Plugin Abeille
-
- Timide
- Messages : 89
- Inscription : 26 janv. 2017, 09:20
- Localisation : Région de Niort (79)
Re: Plugin Abeille
Bonsoir comment connaître la version du firmware de la zigate avec le plugin abeille ?
Jeedom | RPI3 DIY # Everspring SA413-1 | RFLink R48 |
Protocoles | Radio 433MHz, Zwave, Bluetooth, Wifi | Mon matériel : ici
Protocoles | Radio 433MHz, Zwave, Bluetooth, Wifi | Mon matériel : ici
Re: Plugin Abeille
Sur l objet abeille.goldorakiller a écrit :Bonsoir comment connaître la version du firmware de la zigate avec le plugin abeille ?
Dans les prochaines versions (déjà sur master) ça sera sur la page du plugin.
Re: Plugin Abeille
@yoyo23, il faut que je teste. Je ne me souviens plus.
Re: Plugin Abeille
Ok. J'ai oublié de préciser que je suis en version master
Jeedom 3.2.12 Raspberry Pi 3
ZiGate | Z-Wave Plus Z-Stick GEN5
ZiGate | Z-Wave Plus Z-Stick GEN5
-
- Timide
- Messages : 17
- Inscription : 27 déc. 2018, 23:07
Re: Plugin Abeille
Bonjour tous,
Je vais paraître pour un gros noob. Mais j'ai une ampoule HUe que je ne pas intégrer.
et je suis incapable de donner le nom de l'ampoule...
Je vais paraître pour un gros noob. Mais j'ai une ampoule HUe que je ne pas intégrer.
et je suis incapable de donner le nom de l'ampoule...
Re: Plugin Abeille
Il faut que tu mettes le plugin en debug redémarre le démon et que tu partages le log AbeilleParser lorsque tu fais l inclusion.
-
- Timide
- Messages : 17
- Inscription : 27 déc. 2018, 23:07
Re: Plugin Abeille
Le log remonte rien.
AbeilleParser 2019-02-02 00:31:23[DEBUG]Starting parsing from /tmp/AbeilleDeamonInput to mqtt broker with log level debug on jeedom:jeedom@127.0.0.1:1883 qos=0
AbeilleParser 2019-02-02 00:31:23[DEBUG]Starting parsing from /tmp/AbeilleDeamonInput to mqtt broker with log level debug on jeedom:jeedom@127.0.0.1:1883 qos=0
AbeilleParser 2019-02-02 00:31:23[DEBUG]Create a MQTT Client
AbeilleParser 2019-02-02 00:31:23[DEBUG]try part
AbeilleParser 2019-02-02 00:31:46[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ec
AbeilleParser 2019-02-02 00:31:46[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:31:47[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:31:47[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:31:48[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:32:02[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:02[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:03[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:32:03[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:32:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:33:02[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:02[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:03[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:33:03[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:33:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:31:23[DEBUG]Starting parsing from /tmp/AbeilleDeamonInput to mqtt broker with log level debug on jeedom:jeedom@127.0.0.1:1883 qos=0
AbeilleParser 2019-02-02 00:31:23[DEBUG]Starting parsing from /tmp/AbeilleDeamonInput to mqtt broker with log level debug on jeedom:jeedom@127.0.0.1:1883 qos=0
AbeilleParser 2019-02-02 00:31:23[DEBUG]Create a MQTT Client
AbeilleParser 2019-02-02 00:31:23[DEBUG]try part
AbeilleParser 2019-02-02 00:31:46[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ec
AbeilleParser 2019-02-02 00:31:46[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:31:47[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:31:47[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:31:48[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:32:02[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:02[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:03[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:32:03[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:32:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:32:05[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:33:02[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:02[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:03[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:33:03[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:33:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:33:05[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
Re: Plugin Abeille
Elle n'est pas incluse dans la zigate visiblement.
Il faut lui faire faire un reset pour qu'elle se joigne au réseau.
https://github.com/KiwiHC16/Abeille/blo ... hilips-hue
Il faut lui faire faire un reset pour qu'elle se joigne au réseau.
https://github.com/KiwiHC16/Abeille/blo ... hilips-hue
Re: Plugin Abeille
Ce que je viens de voir dans mes traces c'est le groupe 0000 qui est utilisé par lebouton remote Ikea (Je viens de lire la meme info par un autre utilisateur).
Re: Plugin Abeille
Merci. Cela pose-t-il un problème ? Je viens de tester à l'instant en forçant le groupe 0000 sur la prise... sans succès.
Jeedom 3.2.12 Raspberry Pi 3
ZiGate | Z-Wave Plus Z-Stick GEN5
ZiGate | Z-Wave Plus Z-Stick GEN5
-
- Timide
- Messages : 17
- Inscription : 27 déc. 2018, 23:07
Re: Plugin Abeille
J'ai effectué un reset de l'ampoule (elle a clignoté 3 fois). Je relance le log et rien de mieux.
AbeilleParser 2019-02-02 00:48:03[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:03[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:04[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:48:04[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:48:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ee
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:49:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:05[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:49:05[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:49:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:48:03[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:03[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:04[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:48:04[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:48:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ee
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:48:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 00:49:04[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:04[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:05[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 00:49:05[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 00:49:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 00:49:07[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
Re: Plugin Abeille
Mais comme tu peux voir:
AbeilleParser 2019-02-02 00:48:04[DEBUG]Nombre d'abeilles: 0
Il n'a pas d'équipements associés à la ZiGate.
Comment fais tu le reset de l ampoule ?
As tu démarré le réseau ?
AbeilleParser 2019-02-02 00:48:04[DEBUG]Nombre d'abeilles: 0
Il n'a pas d'équipements associés à la ZiGate.
Comment fais tu le reset de l ampoule ?
As tu démarré le réseau ?
Re: Plugin Abeille
Je viens de mettre 0000 sur une ampoule et la prise et cela fonctionne.
Est ce bien de cette remote dont on parle: https://homekitnews.com/wp-content/uplo ... remote.jpg
Re: Plugin Abeille
Oui il s'agit bien de cette remote On/Off. Quelle est ta procédure de test ?kiwihc16 a écrit : ↑02 févr. 2019, 00:58Je viens de mettre 0000 sur une ampoule et la prise et cela fonctionne.
Est ce bien de cette remote dont on parle: https://homekitnews.com/wp-content/uplo ... remote.jpg
Jeedom 3.2.12 Raspberry Pi 3
ZiGate | Z-Wave Plus Z-Stick GEN5
ZiGate | Z-Wave Plus Z-Stick GEN5
-
- Timide
- Messages : 17
- Inscription : 27 déc. 2018, 23:07
Re: Plugin Abeille
pour le reset j'utilise l(interrupteur philips en appuyant sur I et O.
j'ai démarré le reseau et lancé l'inclusion
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8024; ( Network joined / formed )(Processed->MQTT); Satus; Failed (ZigBee event codes): 04; short addr : 00; extended address : ;Channel : 0
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ef
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:34[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:04[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 01:01:04[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
Re: Plugin Abeille
AJouter la remote a la zigate en mode inclusion, 4 appuis sur bouton dans remote.yoyo23 a écrit : ↑02 févr. 2019, 01:00Oui il s'agit bien de cette remote On/Off. Quelle est ta procédure de test ?kiwihc16 a écrit : ↑02 févr. 2019, 00:58Je viens de mettre 0000 sur une ampoule et la prise et cela fonctionne.
Est ce bien de cette remote dont on parle: https://homekitnews.com/wp-content/uplo ... remote.jpg
Ajouter ampoule a la zigate en mode inclusion, 6 On, Off/On
Ajouter prise a la zigate en mode inclusion, trombone 10s
Ajouter groupe 0000 a l ampoule/prise
Ajouter le groupe 0000 dans les parametres de la remote dans abeille.
Re: Plugin Abeille
As tu d'autres équipements que tu peux inclure pour tester ? Car la ca ne semble pas fonctionner.acrobatfou a écrit : ↑02 févr. 2019, 01:03
pour le reset j'utilise l(interrupteur philips en appuyant sur I et O.
j'ai démarré le reseau et lancé l'inclusion
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8024; ( Network joined / formed )(Processed->MQTT); Satus; Failed (ZigBee event codes): 04; short addr : 00; extended address : ;Channel : 0
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ef
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:34[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:04[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 01:01:04[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
-
- Timide
- Messages : 17
- Inscription : 27 déc. 2018, 23:07
Re: Plugin Abeille
Rien sous le coude sauf l'interrupteur Philips.kiwihc16 a écrit : ↑02 févr. 2019, 01:08As tu d'autres équipements que tu peux inclure pour tester ? Car la ca ne semble pas fonctionner.acrobatfou a écrit : ↑02 févr. 2019, 01:03
pour le reset j'utilise l(interrupteur philips en appuyant sur I et O.
j'ai démarré le reseau et lancé l'inclusion
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8024; ( Network joined / formed )(Processed->MQTT); Satus; Failed (ZigBee event codes): 04; short addr : 00; extended address : ;Channel : 0
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:23[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: ef
AbeilleParser 2019-02-02 01:00:32[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:00:33[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:00:34[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:03[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:04[DEBUG];type; 8015; (Abeille List)(Processed->MQTT) Payload: 00
AbeilleParser 2019-02-02 01:01:04[DEBUG]Nombre d'abeilles: 0
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:05[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; (Status)(Not Processed); Length: 5; Status: 00-(Success); SQN: 00
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8000; SQN: 0 for messages which are not transmitted over the air.
AbeilleParser 2019-02-02 01:01:06[DEBUG];type; 8014; ( “Permit join” status response)(Processed->MQTT); Permit Join Status: 01
A savoir l'ampoule vient d'un pack noel amazon. Elle a été vendu avec une amazon echo plus.
Cdt
Re: Plugin Abeille
Alors chapeau. Ça fonctionne parfaitement. Il me manquait l'ajout du groupe 0000 sur la remote.kiwihc16 a écrit : ↑02 févr. 2019, 01:07AJouter la remote a la zigate en mode inclusion, 4 appuis sur bouton dans remote.yoyo23 a écrit : ↑02 févr. 2019, 01:00Oui il s'agit bien de cette remote On/Off. Quelle est ta procédure de test ?kiwihc16 a écrit : ↑02 févr. 2019, 00:58
Je viens de mettre 0000 sur une ampoule et la prise et cela fonctionne.
Est ce bien de cette remote dont on parle: https://homekitnews.com/wp-content/uplo ... remote.jpg
Ajouter ampoule a la zigate en mode inclusion, 6 On, Off/On
Ajouter prise a la zigate en mode inclusion, trombone 10s
Ajouter groupe 0000 a l ampoule/prise
Ajouter le groupe 0000 dans les parametres de la remote dans abeille.
Du coup, comment procéder si plusieurs remote On/Off pour contrôler différentes équipements étant donné qu'ils auront tous un groupe à 0000 ?
Encore merci pour ta réactivité.
Jeedom 3.2.12 Raspberry Pi 3
ZiGate | Z-Wave Plus Z-Stick GEN5
ZiGate | Z-Wave Plus Z-Stick GEN5
Re: Plugin Abeille
Si tu fais un I et 0 assez long (voir tres long), que l ampoule réagi, que la zigate en en mode inclusion alors je ne peux pas beaucoup plus t'aider car après il faut sniffer le trafic.
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 7 invités