Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

Démon nok suite restauration

Retrouvez ici des sujets concernant le protocole Z-Wave et les modules domotiques de type Z-Wave utilisés avec JEEDOM
Répondre
pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Démon nok suite restauration

Message par pipersw » 30 déc. 2017, 11:48

Bonjour,

Suite à un plantage de ESXI, j'ai réinstallé directement Debian 9.3.0 (netinst) et Jeedom sur le NUC Hystou.
Après restauration de ma sauvegarde d'hier, et remise à plat des droits des répertoires, tout refonctionne sauf le démon Open Z-Wave qui refuse de démarrer.
J'ai tué le démon pour le relancer, j'ai débranché la clé Aeon Gen5 pendant une nuit, rien n'y fait.

La clé est bien détectée sur le port tty/ACCM0.

Page santé:

Code : Tout sélectionner

	Résultat	Conseil
Système à jour	OK	
Cron actif	OK	
Scénario actif	OK	
Démarré	OK (2017-12-30 00:54:01)	
Date système	OK	
Authentification par défaut	OK	
Droits sudo	OK	
Version Jeedom	3.1.7	
Version PHP	7.0.19-1	
Version OS	Linux jeedom 4.9.0-4-amd64 #1 SMP Debian 4.9.65-3+deb9u1 (2017-12-23) x86_64 GNU/Linux [9.3]	
Version database	10.1.26-MariaDB-0+deb9u1	
Espace disque libre	89 %	
Mémoire disponible	89 %	
Swap disponible	100 %	
Charge	0 - 0 - 0	
Configuration réseau interne	OK	
Configuration réseau externe	OK	
Persistance du cache	OK (2017-12-30 11:30:02)	
Plugins	1 NOK
lsusb:

Code : Tout sélectionner

Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 13d3:3315 IMC Networks Bluetooth module
Bus 002 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 003: ID 0658:0200 Sigma Designs, Inc.
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dépendance zwave:

Code : Tout sélectionner

Lancement de l'installation/mise à jour des dépendances openzwave
Ign:1 http://ftp.fr.debian.org/debian stretch InRelease
Hit:2 http://ftp.fr.debian.org/debian stretch-updates InRelease
Hit:3 http://ftp.fr.debian.org/debian stretch Release
Hit:4 http://security.debian.org/debian-security stretch/updates InRelease
Ign:5 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Hit:6 https://deb.nodesource.com/node_5.x jessie InRelease
Hit:7 http://cdn-fastly.deb.debian.org/debian stretch Release
Reading package lists...
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version (12.3).
g++ is already the newest version (4:6.3.0-4).
gcc is already the newest version (4:6.3.0-4).
git is already the newest version (1:2.11.0-3+deb9u2).
libjpeg-dev is already the newest version (1:1.5.1-2).
python-louie is already the newest version (1.1-2.1).
python-lxml is already the newest version (3.7.1-1).
make is already the newest version (4.1-9.1).
mercurial is already the newest version (4.0-1+deb9u1).
python-serial is already the newest version (3.2.1-1).
python-dev is already the newest version (2.7.13-2).
python-pip is already the newest version (9.0.1-2).
python-setuptools is already the newest version (33.1.1-1).
python-pyudev is already the newest version (0.21.0-1).
python-requests is already the newest version (2.12.4-1).
python-sphinx is already the newest version (1.4.9-2).
libudev-dev is already the newest version (232-25+deb9u1).
unzip is already the newest version (6.0-21).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Installation des dependances Python
Requirement already satisfied: sphinxcontrib-blockdiag in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: blockdiag>=1.5.0 in /usr/local/lib/python2.7/dist-packages (from sphinxcontrib-blockdiag)
Requirement already satisfied: Sphinx>=0.6 in /usr/lib/python2.7/dist-packages (from sphinxcontrib-blockdiag)
Requirement already satisfied: webcolors in /usr/local/lib/python2.7/dist-packages (from blockdiag>=1.5.0->sphinxcontrib-blockdiag)
Requirement already satisfied: setuptools in /usr/lib/python2.7/dist-packages (from blockdiag>=1.5.0->sphinxcontrib-blockdiag)
Requirement already satisfied: funcparserlib in /usr/local/lib/python2.7/dist-packages (from blockdiag>=1.5.0->sphinxcontrib-blockdiag)
Requirement already satisfied: Pillow in /usr/lib/python2.7/dist-packages (from blockdiag>=1.5.0->sphinxcontrib-blockdiag)
Requirement already satisfied: sphinxcontrib-actdiag in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: sphinxcontrib-nwdiag in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: sphinxcontrib-seqdiag in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: urwid in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied: nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Requirement already satisfied: flask in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: flask-restful in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: flask-httpauth in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: six in /usr/lib/python2.7/dist-packages
Requirement already satisfied: tornado in /usr/local/lib/python2.7/dist-packages
mkdir: cannot create directory '/opt': File exists
Désinstallation de la version précédente
Installation de Python-OpenZwave
Not uninstalling cython at /usr/lib/python2.7/dist-packages, outside environment /usr
apt-get install --force-yes -y cython
Reading package lists...
Building dependency tree...
Reading state information...
cython is already the newest version (0.25.2-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Installing dependencies for python : 2 7 13
apt-get install --force-yes -y python-pip python-dev python-docutils python-setuptools python-louie
Reading package lists...
Building dependency tree...
Reading state information...
python-louie is already the newest version (1.1-2.1).
python-dev is already the newest version (2.7.13-2).
python-docutils is already the newest version (0.13.1+dfsg-2).
python-pip is already the newest version (9.0.1-2).
python-setuptools is already the newest version (33.1.1-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version (12.3).
g++ is already the newest version (4:6.3.0-4).
libudev-dev is already the newest version (232-25+deb9u1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
apt-get install --force-yes -y cython
Reading package lists...
Building dependency tree...
Reading state information...
cython is already the newest version (0.25.2-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
pip install nose-html
Requirement already satisfied: nose-html in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: nose>=0.11.1 in /usr/lib/python2.7/dist-packages (from nose-html)
pip install nose-progressive
Requirement already satisfied: nose-progressive in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: nose>=1.2.1 in /usr/lib/python2.7/dist-packages (from nose-progressive)
Requirement already satisfied: blessings<2.0,>=1.3 in /usr/local/lib/python2.7/dist-packages (from nose-progressive)
pip install coverage
Requirement already satisfied: coverage in /usr/local/lib/python2.7/dist-packages
pip install nose
Requirement already satisfied: nose in /usr/lib/python2.7/dist-packages
pip install pylint
Requirement already satisfied: pylint in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: six in /usr/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: mccabe in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: singledispatch; python_version < "3.4" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: isort>=4.2.5 in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: configparser; python_version == "2.7" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: backports.functools-lru-cache; python_version == "2.7" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: astroid<2.0 in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: enum34>=1.1.3; python_version < "3.4" in /usr/lib/python2.7/dist-packages (from astroid<2.0->pylint)
Requirement already satisfied: lazy-object-proxy in /usr/local/lib/python2.7/dist-packages (from astroid<2.0->pylint)
Requirement already satisfied: wrapt in /usr/local/lib/python2.7/dist-packages (from astroid<2.0->pylint)
#pip install docutils
#pip install setuptools
#The following line crashes with a core dump
#pip install "Cython==0.22"

Dependencies for users installed (python 2 7 13)
sed -i -e '253s/.*//' openzwave/cpp/src/value_classes/ValueID.h
cd openzwave && make
make[1]: Entering directory '/opt/python-openzwave/openzwave'
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/build/ -w 
make[2]: Entering directory '/opt/python-openzwave/openzwave/cpp/build'
Building OpenZWave Version 1.4.-1
Building tinystr.o
Building tinyxmlerror.o
Building tinyxml.o
Building tinyxmlparser.o
Building hid.o
Building aeskey.o
Building aescrypt.o
Building aestab.o
Building aes_modes.o
Building SensorAlarm.o
Building SensorMultilevel.o
Building Version.o
Building ThermostatOperatingState.o
Building Language.o
Building ZWavePlusInfo.o
Building Indicator.o
Building CRC16Encap.o
Building MultiInstance.o
Building MeterPulse.o
Building SensorBinary.o
Building ControllerReplication.o
Building ThermostatFanMode.o
Building Basic.o
Building BasicWindowCovering.o
Building Configuration.o
Building Battery.o
Building Hail.o
Building SwitchToggleBinary.o
Building TimeParameters.o
Building ClimateControlSchedule.o
Building Color.o
Building BarrierOperator.o
Building ThermostatSetpoint.o
Building EnergyProduction.o
Building ApplicationStatus.o
Building SwitchToggleMultilevel.o
Building CentralScene.o
Building DoorLockLogging.o
Building MultiChannelAssociation.o
Building Protection.o
Building CommandClass.o
Building NodeNaming.o
Building Meter.o
Building Lock.o
Building WakeUp.o
Building MultiCmd.o
Building SceneActivation.o
Building Powerlevel.o
Building DoorLock.o
Building AssociationCommandConfiguration.o
Building SwitchMultilevel.o
Building DeviceResetLocally.o
Building Association.o
Building Security.o
Building ManufacturerSpecific.o
Building UserCode.o
Building Clock.o
Building Alarm.o
Building CommandClasses.o
Building ThermostatFanState.o
Building NoOperation.o
Building SwitchAll.o
Building Proprietary.o
Building ThermostatMode.o
Building SwitchBinary.o
Building Value.o
Building ValueList.o
Building ValueButton.o
Building ValueInt.o
Building ValueStore.o
Building ValueDecimal.o
Building ValueRaw.o
Building ValueString.o
Building ValueByte.o
Building ValueBool.o
Building ValueSchedule.o
Building ValueShort.o
Building Controller.o
Building Wait.o
Building Thread.o
Building Stream.o
Building Log.o
Building HidController.o
Building Mutex.o
Building SerialController.o
Building Event.o
Building FileOps.o
Building TimeStamp.o
Building FileOpsImpl.o
Building TimeStampImpl.o
Building WaitImpl.o
Building ThreadImpl.o
Building LogImpl.o
Building MutexImpl.o
Building SerialControllerImpl.o
Building EventImpl.o
Building Options.o
Building Scene.o
Building Utils.o
Building Driver.o
Building ZWSecurity.o
Building Group.o
Building Node.o
Building Manager.o
Building Msg.o
Building Notification.o
Creating vers.cpp
Building vers.o
Linking Static Library
Linking Shared Library
Making ozw_config file
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/build'
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/examples/MinOZW/ -w 
make[2]: Entering directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
Building Main.o
Linking /opt/python-openzwave/openzwave/.lib/MinOZW
g++   -o /opt/python-openzwave/openzwave/.lib/MinOZW /opt/python-openzwave/openzwave/.lib/Main.o /opt/python-openzwave/openzwave/libopenzwave.so -pthread
Creating Temporary Shell Launch Script
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory '/opt/python-openzwave/openzwave'
python setup-lib.py build
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/src-lib
creating build/temp.linux-x86_64-2.7/src-lib/libopenzwave
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-x86_64-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined
 #define PY_SSIZE_T_CLEAN
 
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
                 from openzwave/cpp/src/Driver.h:42,
                 from src-lib/libopenzwave/libopenzwave.cpp:459:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
 #pragma warning( disable : 4324 )
 
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
 #pragma warning( default : 4324 )
 
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_268beginControllerCommand(__pyx_obj_12libopenzwave_PyManager*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:29891:204: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated [-Wdeprecated-declarations]
   __pyx_t_6 = __Pyx_PyBool_FromLong(__pyx_v_self->manager->BeginControllerCommand(__pyx_t_1, __pyx_t_2, __pyx_f_12libopenzwave_ctrl_callback, ((void *)__pyx_v_pythonfunc), __pyx_t_3, __pyx_t_4, __pyx_t_5)); if (unlikely(!__pyx_t_6)) __PYX_ERR(0, 4120, __pyx_L1_error)
                                                                                                                                                                                                            ^
src-lib/libopenzwave/libopenzwave.cpp:545:36: note: in definition of macro '__Pyx_PyBool_FromLong'
 #define __Pyx_PyBool_FromLong(b) ((b) ? __Pyx_NewRef(Py_True) : __Pyx_NewRef(Py_False))
                                    ^
In file included from src-lib/libopenzwave/libopenzwave.cpp:464:0:
openzwave/cpp/src/Manager.h:1731:19: note: declared here
   DEPRECATED bool BeginControllerCommand( uint32 const _homeId, Driver::ControllerCommand _command, Driver::pfnControllerCallback_t _callback = NULL, void* _context = NULL, bool _highPower = false, uint8 _nodeId = 0xff, uint8 _arg = 0 );
                   ^~~~~~~~~~~~~~~~~~~~~~
creating build/lib.linux-x86_64-2.7
x86_64-linux-gnu-g++ -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-x86_64-2.7/src-lib/libopenzwave/libopenzwave.o openzwave/libopenzwave.a -ludev -lstdc++ -o build/lib.linux-x86_64-2.7/libopenzwave.so
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-x86_64/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-x86_64
creating build/bdist.linux-x86_64/egg
copying build/lib.linux-x86_64-2.7/libopenzwave.so -> build/bdist.linux-x86_64/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-x86_64/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-x86_64/egg
running install_data
creating build/bdist.linux-x86_64/egg/config
creating build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
writing build/bdist.linux-x86_64/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.1-py2.7-linux-x86_64.egg' and adding 'build/bdist.linux-x86_64/egg' to it
removing 'build/bdist.linux-x86_64/egg' (and everything under it)
Processing libopenzwave-0.3.1-py2.7-linux-x86_64.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Extracting libopenzwave-0.3.1-py2.7-linux-x86_64.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.1 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Processing dependencies for libopenzwave==0.3.1
Searching for six==1.10.0
Best match: six 1.10.0
Adding six 1.10.0 to easy-install.pth file

Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.1

Installation of lib finished.
python setup-api.py install
running install
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-x86_64/egg
running install_lib
running build_py
creating build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-x86_64-2.7/openzwave
creating build/bdist.linux-x86_64/egg
creating build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/group.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/singleton.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/command.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/value.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/scene.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/controller.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/node.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/__init__.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/object.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/network.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/option.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/libopenzwave.so -> build/bdist.linux-x86_64/egg
byte-compiling build/bdist.linux-x86_64/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/singleton.py to singleton.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/value.py to value.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/node.py to node.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/network.py to network.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/option.py to option.pyc
creating build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
writing build/bdist.linux-x86_64/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.1-py2.7.egg' and adding 'build/bdist.linux-x86_64/egg' to it
removing 'build/bdist.linux-x86_64/egg' (and everything under it)
Processing openzwave-0.3.1-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Extracting openzwave-0.3.1-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.1 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Processing dependencies for openzwave==0.3.1
Searching for libopenzwave==0.3.1
Best match: libopenzwave 0.3.1
Processing libopenzwave-0.3.1-py2.7-linux-x86_64.egg
libopenzwave 0.3.1 is already the active version in easy-install.pth

Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Searching for Louie==1.1
Best match: Louie 1.1
Adding Louie 1.1 to easy-install.pth file

Using /usr/lib/python2.7/dist-packages
Searching for six==1.10.0
Best match: six 1.10.0
Adding six 1.10.0 to easy-install.pth file

Using /usr/lib/python2.7/dist-packages
Searching for nose==1.3.7
Best match: nose 1.3.7
Adding nose 1.3.7 to easy-install.pth file
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin

Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.1

Installation of API finished.
Everything is successfully installed!
log du démon:

Code : Tout sélectionner

[2017-12-30 01:08:28][INFO] : Lancement démon openzwave : /usr/bin/python /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/openzwaved.py  --device /dev/ttyACM0 --loglevel debug --port 8083 --config_folder /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/config --data_folder /var/www/html/plugins/openzwave/core/class/../../data --callback http://127.0.0.1:80/plugins/openzwave/core/php/jeeZwave.php --apikey xxxxxxx --suppressRefresh 0 --cycle 0.3 --pid /tmp/jeedom/openzwave/deamon.pid
('The dependency of openzwave plugin are not installed. Please check the plugin openzwave configuration page for instructions', 'error')
('Error: cannot import name RequestHandler', 'error')
[2017-12-30 01:08:58][ERROR] : Impossible de lancer le démon openzwave, relancer le démon en debug et vérifiez la log
Je ne vois pas d'erreur dans le log du coup je ne vois pas pourquoi il ne démarre pas

J'ai essayé :

Code : Tout sélectionner

sudo nano /etc/udev/rules.d/98-usb-serial.rules
SUBSYSTEM=="tty", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="ttyUSB21"
c'est pareil

Bosquetia
Actif
Messages : 6783
Inscription : 10 mai 2016, 07:54

Re: Démon nok suite restauration

Message par Bosquetia » 30 déc. 2017, 17:31

Tu peux essayer de passer les logs et debug ?
La config du plugin est bonne dans jeedom (port usb, port etc...)

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 30 déc. 2017, 21:28

C'est ce que j'ai posté en premier les log en debug.

Envoyé de mon FRD-L09 en utilisant Tapatalk


pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 30 déc. 2017, 21:33

Ma configuration marchait avant en vm. La seule différence est la version de debian qui était en version 8.x avant

Envoyé de mon FRD-L09 en utilisant Tapatalk


pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 30 déc. 2017, 22:58

En allant sur la santé dans le plugin, j'ai vu ceci :
Echec de la requête http : http://127.0.0.1:8083/network?type=info ... nXksIneGgA Curl error : Failed to connect to 127.0.0.1 port 8083: Connection refused

Ce serait donc un problème de droits.

Edit : c'est normal vu que le démon ne démarre pas.

J'ai réappliqué les droits :

Code : Tout sélectionner

sudo chmod 775 -R /var/www/html
sudo chown -R www-data:www-data /var/www/html
Pas de changements. Je me connecte en SSH avec les droits root.

Si je me connecte sur http://ipjeedom:8083, je n'ai pas de réponse du serveur open z-wave.

Avatar de l’utilisateur
Nibb31
Actif
Messages : 2155
Inscription : 17 févr. 2015, 15:29

Re: Démon nok suite restauration

Message par Nibb31 » 30 déc. 2017, 23:13

Tu bien paramétré la configuration réseau ? Tout est OK sur la page Santé ?
Jeedom: VM ProxMox sur serveur i7-2760QM, RAM 8Go
Zwave + RFXCom433E + Hue

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 30 déc. 2017, 23:18

conf reseau ok, et la page santé tout est ok sauf le plugin z-wave.
Si je me logue en utilisateur en ssh, et que je lance un sudo j'ai "usern'apparaît pas dans le fichier sudoers. Cet événement sera signalé." mais je ne pense pas que ca ai un rapport vu que je fais tout en root.

page santé:

Code : Tout sélectionner

	Résultat	Conseil
Système à jour	OK	
Cron actif	OK	
Scénario actif	OK	
Démarré	OK (2017-12-30 00:54:01)	
Date système	OK	
Authentification par défaut	OK	
Droits sudo	OK	
Version Jeedom	3.1.7	
Version PHP	7.0.19-1	
Version OS	Linux jeedom 4.9.0-4-amd64 #1 SMP Debian 4.9.65-3+deb9u1 (2017-12-23) x86_64 GNU/Linux [9.3]	
Version database	10.1.26-MariaDB-0+deb9u1	
Espace disque libre	89 %	
Mémoire disponible	89 %	
Swap disponible	100 %	
Charge	0 - 0 - 0	
Configuration réseau interne	OK	
Configuration réseau externe	OK	
Persistance du cache	OK (2017-12-30 11:30:02)	
Plugins	1 NOK

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 01 janv. 2018, 17:34

Avancement : si je fais une fresh install de Debian 9.3.0 stretch avec Jeedom (sans restauration), je lance la compilation des dépendances et ca s'arrete à 50% avec ces beau écran sur le HYSTOU FMP03:
Image
Image

Je recommence juste une install de Debian et durant l'install j'ai cet écran maintenant:
Image

Donc le problème vient soit du PC, soit du SSD, soit de Debian. J'ai téléchargé l'iso à nouveau et ca fait pareil.
Dernière édition par pipersw le 01 janv. 2018, 17:34, édité 1 fois.

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 01 janv. 2018, 21:40

Suite des investigations :
Test de la mémoire avec Memtest86 : OK

Formatage et installation de Debian Jessie : OK
Installation de Jeedom : OK
Compilation dépendance Open Z-wave OK:

Code : Tout sélectionner

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/raising_non_exception_py3.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/raising_non_exception_py3.py", line 13
    raise Exc from missing # [raising-non-exception]
                 ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/return_outside_function.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/return_outside_function.py", line 2
    return # [return-outside-function]
SyntaxError: 'return' outside function

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/reused_outer_loop_variab/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/used_prior_global_declaration.py:10: SyntaxWarning: name 'CONST' is used prior to global declaration
  global CONST
le_py3.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/reused_outer_loop_variable_py3.py", line 3
    for i, *j in [(1, 2, 3, 4)]:
           ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/star_needs_assignment_target.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/star_needs_assignment_target.py", line 3
    FIRST = *[1, 2]  # [star-needs-assignment-target]
            ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/star_needs_assignment_target_py35.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/star_needs_assignment_target_py35.py", line 8
    UNPACK_TUPLE = (*range(4), 4)
                    ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/stop_iteration_inside_generator.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/stop_iteration_inside_generator.py", line 81
    yield from gen_ok()
             ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/string_formatting_py3.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/string_formatting_py3.py", line 6
    print('%s%s%s' % ('eggs', *meat))
                              ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/syntax_error.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/syntax_error.py", line 1
    def toto # [syntax-error]
                            ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/syntax_error_jython.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/syntax_error_jython.py", line 1
    def toto # [syntax-error]
                            ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/too_many_star_expressions.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/too_many_star_expressions.py", line 3
    *FIRST, *SECOND = [1, 2, 3] # [too-many-star-expressions]
    ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unbalanced_tuple_unpacking_py30.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unbalanced_tuple_unpacking_py30.py", line 9
    first, second, *last = (1, 2, 3, 4)
                   ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/undefined_variable_py30.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/undefined_variable_py30.py", line 8
    def test(self)->Undefined: # [undefined-variable]
                  ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unpacking_generalizations.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unpacking_generalizations.py", line 16
    func_variadic_args(*(2, 3), *(3, 4), *(4, 5))
                                ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unused_argument_py3.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unused_argument_py3.py", line 3
    def func(first, *, second): # [unused-argument, unused-argument]
                     ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unused_typing_imports.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/unused_typing_imports.py", line 12
    def func1(arg: Optional[Callable]=None):
                 ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/used_before_assignment_nonlocal.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/used_before_assignment_nonlocal.py", line 10
    nonlocal cnt
               ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/useless_super_delegation_py3.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/useless_super_delegation_py3.py", line 6
    def not_passing_keyword_only(self, first, *, second):
                                               ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/useless_super_delegation_py35.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/useless_super_delegation_py35.py", line 5
    def not_passing_all_params(self, first, *args, second=None, **kwargs):
                                                        ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_from_iterable_py33.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_from_iterable_py33.py", line 7
    yield from 10  # [not-an-iterable]
             ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_from_outside_func.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_from_outside_func.py", line 2
    yield from [1, 2]  # [yield-outside-function]
             ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_inside_async_function.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_inside_async_function.py", line 4
    async def good_coro():
            ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_inside_async_function_py36.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_inside_async_function_py36.py", line 4
    async def good_coro():
            ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_outside_func.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/functional/yield_outside_func.py", line 2
    yield 1  # [yield-outside-function]
SyntaxError: 'yield' outside function

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/input/func_return_yield_mix_py_33.py ...
SyntaxError: 'return' with argument inside generator (func_return_yield_mix_py_33.py, line 8)

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/input/func_unused_import_py30.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/input/func_unused_import_py30.py", line 10
    class Meta(metaclass=abc.ABCMeta):
                        ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/regrtest_data/bad_package/__init__.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/regrtest_data/bad_package/__init__.py", line 2
    raise missing.Missing..
                          ^
SyntaxError: invalid syntax

Compiling /tmp/pip-build-A_8jDc/pylint/pylint/test/regrtest_data/syntax_error.py ...
  File "/tmp/pip-build-A_8jDc/pylint/pylint/test/regrtest_data/syntax_error.py", line 1
    class A extends B {}
                  ^
SyntaxError: invalid syntax

  Running setup.py install for configparser
    
    Skipping installation of /usr/local/lib/python2.7/dist-packages/backports/__init__.py (namespace package)
    Installing /usr/local/lib/python2.7/dist-packages/configparser-3.5.0-nspkg.pth
Compiling /tmp/pip-build-A_8jDc/astroid/astroid/tests/testdata/python2/data/invalid_encoding.py ...
  File "/tmp/pip-build-A_8jDc/astroid/astroid/tests/testdata/python2/data/invalid_encoding.py", line 0
SyntaxError: unknown encoding: lala

Compiling /tmp/pip-build-A_8jDc/astroid/astroid/tests/testdata/python3/data/invalid_encoding.py ...
  File "/tmp/pip-build-A_8jDc/astroid/astroid/tests/testdata/python3/data/invalid_encoding.py", line 0
SyntaxError: unknown encoding: lala

  Running setup.py install for wrapt
    building 'wrapt._wrappers' extension
    x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -I/usr/include/python2.7 -c src/wrapt/_wrappers.c -o build/temp.linux-x86_64-2.7/src/wrapt/_wrappers.o
    x86_64-linux-gnu-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-x86_64-2.7/src/wrapt/_wrappers.o -o build/lib.linux-x86_64-2.7/wrapt/_wrappers.so
    
  Running setup.py install for lazy-object-proxy
    
    warning: no files found matching '.isort.cfg'
    warning: no previously-included files matching '*.py[cod]' found anywhere in distribution
    warning: no previously-included files matching '__pycache__' found anywhere in distribution
    warning: no previously-included files matching '*.so' found anywhere in distribution
    warning: no previously-included files matching '*.dylib' found anywhere in distribution
    building 'lazy_object_proxy.cext' extension
    x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -Isrc/lazy_object_proxy -I/usr/include/python2.7 -c src/lazy_object_proxy/cext.c -o build/temp.linux-x86_64-2.7/src/lazy_object_proxy/cext.o
    x86_64-linux-gnu-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-x86_64-2.7/src/lazy_object_proxy/cext.o -o build/lib.linux-x86_64-2.7/lazy_object_proxy/cext.so
Successfully installed pylint configparser astroid isort backports.functools-lru-cache mccabe wrapt enum34 lazy-object-proxy
Cleaning up...
#pip install docutils
#pip install setuptools
#The following line crashes with a core dump
#pip install "Cython==0.22"

Dependencies for users installed (python 2 7 9)
sed -i -e '253s/.*//' openzwave/cpp/src/value_classes/ValueID.h
cd openzwave && make
make[1]: Entering directory '/opt/python-openzwave/openzwave'
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/build/ -w 
make[2]: Entering directory '/opt/python-openzwave/openzwave/cpp/build'
Building OpenZWave Version 1.4.-1
Building tinystr.o
Building tinyxmlerror.o
Building tinyxml.o
Building tinyxmlparser.o
Building hid.o
Building aeskey.o
Building aescrypt.o
Building aestab.o
Building aes_modes.o
Building Security.o
Building Proprietary.o
Building SwitchToggleMultilevel.o
Building Clock.o
Building Language.o
Building Color.o
Building ZWavePlusInfo.o
Building Indicator.o
Building MeterPulse.o
Building DoorLock.o
Building ManufacturerSpecific.o
Building Lock.o
Building ThermostatFanMode.o
Building MultiChannelAssociation.o
Building SwitchAll.o
Building Configuration.o
Building CommandClass.o
Building ThermostatMode.o
Building SwitchToggleBinary.o
Building Version.o
Building TimeParameters.o
Building UserCode.o
Building SensorAlarm.o
Building BarrierOperator.o
Building ThermostatSetpoint.o
Building ClimateControlSchedule.o
Building ApplicationStatus.o
Building SwitchMultilevel.o
Building CentralScene.o
Building Protection.o
Building ThermostatOperatingState.o
Building NodeNaming.o
Building Meter.o
Building WakeUp.o
Building BasicWindowCovering.o
Building Association.o
Building Hail.o
Building MultiCmd.o
Building SceneActivation.o
Building Powerlevel.o
Building AssociationCommandConfiguration.o
Building SensorMultilevel.o
Building Battery.o
Building CRC16Encap.o
Building SensorBinary.o
Building MultiInstance.o
Building Alarm.o
Building Basic.o
Building CommandClasses.o
Building ThermostatFanState.o
Building NoOperation.o
Building EnergyProduction.o
Building DeviceResetLocally.o
Building DoorLockLogging.o
Building ControllerReplication.o
Building SwitchBinary.o
Building Value.o
Building ValueList.o
Building ValueButton.o
Building ValueInt.o
Building ValueStore.o
Building ValueDecimal.o
Building ValueRaw.o
Building ValueString.o
Building ValueByte.o
Building ValueBool.o
Building ValueSchedule.o
Building ValueShort.o
Building Wait.o
Building Thread.o
Building Controller.o
Building Stream.o
Building Log.o
Building HidController.o
Building Mutex.o
Building SerialController.o
Building Event.o
Building FileOps.o
Building TimeStamp.o
Building FileOpsImpl.o
Building TimeStampImpl.o
Building WaitImpl.o
Building ThreadImpl.o
Building LogImpl.o
Building MutexImpl.o
Building SerialControllerImpl.o
Building EventImpl.o
Building Options.o
Building Scene.o
Building Utils.o
Building Driver.o
Building ZWSecurity.o
Building Group.o
Building Node.o
Building Manager.o
Building Msg.o
Building Notification.o
Creating vers.cpp
Building vers.o
Linking Static Library
Linking Shared Library
Making ozw_config file
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/build'
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/examples/MinOZW/ -w 
make[2]: Entering directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
Building Main.o
Linking /opt/python-openzwave/openzwave/.lib/MinOZW
g++   -o /opt/python-openzwave/openzwave/.lib/MinOZW /opt/python-openzwave/openzwave/.lib/Main.o /opt/python-openzwave/openzwave/libopenzwave.so -pthread
Creating Temporary Shell Launch Script
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory '/opt/python-openzwave/openzwave'
python setup-lib.py build
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/src-lib
creating build/temp.linux-x86_64-2.7/src-lib/libopenzwave
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-x86_64-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined
 #define PY_SSIZE_T_CLEAN
 ^
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
                 from openzwave/cpp/src/Driver.h:42,
                 from src-lib/libopenzwave/libopenzwave.cpp:249:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
 #pragma warning( disable : 4324 )
 ^
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
 #pragma warning( default : 4324 )
 ^
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_268beginControllerCommand(__pyx_obj_12libopenzwave_PyManager*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:27543:204: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated (declared at openzwave/cpp/src/Manager.h:1731) [-Wdeprecated-declarations]
   __pyx_t_6 = __Pyx_PyBool_FromLong(__pyx_v_self->manager->BeginControllerCommand(__pyx_t_1, __pyx_t_2, __pyx_f_12libopenzwave_ctrl_callback, ((void *)__pyx_v_pythonfunc), __pyx_t_3, __pyx_t_4, __pyx_t_5)); if (unlikely(!__pyx_t_6)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4120; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
                                                                                                                                                                                                            ^
src-lib/libopenzwave/libopenzwave.cpp:329:36: note: in definition of macro '__Pyx_PyBool_FromLong'
 #define __Pyx_PyBool_FromLong(b) ((b) ? (Py_INCREF(Py_True), Py_True) : (Py_INCREF(Py_False), Py_False))
                                    ^
creating build/lib.linux-x86_64-2.7
c++ -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-x86_64-2.7/src-lib/libopenzwave/libopenzwave.o openzwave/libopenzwave.a -ludev -lstdc++ -o build/lib.linux-x86_64-2.7/libopenzwave.so
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-x86_64/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-x86_64
creating build/bdist.linux-x86_64/egg
copying build/lib.linux-x86_64-2.7/libopenzwave.so -> build/bdist.linux-x86_64/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-x86_64/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-x86_64/egg
running install_data
creating build/bdist.linux-x86_64/egg/config
creating build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
writing build/bdist.linux-x86_64/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.1-py2.7-linux-x86_64.egg' and adding 'build/bdist.linux-x86_64/egg' to it
removing 'build/bdist.linux-x86_64/egg' (and everything under it)
Processing libopenzwave-0.3.1-py2.7-linux-x86_64.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Extracting libopenzwave-0.3.1-py2.7-linux-x86_64.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.1 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Processing dependencies for libopenzwave==0.3.1
Searching for six==1.8.0
Best match: six 1.8.0
Adding six 1.8.0 to easy-install.pth file

Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.1

Installation of lib finished.
python setup-api.py install
running install
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-x86_64/egg
running install_lib
running build_py
creating build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-x86_64-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-x86_64-2.7/openzwave
creating build/bdist.linux-x86_64/egg
creating build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/object.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/__init__.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/value.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/command.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/scene.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/node.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/group.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/network.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/option.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/controller.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/openzwave/singleton.py -> build/bdist.linux-x86_64/egg/openzwave
copying build/lib.linux-x86_64-2.7/libopenzwave.so -> build/bdist.linux-x86_64/egg
byte-compiling build/bdist.linux-x86_64/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/value.py to value.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/node.py to node.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/network.py to network.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/option.py to option.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-x86_64/egg/openzwave/singleton.py to singleton.pyc
creating build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
writing build/bdist.linux-x86_64/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.1-py2.7.egg' and adding 'build/bdist.linux-x86_64/egg' to it
removing 'build/bdist.linux-x86_64/egg' (and everything under it)
Processing openzwave-0.3.1-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Extracting openzwave-0.3.1-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.1 to easy-install.pth file

Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Processing dependencies for openzwave==0.3.1
Searching for libopenzwave==0.3.1
Best match: libopenzwave 0.3.1
Processing libopenzwave-0.3.1-py2.7-linux-x86_64.egg
libopenzwave 0.3.1 is already the active version in easy-install.pth

Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-x86_64.egg
Searching for Louie==1.1
Best match: Louie 1.1
Louie 1.1 is already the active version in easy-install.pth

Using /usr/lib/python2.7/dist-packages
Searching for six==1.8.0
Best match: six 1.8.0
six 1.8.0 is already the active version in easy-install.pth

Using /usr/lib/python2.7/dist-packages
Searching for nose==1.3.4
Best match: nose 1.3.4
nose 1.3.4 is already the active version in easy-install.pth
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin

Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.1

Installation of API finished.
Everything is successfully installed!
Si je selectionne le port tty/ACM0, le démon démarre bien.

Code : Tout sélectionner

[2018-01-01 21:32:05][DEBUG] : addValueId : Notification : {'homeId': 3414430587, 'valueId': {'index': 0, 'units': u'', 'type': 'Bool', 'nodeId': 15, 'value': True, 'commandClass': 'COMMAND_CLASS_SWITCH_BINARY', 'instance': 1, 'readOnly': False, 'homeId': 3414430587, 'label': u'Switch', 'genre': 'User', 'id': 72057594294386688L}, 'notificationType': 'ValueChanged', 'nodeId': 15}
[2018-01-01 21:32:05][DEBUG] : notif_callback : call callback context
[2018-01-01 21:32:05][DEBUG] : zwcallback args=[{'homeId': 3414430587, 'valueId': {'index': 0, 'units': u'', 'type': 'Bool', 'nodeId': 15, 'value': True, 'commandClass': 'COMMAND_CLASS_SWITCH_BINARY', 'instance': 1, 'readOnly': False, 'homeId': 3414430587, 'label': u'Switch', 'genre': 'User', 'id': 72057594294386688L}, 'notificationType': 'ValueChanged', 'nodeId': 15}]
[2018-01-01 21:32:05][DEBUG] : Z-Wave Notification ValueChanged : {'homeId': 3414430587, 'valueId': {'index': 0, 'units': u'', 'type': 'Bool', 'nodeId': 15, 'value': True, 'commandClass': 'COMMAND_CLASS_SWITCH_BINARY', 'instance': 1, 'readOnly': False, 'homeId': 3414430587, 'label': u'Switch', 'genre': 'User', 'id': 72057594294386688L}, 'notificationType': 'ValueChanged', 'nodeId': 15}
[2018-01-01 21:32:05][DEBUG] : value_update. 15 Switch
[2018-01-01 21:32:05][INFO] : Received Switch binary report from node 15: Switch=True
[2018-01-01 21:32:05][DEBUG] : A node value has been updated. nodeId:15 value:Switch
[2018-01-01 21:32:05][DEBUG] : notif_callback : end
[2018-01-01 21:32:05][DEBUG] : notif_callback : new notification
[2018-01-01 21:32:05][DEBUG] : notif_callback : Notification type : 0, nodeId : 15
[2018-01-01 21:32:05][DEBUG] : addValueId : ValueID : 72057594294583362
[2018-01-01 21:32:05][DEBUG] : addValueId : GetCommandClassId : 49, GetType : 2
[2018-01-01 21:32:05][DEBUG] : addValueId : Notification : {'homeId': 3414430587, 'valueId': {'index': 4, 'units': u'W', 'type': 'Decimal', 'nodeId': 15, 'value': 125.80000305175781, 'commandClass': 'COMMAND_CLASS_SENSOR_MULTILEVEL', 'instance': 1, 'readOnly': True, 'homeId': 3414430587, 'label': u'Power', 'genre': 'User', 'id': 72057594294583362L}, 'notificationType': 'ValueAdded', 'nodeId': 15}
[2018-01-01 21:32:05][DEBUG] : notif_callback : call callback context
[2018-01-01 21:32:05][DEBUG] : zwcallback args=[{'homeId': 3414430587, 'valueId': {'index': 4, 'units': u'W', 'type': 'Decimal', 'nodeId': 15, 'value': 125.80000305175781, 'commandClass': 'COMMAND_CLASS_SENSOR_MULTILEVEL', 'instance': 1, 'readOnly': True, 'homeId': 3414430587, 'label': u'Power', 'genre': 'User', 'id': 72057594294583362L}, 'notificationType': 'ValueAdded', 'nodeId': 15}]
[2018-01-01 21:32:05][DEBUG] : Z-Wave Notification ValueAdded : {'homeId': 3414430587, 'valueId': {'index': 4, 'units': u'W', 'type': 'Decimal', 'nodeId': 15, 'value': 125.80000305175781, 'commandClass': 'COMMAND_CLASS_SENSOR_MULTILEVEL', 'instance': 1, 'readOnly': True, 'homeId': 3414430587, 'label': u'Power', 'genre': 'User', 'id': 72057594294583362L}, 'notificationType': 'ValueAdded', 'nodeId': 15}
[2018-01-01 21:32:05][DEBUG] : Create object value (valueId:72057594294583362)
[2018-01-01 21:32:05][DEBUG] : notif_callback : end
[2018-01-01 21:32:05][DEBUG] : notif_callback : new notification
[2018-01-01 21:32:05][DEBUG] : notif_callback : Notification type : 2, nodeId : 15
[2018-01-01 21:32:05][DEBUG] : addValueId : ValueID : 72057594294583362
[2018-01-01 21:32:05][DEBUG] : addValueId : GetCommandClassId : 49, GetType : 2
[2018-01-01 21:32:05][DEBUG] : addValueId : Notification : {'homeId': 3414430587, 'valueId': {'index': 4, 'units': u'W', 'type': 'Decimal', 'nodeId': 15, 
Donc le soucis vient du passage de Debian Jessie 8.1.0 à Stretch 9.3.0 pour un HYSTOU FMP03.

Il y a moyen de remonter cela à l'équipe Jeedom ?

Bosquetia
Actif
Messages : 6783
Inscription : 10 mai 2016, 07:54

Re: Démon nok suite restauration

Message par Bosquetia » 02 janv. 2018, 08:37

Heu je comprends pas tu nous montres un kernel panic à l'installation de l'OS dans la dernière image de ton post précédent et tu veux le remonter à l'équipe ?

Sinon compilation des dépendances tu dis OK !! Tu as bien lu le log ?? Pour moi c'est absolument pas ok


Tu es en DIY, tu as choisi un hardware qui n'est pas supporté officiellement, tu as un kernel panic à l'installation, donc ce n'est pas Jeedom...
Pas de support...

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 02 janv. 2018, 09:08

OK pas de support, mais j'essayais de comprendre pourquoi j'avais un soucis de dépendance avec un debian stretch qui est marqué comme officiellement supporté dans la doc, et je n'ai de soucis que sur ce seul plugin, tous les autres fonctionnent.

J'ai partagé mon soucis car je ne suis pas le seul sur le nuc de rosty, maintenant je vais aller dans la section DIY pour la suite.

Il y a des syntax error dans le log, mais à la fin la dernière ligne indique que tout est bon, et tout remarche comme avant en debian jessie.

ps: c'est peut-être pas la peine de s'énerver pour une nouvelle année ? je pense avoir été calme et pas injurieux dans mon post.

Bosquetia
Actif
Messages : 6783
Inscription : 10 mai 2016, 07:54

Re: Démon nok suite restauration

Message par Bosquetia » 02 janv. 2018, 11:53

D"une je ne suis pas énervé, de deux je te dis juste ce qu'il en est...

Oui debian 9 est supporté, pas ton hardware.
En plus kernel panic, on est loin de jeedom, surtout à l'installation de debian !

pipersw
Actif
Messages : 642
Inscription : 28 juil. 2014, 18:54
Localisation : Massy (91)

Re: Démon nok suite restauration

Message par pipersw » 02 janv. 2018, 13:55

Pas de soucis.
Merci.

kenaddams42
Timide
Messages : 80
Inscription : 18 oct. 2016, 12:06

Re: Démon nok suite restauration

Message par kenaddams42 » 01 mai 2018, 17:57

Hello,

Je rencontre ce même problème sur mon Jeedom depuis une restauration.

The dependency of openzwave plugin are not installed. Please check the plugin openzwave configuration page for instructions
Error: cannot import name RequestHandler

Est-ce que finalement ce problème a été résolu ? Je précise que je tourne sous RPI-3 et j'ai installé Jeedom 3 via le script officiel d'installation. Les dépendances sont bien OK d'après le plugin Zwave. Aucune erreur à signaler à ce stade.

Une idée ?

Merci,
++

philazuma
Timide
Messages : 43
Inscription : 08 janv. 2016, 15:14

Re: Démon nok suite restauration

Message par philazuma » 29 janv. 2019, 23:43

bonjour,

j'ai visiblement le même problème.
avez vous touvé une solution?

Répondre

Revenir vers « [Plugin Officiel] Z-Wave »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité