Je viens de refaire une installation complete de mon Rasp mais impossible de faire fonctionner z-wave.
Détails de la configuration:
- raspberry Pi 3 B+
- 2018-11-13-raspbian-stretch-lite
- carte razberry
Voici les logs de Openzwave:
et les logs de Openzwaved[2018-12-28 19:39:53][INFO] : ******** The ZWave network is being started ********
[2018-12-28 19:39:53][INFO] : Start Openzwave network.
[2018-12-28 19:39:53][INFO] : OpenZwave Library Version 1.4.0
[2018-12-28 19:39:53][INFO] : Python-OpenZwave Wrapper Version 0.3.1
[2018-12-28 19:39:53][INFO] : --> pass
[2018-12-28 19:39:53][WARNING] : Z-Wave Notification DriverFailed : {'homeId': 0L, 'notificationType': 'DriverFailed', 'nodeId': 255}
[2018-12-28 19:39:53][INFO] : Waiting for network to become ready
[2018-12-28 19:39:53][ERROR] : Openzwave network can't load
[2018-12-28 19:39:53][ERROR] : Openzwave network can't load
[2018-12-28 19:39:54][INFO] : Démon openzwave lancé
Les pages santés et réseaux zwave sont vides, aucunes données ne sont remontées.2018-12-28 19:39:53.806 Always, OpenZwave Version 1.4.0 Starting Up
2018-12-28 19:39:53.810 Info, Setting Up Provided Network Key for Secure Communications
2018-12-28 19:39:53.811 Info, mgr, Added driver for controller /dev/ttyAMA0
2018-12-28 19:39:53.811 Info, Opening controller /dev/ttyAMA0
2018-12-28 19:39:53.811 Info, Trying to open serial port /dev/ttyAMA0 (attempt 1)
2018-12-28 19:39:53.811 Info, Serial port /dev/ttyAMA0 opened (attempt 1)
2018-12-28 19:39:53.811 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) - FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
Configuration Merci pour votre aide.
Malgrè des recherches je n'ai pas réussi à trouver une solution