Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

[Sujet officiel] SqueezeBox Control

McClane
Timide
Messages : 27
Inscription : 06 juin 2015, 00:50

Re: [Sujet officiel] SqueezeBox Control

Message par McClane » 19 févr. 2016, 23:03

Nibb31 a écrit :Les dépendances sont obligatoires pour le TTS.
Ok je vais m'y attaquer. Merci.
Une réponse de sarakha plus haut ds le fil laisse entendre que les dépendances pico ne sont pas nécessaires si on utilise voxygen...
Quoiqu'il en soit, je vais lever le doute..

Envoyé de mon SM-N910F en utilisant Tapatalk

McClane
Timide
Messages : 27
Inscription : 06 juin 2015, 00:50

Re: [Sujet officiel] SqueezeBox Control

Message par McClane » 20 févr. 2016, 00:27

McClane a écrit :
Nibb31 a écrit :Les dépendances sont obligatoires pour le TTS.
Ok je vais m'y attaquer. Merci.
Une réponse de sarakha plus haut ds le fil laisse entendre que les dépendances pico ne sont pas nécessaires si on utilise voxygen...
Quoiqu'il en soit, je vais lever le doute..

Envoyé de mon SM-N910F en utilisant Tapatalk
bon c'était plus bête que prévu, c'est la voix de Damien qui n'est plus dispo pour voxygen à priori.
J'ai tout de même installé les dépendances pico aussi.



Envoyé de mon SM-N910F en utilisant Tapatalk

Blum95
Timide
Messages : 326
Inscription : 10 oct. 2014, 18:16

Re: [Sujet officiel] SqueezeBox Control

Message par Blum95 » 20 févr. 2016, 08:41

je ne trouve pas comment installer les dépendances :/
Faut il les installer sur mon Rpi Jeedom ou mon Rpi squeezebox?
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP

Avatar de l’utilisateur
Nibb31
Actif
Messages : 2155
Inscription : 17 févr. 2015, 15:29

Re: [Sujet officiel] SqueezeBox Control

Message par Nibb31 » 21 févr. 2016, 20:06

Blum95 a écrit :je ne trouve pas comment installer les dépendances :/
Faut il les installer sur mon Rpi Jeedom ou mon Rpi squeezebox?
Tu les installes dans Jeedom en cliquant sur Plugins > Gestion des Plugins > Squeezebox > Dependances > Installation > Relancer.

J'ai un souci avec un player Squeezelite qui n'apparait pas quand je fais Scanner. Impossible de le rajouter dans Jeedom, et pourtant il est bien visible sous LMS. Quelqu'un a une idée ?
Jeedom: VM ProxMox sur serveur i7-2760QM, RAM 8Go
Zwave + RFXCom433E + Hue

Avatar de l’utilisateur
Nibb31
Actif
Messages : 2155
Inscription : 17 févr. 2015, 15:29

Re: [Sujet officiel] SqueezeBox Control

Message par Nibb31 » 22 févr. 2016, 23:47

Nibb31 a écrit : J'ai un souci avec un player Squeezelite qui n'apparait pas quand je fais Scanner. Impossible de le rajouter dans Jeedom, et pourtant il est bien allumé et visible sous LMS. Quelqu'un a une idée ?
Up ?
Jeedom: VM ProxMox sur serveur i7-2760QM, RAM 8Go
Zwave + RFXCom433E + Hue

Blum95
Timide
Messages : 326
Inscription : 10 oct. 2014, 18:16

Re: [Sujet officiel] SqueezeBox Control

Message par Blum95 » 23 févr. 2016, 16:41

j'ai beau relancer l'installation des dépendances ça reste toujours en NOK

Code : Tout sélectionner

########### Installation en cours ##########
Reading package lists...
Building dependency tree...
Reading state information...
software-properties-common is already the newest version.
The following package was automatically installed and is no longer required:
libllvm3.5
Use 'apt-get autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 167, in <module>
sp = SoftwareProperties(options=options)
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 105, in __init__
self.reload_sourceslist()
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 595, in reload_sourceslist
self.distro.get_sources(self.sourceslist)
File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 89, in get_sources
(self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/jessie
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 167, in <module>
sp = SoftwareProperties(options=options)
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 105, in __init__
self.reload_sourceslist()
File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 595, in reload_sourceslist
self.distro.get_sources(self.sourceslist)
File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 89, in get_sources
(self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/jessie
Hit http://archive.raspberrypi.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Hit https://deb.nodesource.com jessie InRelease
Hit https://deb.nodesource.com jessie/main Sources
Hit https://deb.nodesource.com jessie/main armhf Packages
Get:1 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:2 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:3 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:4 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
libav-tools is already the newest version.
The following package was automatically installed and is no longer required:
libllvm3.5
Use 'apt-get autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
Package libttspico-utils is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'libttspico-utils' has no installation candidate
########### Fin ##########
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP

toufou
Timide
Messages : 140
Inscription : 25 juin 2014, 23:28

Re: [Sujet officiel] SqueezeBox Control

Message par toufou » 23 févr. 2016, 16:56

Salut,

A priori je rencontre le meme probleme que blum95 pour l'installation des dépendances.
Je suis sur RPI2 avec jeedom 2.0.1 et jessie comme distrib.
Il me semble me souvenir de vieux posts ou l'install ne fonctionne pas forcement sous jessie? C'est toujours le cas?

Mon log:

Code : Tout sélectionner

########### Installation en cours ##########
Reading package lists...
Building dependency tree...
Reading state information...
software-properties-common is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 91 not upgraded.
Traceback (most recent call last):
  File "/usr/bin/add-apt-repository", line 167, in 
    sp = SoftwareProperties(options=options)
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 105, in __init__
    self.reload_sourceslist()
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 595, in reload_sourceslist
    self.distro.get_sources(self.sourceslist)    
  File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 89, in get_sources
    (self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/jessie
Traceback (most recent call last):
  File "/usr/bin/add-apt-repository", line 167, in 
    sp = SoftwareProperties(options=options)
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 105, in __init__
    self.reload_sourceslist()
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 595, in reload_sourceslist
    self.distro.get_sources(self.sourceslist)    
  File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 89, in get_sources
    (self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/jessie
Get:1 http://mirrordirector.raspbian.org jessie InRelease [15.0 kB]
Hit http://archive.raspberrypi.org jessie InRelease
Hit http://apt.adafruit.com jessie InRelease
Get:2 http://mirrordirector.raspbian.org jessie/main armhf Packages [8963 kB]
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Hit http://apt.adafruit.com jessie/main armhf Packages
Hit https://deb.nodesource.com jessie InRelease
Hit https://deb.nodesource.com jessie/main Sources
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://apt.adafruit.com jessie/main Translation-en
Hit https://deb.nodesource.com jessie/main armhf Packages
Get:3 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:4 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:6 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:7 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Get:8 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [70.3 kB]
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Fetched 9048 kB in 37s (238 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
libav-tools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 91 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
Package libttspico-utils is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'libttspico-utils' has no installation candidate
########### Fin ##########
+TouFou

Avatar de l’utilisateur
Nibb31
Actif
Messages : 2155
Inscription : 17 févr. 2015, 15:29

Re: [Sujet officiel] SqueezeBox Control

Message par Nibb31 » 23 févr. 2016, 20:12

Essayer ça sous SSH:

Code : Tout sélectionner

sudo apt-add-repository multiverse
sudo apt-get install libttspico-utils
sudo apt-remove-repository multiverse
Jeedom: VM ProxMox sur serveur i7-2760QM, RAM 8Go
Zwave + RFXCom433E + Hue

Blum95
Timide
Messages : 326
Inscription : 10 oct. 2014, 18:16

Re: [Sujet officiel] SqueezeBox Control

Message par Blum95 » 23 févr. 2016, 20:18

Code : Tout sélectionner

pi@squeezeplug ~ $ sudo apt-get install libttspico-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libttspico-utils is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'libttspico-utils' has no installation candidate
Pièces jointes
Capture.JPG
Capture.JPG (114.97 Kio) Consulté 1141 fois
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP

Blum95
Timide
Messages : 326
Inscription : 10 oct. 2014, 18:16

Re: [Sujet officiel] SqueezeBox Control

Message par Blum95 » 23 févr. 2016, 20:21

sudo apt-add-repository multiverse me dit "command not found"
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP

Avatar de l’utilisateur
Nibb31
Actif
Messages : 2155
Inscription : 17 févr. 2015, 15:29

Re: [Sujet officiel] SqueezeBox Control

Message par Nibb31 » 23 févr. 2016, 20:35

Alors, essaies ça:

Code : Tout sélectionner

sudo nano /etc/apt/sources.list
Rajouter les lignes suivantes:

Code : Tout sélectionner

deb http://security.debian.org/ wheezy/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
deb http://ftp.fr.debian.org/debian/ wheezy-updates main contrib non-free
Et ensuite:

Code : Tout sélectionner

sudo apt-get update  -y -q
sudo apt-get -y install libav-tools
sudo apt-get install -y libsox-fmt-mp3 sox libttspico-utils
Et essaie de réinstaller les dépendances.
Jeedom: VM ProxMox sur serveur i7-2760QM, RAM 8Go
Zwave + RFXCom433E + Hue

Blum95
Timide
Messages : 326
Inscription : 10 oct. 2014, 18:16

Re: [Sujet officiel] SqueezeBox Control

Message par Blum95 » 23 févr. 2016, 21:22

Toujours en NOK...

Voila ce que donne tes codes:

Code : Tout sélectionner

pi@squeezeplug ~ $ sudo apt-get update  -y -q
Get:1 http://ftp.fr.debian.org wheezy Release.gpg [2,373 B]
Hit http://mirrordirector.raspbian.org wheezy Release.gpg
Get:2 http://security.debian.org wheezy/updates Release.gpg [1,554 B]
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://raspberrypi.collabora.com wheezy Release.gpg
Get:3 http://ftp.fr.debian.org wheezy-updates Release.gpg [1,554 B]
Hit http://mirrordirector.raspbian.org wheezy Release
Hit http://security.debian.org wheezy/updates Release
Hit http://ftp.fr.debian.org wheezy Release
Hit http://raspberrypi.collabora.com wheezy Release
Hit http://archive.raspberrypi.org wheezy Release
Hit http://ftp.fr.debian.org wheezy-updates Release
Hit http://mirrordirector.raspbian.org wheezy/main armhf Packages
Ign http://security.debian.org wheezy/updates Release
Hit http://mirrordirector.raspbian.org wheezy/contrib armhf Packages
Hit http://security.debian.org wheezy/updates/main armhf Packages
Ign http://ftp.fr.debian.org wheezy Release
Hit http://mirrordirector.raspbian.org wheezy/non-free armhf Packages
Hit http://security.debian.org wheezy/updates/contrib armhf Packages
Hit http://mirrordirector.raspbian.org wheezy/rpi armhf Packages
Hit http://security.debian.org wheezy/updates/non-free armhf Packages
Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages
Hit http://security.debian.org wheezy/updates/contrib Translation-en
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://security.debian.org wheezy/updates/main Translation-en
Ign http://ftp.fr.debian.org wheezy-updates Release
Hit http://security.debian.org wheezy/updates/non-free Translation-en
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en_GB
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en
Ign http://security.debian.org wheezy/updates/contrib Translation-en_GB
Ign http://security.debian.org wheezy/updates/main Translation-en_GB
Ign http://security.debian.org wheezy/updates/non-free Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Get:4 http://ftp.fr.debian.org wheezy/main armhf Packages [5,686 kB]
Get:5 http://ftp.fr.debian.org wheezy/contrib armhf Packages [33.1 kB]
Get:6 http://ftp.fr.debian.org wheezy/non-free armhf Packages [55.8 kB]
Get:7 http://ftp.fr.debian.org wheezy/contrib Translation-en [34.8 kB]
Get:8 http://ftp.fr.debian.org wheezy/main Translation-en [3,846 kB]
Get:9 http://ftp.fr.debian.org wheezy/non-free Translation-en [66.1 kB]
Get:10 http://ftp.fr.debian.org wheezy-updates/main armhf Packages [4,766 B]
Get:11 http://ftp.fr.debian.org wheezy-updates/contrib armhf Packages [14 B]
Get:12 http://ftp.fr.debian.org wheezy-updates/non-free armhf Packages [14 B]
Get:13 http://ftp.fr.debian.org wheezy-updates/contrib Translation-en [14 B]
Get:14 http://ftp.fr.debian.org wheezy-updates/main Translation-en [3,814 B]
Get:15 http://ftp.fr.debian.org wheezy-updates/non-free Translation-en [14 B]
Ign http://ftp.fr.debian.org wheezy/contrib Translation-en_GB
Ign http://ftp.fr.debian.org wheezy/main Translation-en_GB
Ign http://ftp.fr.debian.org wheezy/non-free Translation-en_GB
Ign http://ftp.fr.debian.org wheezy-updates/contrib Translation-en_GB
Ign http://ftp.fr.debian.org wheezy-updates/main Translation-en_GB
Ign http://ftp.fr.debian.org wheezy-updates/non-free Translation-en_GB
Fetched 5,493 B in 1min 7s (81 B/s)
Reading package lists...
W: GPG error: http://security.debian.org wheezy/updates Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9D6D8F6BC857C906 NO_PUBKEY 8B48AD6246925553
W: GPG error: http://ftp.fr.debian.org wheezy Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010 NO_PUBKEY 6FB2A1C265FFB764
W: GPG error: http://ftp.fr.debian.org wheezy-updates Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
pi@squeezeplug ~ $ sudo apt-get -y install libav-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libavcodec54 libavdevice53 libavfilter3 libavformat54 libavresample1
  libavutil52 libdc1394-22 libopencore-amrnb0 libopencore-amrwb0
  libopencv-core2.4 libopencv-imgproc2.4 libopus0 libraw1394-11 libswscale2
  libvo-aacenc0 libvo-amrwbenc0 libx264-130
Suggested packages:
  frei0r-plugins opus-tools libraw1394-doc
The following NEW packages will be installed:
  libav-tools libavcodec54 libavdevice53 libavfilter3 libavformat54
  libavresample1 libavutil52 libdc1394-22 libopencore-amrnb0
  libopencore-amrwb0 libopencv-core2.4 libopencv-imgproc2.4 libopus0
  libraw1394-11 libvo-aacenc0 libvo-amrwbenc0 libx264-130
The following packages will be upgraded:
  libswscale2
1 upgraded, 17 newly installed, 0 to remove and 221 not upgraded.
Need to get 11.5 MB of archives.
After this operation, 31.7 MB of additional disk space will be used.
Get:1 http://archive.raspberrypi.org/debian/ wheezy/main libavutil52 armhf 6:9.14-1rpi1rpi1 [131 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libopencore-amrnb0 armhf 0.1.3-2 [94.6 kB]
Get:3 http://archive.raspberrypi.org/debian/ wheezy/main libopus0 armhf 1.1~beta-3rpi2 [159 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libopencore-amrwb0 armhf 0.1.3-2 [48.0 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libvo-aacenc0 armhf 0.1.2-1 [70.7 kB]
Get:6 http://archive.raspberrypi.org/debian/ wheezy/main libx264-130 armhf 2:0.130.2282+git1db4621-2rpi1rpi2 [1,372 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libvo-amrwbenc0 armhf 0.1.2-1 [67.1 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libraw1394-11 armhf 2.0.9-1 [45.0 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libdc1394-22 armhf 2.2.0-2 [116 kB]
Get:10 http://archive.raspberrypi.org/debian/ wheezy/main libavcodec54 armhf 6:9.14-1rpi1rpi1 [3,599 kB]
Get:11 http://archive.raspberrypi.org/debian/ wheezy/main libavformat54 armhf 6:9.14-1rpi1rpi1 [683 kB]
Get:12 http://archive.raspberrypi.org/debian/ wheezy/main libavdevice53 armhf 6:9.14-1rpi1rpi1 [86.6 kB]
Get:13 http://archive.raspberrypi.org/debian/ wheezy/main libavresample1 armhf 6:9.14-1rpi1rpi1 [84.0 kB]
Get:14 http://archive.raspberrypi.org/debian/ wheezy/main libopencv-core2.4 armhf 2.4.1+dfsg-0exp2rpi2 [773 kB]
Get:15 http://archive.raspberrypi.org/debian/ wheezy/main libopencv-imgproc2.4 armhf 2.4.1+dfsg-0exp2rpi2 [670 kB]
Get:16 http://archive.raspberrypi.org/debian/ wheezy/main libswscale2 armhf 6:9.14-1rpi1rpi1 [147 kB]
Get:17 http://archive.raspberrypi.org/debian/ wheezy/main libavfilter3 armhf 6:9.14-1rpi1rpi1 [162 kB]
Get:18 http://archive.raspberrypi.org/debian/ wheezy/main libav-tools armhf 6:9.14-1rpi1rpi1 [3,198 kB]
Fetched 11.5 MB in 13s (840 kB/s)
Selecting previously unselected package libavutil52:armhf.
(Reading database ... 68818 files and directories currently installed.)
Unpacking libavutil52:armhf (from .../libavutil52_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libopencore-amrnb0:armhf.
Unpacking libopencore-amrnb0:armhf (from .../libopencore-amrnb0_0.1.3-2_armhf.deb) ...
Selecting previously unselected package libopencore-amrwb0:armhf.
Unpacking libopencore-amrwb0:armhf (from .../libopencore-amrwb0_0.1.3-2_armhf.deb) ...
Selecting previously unselected package libopus0.
Unpacking libopus0 (from .../libopus0_1.1~beta-3rpi2_armhf.deb) ...
Selecting previously unselected package libvo-aacenc0:armhf.
Unpacking libvo-aacenc0:armhf (from .../libvo-aacenc0_0.1.2-1_armhf.deb) ...
Selecting previously unselected package libvo-amrwbenc0:armhf.
Unpacking libvo-amrwbenc0:armhf (from .../libvo-amrwbenc0_0.1.2-1_armhf.deb) ...
Selecting previously unselected package libx264-130:armhf.
Unpacking libx264-130:armhf (from .../libx264-130_2%3a0.130.2282+git1db4621-2rpi1rpi2_armhf.deb) ...
Selecting previously unselected package libavcodec54:armhf.
Unpacking libavcodec54:armhf (from .../libavcodec54_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libavformat54:armhf.
Unpacking libavformat54:armhf (from .../libavformat54_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libraw1394-11:armhf.
Unpacking libraw1394-11:armhf (from .../libraw1394-11_2.0.9-1_armhf.deb) ...
Selecting previously unselected package libdc1394-22:armhf.
Unpacking libdc1394-22:armhf (from .../libdc1394-22_2.2.0-2_armhf.deb) ...
Selecting previously unselected package libavdevice53:armhf.
Unpacking libavdevice53:armhf (from .../libavdevice53_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libavresample1:armhf.
Unpacking libavresample1:armhf (from .../libavresample1_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libopencv-core2.4.
Unpacking libopencv-core2.4 (from .../libopencv-core2.4_2.4.1+dfsg-0exp2rpi2_armhf.deb) ...
Selecting previously unselected package libopencv-imgproc2.4.
Unpacking libopencv-imgproc2.4 (from .../libopencv-imgproc2.4_2.4.1+dfsg-0exp2rpi2_armhf.deb) ...
Preparing to replace libswscale2:armhf 6:0.8.6-1+rpi1 (using .../libswscale2_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Unpacking replacement libswscale2:armhf ...
Selecting previously unselected package libavfilter3:armhf.
Unpacking libavfilter3:armhf (from .../libavfilter3_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Selecting previously unselected package libav-tools.
Unpacking libav-tools (from .../libav-tools_6%3a9.14-1rpi1rpi1_armhf.deb) ...
Processing triggers for man-db ...
/usr/bin/mandb: can't write to /var/cache/man/2778: No space left on device
Setting up libavutil52:armhf (6:9.14-1rpi1rpi1) ...
Setting up libopencore-amrnb0:armhf (0.1.3-2) ...
Setting up libopencore-amrwb0:armhf (0.1.3-2) ...
Setting up libopus0 (1.1~beta-3rpi2) ...
Setting up libvo-aacenc0:armhf (0.1.2-1) ...
Setting up libvo-amrwbenc0:armhf (0.1.2-1) ...
Setting up libx264-130:armhf (2:0.130.2282+git1db4621-2rpi1rpi2) ...
Setting up libavcodec54:armhf (6:9.14-1rpi1rpi1) ...
Setting up libavformat54:armhf (6:9.14-1rpi1rpi1) ...
Setting up libraw1394-11:armhf (2.0.9-1) ...
Creating device node /dev/raw1394... /run/udev or .udevdb or .udev presence implies active udev.  Aborting MAKEDEV invocation.
done.
Setting up libdc1394-22:armhf (2.2.0-2) ...
Setting up libavdevice53:armhf (6:9.14-1rpi1rpi1) ...
Setting up libavresample1:armhf (6:9.14-1rpi1rpi1) ...
Setting up libopencv-core2.4 (2.4.1+dfsg-0exp2rpi2) ...
Setting up libopencv-imgproc2.4 (2.4.1+dfsg-0exp2rpi2) ...
Setting up libswscale2:armhf (6:9.14-1rpi1rpi1) ...
Setting up libavfilter3:armhf (6:9.14-1rpi1rpi1) ...
Setting up libav-tools (6:9.14-1rpi1rpi1) ...
E: IO Error to output - fwrite (28: No space left on device)
E: IO Error to output - fwrite (28: No space left on device)
pi@squeezeplug ~ $ sudo apt-get install -y libsox-fmt-mp3 sox libttspico-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libttspico-utils is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'libttspico-utils' has no installation candidate
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP

toufou
Timide
Messages : 140
Inscription : 25 juin 2014, 23:28

Re: [Sujet officiel] SqueezeBox Control

Message par toufou » 23 févr. 2016, 22:48

Code : Tout sélectionner

sudo apt-add-repository multiverse
me retourne:

Code : Tout sélectionner

jeedom@Jeedom:~$ sudo apt-add-repository multiverse
Traceback (most recent call last):
  File "/usr/bin/apt-add-repository", line 167, in <module>
    sp = SoftwareProperties(options=options)
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 105, in __init__
    self.reload_sourceslist()
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 595, in reload_sourceslist
    self.distro.get_sources(self.sourceslist)    
  File "/usr/lib/python3/dist-packages/aptsources/distro.py", line 89, in get_sources
    (self.id, self.codename))
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Raspbian/jessie

gpga
Actif
Messages : 755
Inscription : 03 mars 2015, 10:29
Localisation : 67 proche de Strasbourg

Re: [Sujet officiel] SqueezeBox Control

Message par gpga » 26 févr. 2016, 07:08

Bonjour,

depuis quelques jours la fonction 'parle' ne fonctionne plus, mes squeezbox ne disent plus rien.

Tout semble ok au niveau du plugin

Que dois je regarder pour retrouver un fonctionnement normal

Rem : la documentation n'est plus accessible par le plugin

Merci d'avance
1x Nuc I3 cible / Stick Aeon Gen5 / +- 30 modules Zwave / 7 cameras (Surveillance station)
1 x RPi2 source / Teleinfo USB
1 x Odroid C2 / Stick Aeon Gen 5 / 10 modules Zwave

Nicoboom
Timide
Messages : 221
Inscription : 03 sept. 2015, 22:08

Re: [Sujet officiel] SqueezeBox Control

Message par Nicoboom » 26 févr. 2016, 20:56

Bonjour,
depuis le passage en V2, je cumule les problèmes!
Concernant les squeezebox, au niveau de l'affichage, je n'ai plus d'actualisation, même si les boutons sont actifs ! De plus, je n’ai plus les dépendances picoTTS, et impossible de les réinstaller. Bref je suis perdu. Que faire ?
Merci
Nico

Ariolas
Timide
Messages : 45
Inscription : 18 déc. 2014, 19:29
Localisation : Dijon

Re: [Sujet officiel] SqueezeBox Control

Message par Ariolas » 28 févr. 2016, 18:30

Idem, depuis le passage en V2.0.1, je n'ai plus de communications dans le sens LMS => Jeedom.

Avatar de l’utilisateur
Fred
Timide
Messages : 134
Inscription : 15 août 2014, 16:57

Re: [Sujet officiel] SqueezeBox Control

Message par Fred » 28 févr. 2016, 18:59

Bonsoir,

Lors du passage en version 2.0.1 j'ai dû retourner dans les paramètres du plugin Jeedom dans le serveur LMS pour vérifier le complétement.

Après correction, la communication est revenue dans le sens LMS -> Jeedom.

Si ça peut aider.

Bonne soirée

gpga
Actif
Messages : 755
Inscription : 03 mars 2015, 10:29
Localisation : 67 proche de Strasbourg

Re: [Sujet officiel] SqueezeBox Control

Message par gpga » 28 févr. 2016, 22:38

Dans l'onglet plugin j'ai ce message d'erreur

Répertoire incorrect http://sourceforge.net/projects/lms-to- ... epo-sf.xml - Redirection limit exceeded

Que puis-je faire ???


Désolé, cela n'a rien à voir avec Squeezbox...
1x Nuc I3 cible / Stick Aeon Gen5 / +- 30 modules Zwave / 7 cameras (Surveillance station)
1 x RPi2 source / Teleinfo USB
1 x Odroid C2 / Stick Aeon Gen 5 / 10 modules Zwave

gpga
Actif
Messages : 755
Inscription : 03 mars 2015, 10:29
Localisation : 67 proche de Strasbourg

Re: [Sujet officiel] SqueezeBox Control

Message par gpga » 29 févr. 2016, 06:12

Fred a écrit :Bonsoir,

Lors du passage en version 2.0.1 j'ai dû retourner dans les paramètres du plugin Jeedom dans le serveur LMS pour vérifier le complétement.

Après correction, la communication est revenue dans le sens LMS -> Jeedom.

Si ça peut aider.

Bonne soirée
Merci j'ai fait la même chose et mon problème est également réglé, j'ai aussi corrigé une erreur d'adresse IP dans la page 'réseau' qui était complétement différente de la mienne.
1x Nuc I3 cible / Stick Aeon Gen5 / +- 30 modules Zwave / 7 cameras (Surveillance station)
1 x RPi2 source / Teleinfo USB
1 x Odroid C2 / Stick Aeon Gen 5 / 10 modules Zwave

Ariolas
Timide
Messages : 45
Inscription : 18 déc. 2014, 19:29
Localisation : Dijon

Re: [Sujet officiel] SqueezeBox Control

Message par Ariolas » 29 févr. 2016, 08:03

idem, pb reglé. Il m'a fallu mettre le port (suis sur docker) dans "complément" et non pas dans l'IP, puis redémarrer complètement le LMS

Répondre

Revenir vers « [Plugin Officiel] SqueezeBox Control »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 6 invités