impossible d'installer les dépendance HELP
Publié : 22 sept. 2019, 21:38
Bonjour,
Depuis la dernière mise à jour de blea, il m'est impossible d'utiliser le plugin.
j'ai les statut et la configuration en statut NOK et lorsque je veux démarrer cela me relance l'installation des dépendances.
J'ai supprimé le plugin puis réinstallé mais le problème persiste.
je met le log si quelqu'un a le temps de jeter un coup d'oeil :
merci à vous
Depuis la dernière mise à jour de blea, il m'est impossible d'utiliser le plugin.
j'ai les statut et la configuration en statut NOK et lorsque je veux démarrer cela me relance l'installation des dépendances.
J'ai supprimé le plugin puis réinstallé mais le problème persiste.
je met le log si quelqu'un a le temps de jeter un coup d'oeil :
merci à vous
Code : Tout sélectionner
********************************************************
* Installation des dépendances *
********************************************************
Get:1 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
Hit:3 https://deb.nodesource.com/node_12.x stretch InRelease
Hit:4 https://raspbian.snips.ai/stretch stable InRelease
Get:5 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11.7 MB]
Fetched 11.7 MB in 14s (835 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version (12.3).
libffi-dev is already the newest version (3.2.1-6).
libtiff5 is already the newest version (4.0.8-2+deb9u4).
libtiff5 set to manually installed.
python3-dev is already the newest version (3.5.3-1).
python3-requests is already the newest version (2.12.4-1).
python3-requests set to manually installed.
python3-setuptools is already the newest version (33.1.1-1).
rfkill is already the newest version (0.5-1).
rfkill set to manually installed.
bluetooth is already the newest version (5.43-2+rpt2+deb9u2).
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libatlas-base-dev : Depends: libatlas3-base (= 3.10.3-1+rpi1) but 3.10.3-1-snips is to be installed
E: Unable to correct problems, you have held broken packages.
Reading package lists...
Building dependency tree...
Reading state information...
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 173 not upgraded.
Need to get 0 B/142 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 114048 files and directories currently installed.)
Preparing to unpack .../python3-pip_9.0.1-2+rpt2_all.deb ...
Unpacking python3-pip (9.0.1-2+rpt2) over (9.0.1-2+rpt2) ...
Setting up python3-pip (9.0.1-2+rpt2) ...
Processing triggers for man-db (2.7.6.1-2) ...
Requirement already up-to-date: setuptools in /usr/local/lib/python3.5/dist-packages
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version (1:2.11.0-3+deb9u4).
libglib2.0-dev is already the newest version (2.50.3-2+deb9u1).
0 upgraded, 0 newly installed, 0 to remove and 173 not upgraded.
Requirement already satisfied: pyudev in /usr/local/lib/python3.5/dist-packages
Requirement already satisfied: six in /usr/lib/python3/dist-packages (from pyudev)
Requirement already satisfied: pyserial in /usr/local/lib/python3.5/dist-packages
Requirement already satisfied: requests in /usr/lib/python3/dist-packages
Collecting pybluez
Using cached https://files.pythonhosted.org/packages/c1/98/3149481d508bee174335be6725880f00d297afebe75c15e917af8f6fe169/PyBluez-0.22.zip
Building wheels for collected packages: pybluez
Running setup.py bdist_wheel for pybluez: started
Running setup.py bdist_wheel for pybluez: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-txbr_872/pybluez/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('
', '
');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpsyag3xytpip-wheel- --python-tag cp35:
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-armv7l-3.5
creating build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/ble.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/btcommon.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/widcomm.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/osx.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/bluez.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/msbt.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/__init__.py -> build/lib.linux-armv7l-3.5/bluetooth
running build_ext
building 'bluetooth._bluetooth' extension
creating build/temp.linux-armv7l-3.5
creating build/temp.linux-armv7l-3.5/bluez
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I./port3 -I/usr/include/python3.5m -c bluez/btmodule.c -o build/temp.linux-armv7l-3.5/bluez/btmodule.o
In file included from bluez/btmodule.c:20:0:
bluez/btmodule.h:5:33: fatal error: bluetooth/bluetooth.h: No such file or directory
#include <bluetooth/bluetooth.h>
^
compilation terminated.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
----------------------------------------
Failed building wheel for pybluez
Running setup.py clean for pybluez
Failed to build pybluez
Installing collected packages: pybluez
Running setup.py install for pybluez: started
Running setup.py install for pybluez: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-txbr_872/pybluez/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('
', '
');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-a_44_inz-record/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build/lib.linux-armv7l-3.5
creating build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/ble.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/btcommon.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/widcomm.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/osx.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/bluez.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/msbt.py -> build/lib.linux-armv7l-3.5/bluetooth
copying bluetooth/__init__.py -> build/lib.linux-armv7l-3.5/bluetooth
running build_ext
building 'bluetooth._bluetooth' extension
creating build/temp.linux-armv7l-3.5
creating build/temp.linux-armv7l-3.5/bluez
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fdebug-prefix-map=/build/python3.5-6waWnr/python3.5-3.5.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I./port3 -I/usr/include/python3.5m -c bluez/btmodule.c -o build/temp.linux-armv7l-3.5/bluez/btmodule.o
In file included from bluez/btmodule.c:20:0:
bluez/btmodule.h:5:33: fatal error: bluetooth/bluetooth.h: No such file or directory
#include <bluetooth/bluetooth.h>
^
compilation terminated.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-txbr_872/pybluez/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('
', '
');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-a_44_inz-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-txbr_872/pybluez/
Requirement already satisfied: pillow in /usr/local/lib/python3.5/dist-packages
Requirement already satisfied: numpy in /usr/local/lib/python3.5/dist-packages
Cloning into 'bluepy'...
running build
running build_py
creating build
creating build/lib
creating build/lib/bluepy
copying bluepy/scanner.py -> build/lib/bluepy
copying bluepy/blescan.py -> build/lib/bluepy
copying bluepy/thingy52.py -> build/lib/bluepy
copying bluepy/btle.py -> build/lib/bluepy
copying bluepy/scan_fuzz.py -> build/lib/bluepy
copying bluepy/__init__.py -> build/lib/bluepy
copying bluepy/get_services.py -> build/lib/bluepy
copying bluepy/sensortag.py -> build/lib/bluepy
copying bluepy/uuids.json -> build/lib/bluepy
copying bluepy/bluez-src.tgz -> build/lib/bluepy
copying bluepy/bluepy-helper.c -> build/lib/bluepy
copying bluepy/Makefile -> build/lib/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy -j1
running build
running build_py
copying bluepy/bluepy-helper -> build/lib/bluepy
running install_lib
copying build/lib/bluepy/scanner.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/bluepy-helper.c -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/bluez-src.tgz -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/blescan.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/thingy52.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/Makefile -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/btle.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/scan_fuzz.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/__init__.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/get_services.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/sensortag.py -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/bluepy-helper -> /usr/local/lib/python3.5/dist-packages/bluepy
copying build/lib/bluepy/uuids.json -> /usr/local/lib/python3.5/dist-packages/bluepy
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/scanner.py to scanner.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/blescan.py to blescan.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/thingy52.py to thingy52.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/btle.py to btle.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/scan_fuzz.py to scan_fuzz.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/__init__.py to __init__.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/get_services.py to get_services.cpython-35.pyc
byte-compiling /usr/local/lib/python3.5/dist-packages/bluepy/sensortag.py to sensortag.cpython-35.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing entry points to bluepy.egg-info/entry_points.txt
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing top-level names to bluepy.egg-info/top_level.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python3.5/dist-packages/bluepy-1.1.4-py3.5.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python3.5/dist-packages/bluepy-1.1.4-py3.5.egg-info
running install_scripts
Installing sensortag script to /usr/local/bin
Installing blescan script to /usr/local/bin
Installing thingy52 script to /usr/local/bin
Requirement already satisfied: cryptography in /usr/lib/python3/dist-packages
Requirement already satisfied: pycrypto in /usr/lib/python3/dist-packages
********************************************************
* Installation terminée *
********************************************************