages
Hit http://repo.jeedom.com ./ Packages
Hit http://httpredir.debian.org jessie/main Translation-en
Get:7 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Ign http://repo.jeedom.com ./ Translation-en
Fetched 9620 B in 1min 6s (143 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 152 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
libglib2.0-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 152 not upgraded.
Requirement already satisfied (use --upgrade to upgrade): pyudev in /usr/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): pyserial in /usr/lib/python2.7/dist-packages
Cleaning up...
fatal: destination path 'bluepy' already exists and is not an empty directory.
running build
running build_py
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy
running build
running build_py
copying bluepy/bluepy-helper -> build/lib.linux-armv7l-2.7/bluepy
running install_lib
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper -> /usr/local/lib/python2.7/dist-packages/bluepy
running install_egg_info
running egg_info
writing bluepy.egg-info/PKG-INFO
writing top-level names to bluepy.egg-info/top_level.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Error bluetooth: Already enabled
Everything is successfully installed!
Launch install of blea dependancy
Hit http://security.debian.org jessie/updates InRelease
Ign http://httpredir.debian.org jessie InRelease
Hit http://httpredir.debian.org jessie-updates InRelease
Hit http://security.debian.org jessie/updates/main Sources
Hit http://httpredir.debian.org jessie Release.gpg
Hit http://security.debian.org jessie/updates/main armhf Packages
Hit http://security.debian.org jessie/updates/main Translation-en
Ign http://repo.jeedom.com ./ InRelease
Hit http://httpredir.debian.org jessie Release
Hit http://repo.jeedom.com ./ Release.gpg
Hit https://deb.nodesource.com jessie InRelease
Hit http://repo.jeedom.com ./ Release
Hit http://httpredir.debian.org jessie-updates/main Sources
Get:1 http://httpredir.debian.org jessie-updates/main armhf Packages/DiffIndex [6916 B]
Get:2 http://httpredir.debian.org jessie-updates/main Translation-en/DiffIndex [2704 B]
Hit http://httpredir.debian.org jessie/main Sources
Hit http://httpredir.debian.org jessie/main armhf Packages
Hit https://deb.nodesource.com jessie/main Sources
Hit http://repo.jeedom.com ./ Sources
Hit https://deb.nodesource.com jessie/main armhf Packages
Hit http://httpredir.debian.org jessie/main Translation-en
Hit http://repo.jeedom.com ./ Packages
Get:3 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:4 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign http://repo.jeedom.com ./ Translation-en
Get:6 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:7 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Fetched 9620 B in 2min 6s (75 B/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
python-dev is already the newest version.
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 152 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
libglib2.0-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 152 not upgraded.
Requirement already satisfied (use --upgrade to upgrade): pyudev in /usr/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): pyserial in /usr/lib/python2.7/dist-packages
Cleaning up...
Cloning into 'bluepy'...
running build
running build_py
creating build
creating build/lib.linux-armv7l-2.7
creating build/lib.linux-armv7l-2.7/bluepy
copying bluepy/__init__.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/btle.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/get_services.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/sensortag.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/blescan.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/uuids.json -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluez-src.tgz -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluepy-helper.c -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/Makefile -> build/lib.linux-armv7l-2.7/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy
running build
running build_py
copying bluepy/bluepy-helper -> build/lib.linux-armv7l-2.7/bluepy
running install_lib
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluez-src.tgz -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/uuids.json -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/__init__.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/Makefile -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/btle.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/get_services.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/sensortag.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/blescan.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper.c -> /usr/local/lib/python2.7/dist-packages/bluepy
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/__init__.py to __init__.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/btle.py to btle.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/get_services.py to get_services.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/sensortag.py to sensortag.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/blescan.py to blescan.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing top-level names to bluepy.egg-info/top_level.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Everything is successfully installed!
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: Plugin blea
D'accord, pas de pb sarakha63...
la mienne n'est surement pas compatible vu que je n'avais que ca sous la main
Merci
la mienne n'est surement pas compatible vu que je n'avais que ca sous la main
Merci
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: Plugin blea
Hello,
Sera t il possible de faire sonner les nuts ou wistiki ?
Merci
Sera t il possible de faire sonner les nuts ou wistiki ?
Merci
RPI3 - AEON LABS Z-Wave (GEN5) - Oeil fibaro - Synology Nas - Webcam ip - Minix Neo z64 - Broadlink RM PRO - Xiaomi Home - Yeelight - Nut mini
Life is sharing , Sharing is life !
Life is sharing , Sharing is life !
Re: Plugin blea
comment etre sure d'avoir une clef BLE ?
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: Plugin blea
On peux t'aider ?sarakha63 a écrit :Je regarderais, je fais sonner le ticatag par exemple. Pour les autres ca depend de la methode utilisé et j'ai pas regardé les miens encore (nut) wistiki je n'ai pas
RPI3 - AEON LABS Z-Wave (GEN5) - Oeil fibaro - Synology Nas - Webcam ip - Minix Neo z64 - Broadlink RM PRO - Xiaomi Home - Yeelight - Nut mini
Life is sharing , Sharing is life !
Life is sharing , Sharing is life !
Re: Plugin blea
Ok ca roule je scrute le post alors.
encore merci au duo magic sararok
encore merci au duo magic sararok
RPI3 - AEON LABS Z-Wave (GEN5) - Oeil fibaro - Synology Nas - Webcam ip - Minix Neo z64 - Broadlink RM PRO - Xiaomi Home - Yeelight - Nut mini
Life is sharing , Sharing is life !
Life is sharing , Sharing is life !
Re: Plugin blea
La mienne n'est pas 4, mais au moins je ne vais pas me planter a commander une nouvellesarakha63 a écrit :bluetooth 4 c'est ble.
Le plus simple etant de retrouver ta reference sur le net et voir les caractéristiques
Merci bcp
Raspberry Pi3/Razberry+Rfxcom/3 Fibaro Sensor/10 Détecteurs Zipato 3en1/5 Fibaro Smoke Sensor/Karotz/2 Wallplug+1 Smart Switch+1 Prise Foxx+1 répéteur Foxx/1 Quibino ZMNHJD1 Fil Pilote/6 Volets SOMFY RTS/Camera Ext FOSCAM/3 Xiaoyi/Orvibo
Re: Plugin blea
Salut
Avez vous une estimation de la portée d'une antenne ? en distance mètre ou surface ?
Je sais que ca va dépendre de l'environnement mais c'est pour avoir une idée du nombre d'antenne pour assurer la couverture de chez moi
Merci
Avez vous une estimation de la portée d'une antenne ? en distance mètre ou surface ?
Je sais que ca va dépendre de l'environnement mais c'est pour avoir une idée du nombre d'antenne pour assurer la couverture de chez moi
Merci
- mathieu.vandamme
- Timide
- Messages : 281
- Inscription : 07 nov. 2016, 22:08
- Localisation : Lille
Re: Plugin blea
Cher Monsieur Sarakha merci pour ce beau plugin arrivé tel le messi (pas le joueur de foot...)
J'ai vu que les thermo peanuts et les peanuts de la mother de chez Sense parlottent en bluetooth avec un pont (un smartphone, une tablette) ou avec la Mother . Tu crois qu'il serait possible de les inclure dans Jeedom directement et ainsi se dispenser de la mother ou de la connections avec le smartphone ? Parce que mine de rien ils sont bien pratiques et choupinets ces petites babioles !
Envoyé de mon iPad en utilisant Tapatalk
J'ai vu que les thermo peanuts et les peanuts de la mother de chez Sense parlottent en bluetooth avec un pont (un smartphone, une tablette) ou avec la Mother . Tu crois qu'il serait possible de les inclure dans Jeedom directement et ainsi se dispenser de la mother ou de la connections avec le smartphone ? Parce que mine de rien ils sont bien pratiques et choupinets ces petites babioles !
Envoyé de mon iPad en utilisant Tapatalk
Je ne suis pas asocial, Je ne suis juste pas orienté utilisateur
Re: Plugin blea
Moi j'ai des clefs bt csr4 à 3€ sur Amazon mais bon. Elles viennent de hobg Kong elle marche bien et la portée est bonne.
J'en ai recommandé.
Pour la sdb je pensais me faire une squeezebox, un petit Jarvis et une antenne bt pour la muscade
J'en ai recommandé.
Pour la sdb je pensais me faire une squeezebox, un petit Jarvis et une antenne bt pour la muscade
-
- Actif
- Messages : 1926
- Inscription : 05 juil. 2014, 11:21
Re: Plugin blea
Bon, j tolere le duo,sarakha63 a écrit : ...
tu viens de me donner une idée de slogan
SarakhaRok ca rock's
mais a l'origine c'est lunarok qui rock's et sarakha qui déboîte !!
Signe : Le spéléologue !
Envoyer avec mon pouce ...
RPI3 + Dongle Aeon
Jeedom sur : Raspberry Pi + Raspberry compute
Mysensors , z-wave, xiaomi ...
https://www.youtube.com/watch?v=-bjbUg9d64g
https://www.youtube.com/watch?v=GPj1ozB ... _b-Toq47NQ
Jeedom sur : Raspberry Pi + Raspberry compute
Mysensors , z-wave, xiaomi ...
https://www.youtube.com/watch?v=-bjbUg9d64g
https://www.youtube.com/watch?v=GPj1ozB ... _b-Toq47NQ
-
- Timide
- Messages : 24
- Inscription : 13 déc. 2014, 09:49
Re: Plugin blea
Bonsoir à tous,
J'ai besoin de votre aide. Je viens d'installer une clé ASUS Bluetooth 4.00 afin d'utiliser le plugin BLEA. Pas de souci apparemment d'installation du plugin car voici le log, les dépendances sont OK :
Launch install of blea dependancy
Hit http://archive.raspberrypi.org jessie InRelease
Get:1 http://mirrordirector.raspbian.org jessie InRelease [14.9 kB]
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Get:2 http://mirrordirector.raspbian.org jessie/main armhf Packages [8981 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en
Get:3 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [70.3 kB]
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Fetched 9066 kB in 55s (165 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
python-dev is already the newest version.
python-pip is already the newest version.
The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal
libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal rlwrap
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 159 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
libglib2.0-dev is already the newest version.
The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal
libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal rlwrap
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 159 not upgraded.
Requirement already satisfied (use --upgrade to upgrade): pyudev in /usr/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): pyserial in /usr/lib/python2.7/dist-packages
Cleaning up...
Cloning into 'bluepy'...
running build
running build_py
creating build
creating build/lib.linux-armv7l-2.7
creating build/lib.linux-armv7l-2.7/bluepy
copying bluepy/sensortag.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/get_services.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/btle.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/blescan.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/__init__.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/uuids.json -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluez-src.tgz -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluepy-helper.c -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/Makefile -> build/lib.linux-armv7l-2.7/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy
running build
running build_py
copying bluepy/bluepy-helper -> build/lib.linux-armv7l-2.7/bluepy
running install_lib
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/Makefile -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper.c -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluez-src.tgz -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/uuids.json -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/__init__.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/blescan.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/btle.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/get_services.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/sensortag.py -> /usr/local/lib/python2.7/dist-packages/bluepy
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/__init__.py to __init__.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/blescan.py to blescan.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/btle.py to btle.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/get_services.py to get_services.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/sensortag.py to sensortag.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing top-level names to bluepy.egg-info/top_level.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Everything is successfully installed!
Je suis sur sous Jessie avec la dernière version de Jeedom avec un RPI 2. Le plugin de voit pas la clé dans le port clé bluetooth.....(Aucun port à sélectionner)
Toutes suggestions sont les bienvenues .
Merci encore pour votre aide et Bonne Année 2017 !!!
J'ai besoin de votre aide. Je viens d'installer une clé ASUS Bluetooth 4.00 afin d'utiliser le plugin BLEA. Pas de souci apparemment d'installation du plugin car voici le log, les dépendances sont OK :
Launch install of blea dependancy
Hit http://archive.raspberrypi.org jessie InRelease
Get:1 http://mirrordirector.raspbian.org jessie InRelease [14.9 kB]
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Get:2 http://mirrordirector.raspbian.org jessie/main armhf Packages [8981 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en
Get:3 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [70.3 kB]
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Fetched 9066 kB in 55s (165 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
python-dev is already the newest version.
python-pip is already the newest version.
The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal
libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal rlwrap
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 159 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
libglib2.0-dev is already the newest version.
The following packages were automatically installed and are no longer required:
libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal
libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal rlwrap
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 159 not upgraded.
Requirement already satisfied (use --upgrade to upgrade): pyudev in /usr/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): pyserial in /usr/lib/python2.7/dist-packages
Cleaning up...
Cloning into 'bluepy'...
running build
running build_py
creating build
creating build/lib.linux-armv7l-2.7
creating build/lib.linux-armv7l-2.7/bluepy
copying bluepy/sensortag.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/get_services.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/btle.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/blescan.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/__init__.py -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/uuids.json -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluez-src.tgz -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/bluepy-helper.c -> build/lib.linux-armv7l-2.7/bluepy
copying bluepy/Makefile -> build/lib.linux-armv7l-2.7/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy
running build
running build_py
copying bluepy/bluepy-helper -> build/lib.linux-armv7l-2.7/bluepy
running install_lib
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/Makefile -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluepy-helper.c -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/bluez-src.tgz -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/uuids.json -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/__init__.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/blescan.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/btle.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/get_services.py -> /usr/local/lib/python2.7/dist-packages/bluepy
copying build/lib.linux-armv7l-2.7/bluepy/sensortag.py -> /usr/local/lib/python2.7/dist-packages/bluepy
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/__init__.py to __init__.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/blescan.py to blescan.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/btle.py to btle.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/get_services.py to get_services.pyc
byte-compiling /usr/local/lib/python2.7/dist-packages/bluepy/sensortag.py to sensortag.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing top-level names to bluepy.egg-info/top_level.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python2.7/dist-packages/bluepy-1.0.5.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Everything is successfully installed!
Je suis sur sous Jessie avec la dernière version de Jeedom avec un RPI 2. Le plugin de voit pas la clé dans le port clé bluetooth.....(Aucun port à sélectionner)
Toutes suggestions sont les bienvenues .
Merci encore pour votre aide et Bonne Année 2017 !!!
Re: Plugin blea
Mercisarakha63 a écrit :Alors pour la portée faut compter 10 m environ. Des fois plus des fois moins selon le devices qui parlent.
Tapatalk
Envoyé de mon Honor8
Re: Plugin blea
J'utilise le plugin avec une bougie Playbulb Candle, la commande "bougie" fonctionne mais uniquement 3 secondes.Il faut de nouveau appuyer pour n'avoir que 3 secondes.
Une idée ?
Merci
Une idée ?
Merci
Jeedom 3.3.x / Odroid N2 [Alcatel OneTouch X220L + Milight + Aeotec Z-Stick S5 + Bluetooth + RFXCom]
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 9 invités