J'ai le même soucis que fog4000 et sylvouille, les paramètres de mes prises ne sont pas pris en compte. J'ai le problème sur toutes mes prises (des smart plug et des micro smart plug de Nodon).
Code : Tout sélectionner
[2019-09-12 08:58:52][DEBUG] : Client connected to [127.0.0.1:44310]
[2019-09-12 08:58:52][DEBUG] : Message read from socket: {"apikey":"QpuwQvwuGZFUidNUFaTSDRmmDBOPE782MYBeb0msVOY8pB8k","cmd":"add","device":{"id":"0506A13A","profils":[{"func":"01","type":"0b","rorg":"d2","ignoreRelease":"","allButtons":""}]}}
[2019-09-12 08:58:52][DEBUG] : Client disconnected from [127.0.0.1:44310]
[2019-09-12 08:58:52][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2019-09-12 08:58:52][DEBUG] : Received command from jeedom : add
[2019-09-12 08:58:52][DEBUG] : Add device : {u'id': u'0506A13A', u'profils': [{u'rorg': u'd2', u'ignoreRelease': u'', u'allButtons': u'', u'type': u'0b', u'func': u'01'}]}
[2019-09-12 08:58:52][DEBUG] : Client connected to [127.0.0.1:44311]
[2019-09-12 08:58:52][DEBUG] : Message read from socket: {"apikey":"QpuwQvwuGZFUidNUFaTSDRmmDBOPE782MYBeb0msVOY8pB8k","cmd":"send","dest":"0506A13A","profile":{"func":"01","rorg":"d2","type":"0b"},"command":{"DE":0,"LC":0,"DN":1,"DS":1,"IO":"1","command":"2"}}
[2019-09-12 08:58:52][DEBUG] : Client disconnected from [127.0.0.1:44311]
[2019-09-12 08:58:52][DEBUG] : Client connected to [127.0.0.1:44312]
[2019-09-12 08:58:52][DEBUG] : Message read from socket: {"apikey":"QpuwQvwuGZFUidNUFaTSDRmmDBOPE782MYBeb0msVOY8pB8k","cmd":"send","dest":"0506A13A","profile":{"func":"01","rorg":"d2","type":"0b"},"command":{"RM":1,"RE":0,"EP":1,"UN":3,"MAT":2550,"MIT":60,"IO":"0","command":"5"}}
[2019-09-12 08:58:52][DEBUG] : Client disconnected from [127.0.0.1:44312]
[2019-09-12 08:58:52][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2019-09-12 08:58:52][DEBUG] : Received command from jeedom : send
[2019-09-12 08:58:52][DEBUG] : Send command
[2019-09-12 08:58:52][DEBUG] : {u'DN': 1, u'DE': 0, u'LC': 0, u'IO': 1, u'DS': 1} on command 2 210 1 11
[2019-09-12 08:58:52][DEBUG] : [85, 0, 10, 7, 1, 235, 210, 2, 1, 0, 144, 255, 218, 163, 128, 0, 3, 5, 6, 161, 58, 255, 0, 138]
[2019-09-12 08:58:52][DEBUG] : [False, False, True, False]
[2019-09-12 08:58:52][DEBUG] : Last packet for this 05:06:A1:3A was emited 35.5915939808 seconds ago
[2019-09-12 08:58:52][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2019-09-12 08:58:52][DEBUG] : Received command from jeedom : send
[2019-09-12 08:58:52][DEBUG] : Send command
[2019-09-12 08:58:52][DEBUG] : {u'MAT': 2550, u'MIT': 60, u'RE': 0, u'UN': 3, u'IO': 0, u'RM': 1, u'EP': 1} on command 5 210 1 11
[2019-09-12 08:58:52][DEBUG] : [85, 0, 12, 7, 1, 150, 210, 5, 160, 3, 0, 255, 60, 255, 218, 163, 128, 0, 3, 5, 6, 161, 58, 255, 0, 37]
[2019-09-12 08:58:52][DEBUG] : [False, True, False, True]
[2019-09-12 08:58:52][DEBUG] : Last packet for this 05:06:A1:3A was emited 0.054750919342 seconds ago
[2019-09-12 08:58:52][DEBUG] : Waiting 0.445249080658 seconds FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x5', '0xa0', '0x3', '0x0', '0xff', '0x3c', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'CMD', {u'value': u'Command ID 5', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 5}), (u'RM', {u'value': u'Report measurement: query / auto reporting', u'description': u'Report measurement', u'unit': u'', u'raw_value': 1}), (u'RE', {u'value': u'Reset measurement: not active', u'description': u'Reset measurement', u'unit': u'', u'raw_value': 0}), (u'EP', {u'value': u'Power measurement ', u'description': u'Measurement mode', u'unit': u'', u'raw_value': 1}), (u'IO', {u'value': u'Output channel 0 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 0}), (u'MDLSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (LSB)', u'unit': u'', u'raw_value': 0}), (u'UN', {u'value': u'Power [W]', u'description': u'Unit', u'unit': u'', u'raw_value': 3}), (u'MDMSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (MSB)', u'unit': u'', u'raw_value': 0}), (u'MAT', {u'value': 2550.0, u'description': u'Maximum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 255}), (u'MIT', {u'value': 60.0, u'description': u'Minimum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 60})])
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x2', '0x1', '0x0', '0x90', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'DE', {u'value': u'Disable taught-in devices (with different EEP)', u'description': u'Taught-in devices', u'unit': u'', u'raw_value': 0}), (u'CMD', {u'value': u'Command ID 2', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 2}), (u'OC', {u'value': u'Over current shut down: static off', u'description': u'Over shut down', u'unit': u'', u'raw_value': 0}), (u'RO', {u'value': u'Reset over current shut down: not active', u'description': u'Reset over current shut down', u'unit': u'', u'raw_value': 0}), (u'LC', {u'value': u'Disable local control', u'description': u'Local Control', u'unit': u'', u'raw_value': 0}), (u'IO', {u'value': u'Output channel 1 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 1}), (u'DT2', {u'value': u'Not used', u'description': u'Dim timer 2', u'unit': u'', u'raw_value': 0}), (u'DT3', {u'value': u'Not used', u'description': u'Dim timer 3', u'unit': u'', u'raw_value': 0}), (u'DN', {u'value': u'Night Operation', u'description': u'User interface indication', u'unit': u'', u'raw_value': 1}), (u'PF', {u'value': u'Disable Power Failure Detection ', u'description': u'Power Failure', u'unit': u'', u'raw_value': 0}), (u'DS', {u'value': u'Default state: 100% or ON', u'description': u'Default State', u'unit': u'', u'raw_value': 1}), (u'DT1', {u'value': u'Not used', u'description': u'Dim timer 1', u'unit': u'', u'raw_value': 0})])
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x2', '0x1', '0x0', '0x90', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'DE', {u'value': u'Disable taught-in devices (with different EEP)', u'description': u'Taught-in devices', u'unit': u'', u'raw_value': 0}), (u'CMD', {u'value': u'Command ID 2', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 2}), (u'OC', {u'value': u'Over current shut down: static off', u'description': u'Over shut down', u'unit': u'', u'raw_value': 0}), (u'RO', {u'value': u'Reset over current shut down: not active', u'description': u'Reset over current shut down', u'unit': u'', u'raw_value': 0}), (u'LC', {u'value': u'Disable local control', u'description': u'Local Control', u'unit': u'', u'raw_value': 0}), (u'IO', {u'value': u'Output channel 1 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 1}), (u'DT2', {u'value': u'Not used', u'description': u'Dim timer 2', u'unit': u'', u'raw_value': 0}), (u'DT3', {u'value': u'Not used', u'description': u'Dim timer 3', u'unit': u'', u'raw_value': 0}), (u'DN', {u'value': u'Night Operation', u'description': u'User interface indication', u'unit': u'', u'raw_value': 1}), (u'PF', {u'value': u'Disable Power Failure Detection ', u'description': u'Power Failure', u'unit': u'', u'raw_value': 0}), (u'DS', {u'value': u'Default state: 100% or ON', u'description': u'Default State', u'unit': u'', u'raw_value': 1}), (u'DT1', {u'value': u'Not used', u'description': u'Dim timer 1', u'unit': u'', u'raw_value': 0})])
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x2', '0x1', '0x0', '0x90', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'DE', {u'value': u'Disable taught-in devices (with different EEP)', u'description': u'Taught-in devices', u'unit': u'', u'raw_value': 0}), (u'CMD', {u'value': u'Command ID 2', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 2}), (u'OC', {u'value': u'Over current shut down: static off', u'description': u'Over shut down', u'unit': u'', u'raw_value': 0}), (u'RO', {u'value': u'Reset over current shut down: not active', u'description': u'Reset over current shut down', u'unit': u'', u'raw_value': 0}), (u'LC', {u'value': u'Disable local control', u'description': u'Local Control', u'unit': u'', u'raw_value': 0}), (u'IO', {u'value': u'Output channel 1 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 1}), (u'DT2', {u'value': u'Not used', u'description': u'Dim timer 2', u'unit': u'', u'raw_value': 0}), (u'DT3', {u'value': u'Not used', u'description': u'Dim timer 3', u'unit': u'', u'raw_value': 0}), (u'DN', {u'value': u'Night Operation', u'description': u'User interface indication', u'unit': u'', u'raw_value': 1}), (u'PF', {u'value': u'Disable Power Failure Detection ', u'description': u'Power Failure', u'unit': u'', u'raw_value': 0}), (u'DS', {u'value': u'Default state: 100% or ON', u'description': u'Default State', u'unit': u'', u'raw_value': 1}), (u'DT1', {u'value': u'Not used', u'description': u'Dim timer 1', u'unit': u'', u'raw_value': 0})])
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : [85, 0, 10, 7, 1, 235, 210, 2, 1, 0, 144, 255, 218, 163, 128, 129, 1, 5, 6, 161, 58, 70, 0, 109]
[2019-09-12 08:58:52][DEBUG] : [False, False, True, False]
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-70 dBm): 0x01 ['0xd2', '0x2', '0x1', '0x0', '0x90', '0xff', '0xda', '0xa3', '0x80', '0x81'] ['0x1', '0x5', '0x6', '0xa1', '0x3a', '0x46', '0x0'] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : Ignore this is an echo
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x5', '0xa0', '0x3', '0x0', '0xff', '0x3c', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'CMD', {u'value': u'Command ID 5', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 5}), (u'RM', {u'value': u'Report measurement: query / auto reporting', u'description': u'Report measurement', u'unit': u'', u'raw_value': 1}), (u'RE', {u'value': u'Reset measurement: not active', u'description': u'Reset measurement', u'unit': u'', u'raw_value': 0}), (u'EP', {u'value': u'Power measurement ', u'description': u'Measurement mode', u'unit': u'', u'raw_value': 1}), (u'IO', {u'value': u'Output channel 0 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 0}), (u'MDLSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (LSB)', u'unit': u'', u'raw_value': 0}), (u'UN', {u'value': u'Power [W]', u'description': u'Unit', u'unit': u'', u'raw_value': 3}), (u'MDMSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (MSB)', u'unit': u'', u'raw_value': 0}), (u'MAT', {u'value': 2550.0, u'description': u'Maximum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 255}), (u'MIT', {u'value': 60.0, u'description': u'Minimum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 60})])
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x5', '0xa0', '0x3', '0x0', '0xff', '0x3c', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'CMD', {u'value': u'Command ID 5', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 5}), (u'RM', {u'value': u'Report measurement: query / auto reporting', u'description': u'Report measurement', u'unit': u'', u'raw_value': 1}), (u'RE', {u'value': u'Reset measurement: not active', u'description': u'Reset measurement', u'unit': u'', u'raw_value': 0}), (u'EP', {u'value': u'Power measurement ', u'description': u'Measurement mode', u'unit': u'', u'raw_value': 1}), (u'IO', {u'value': u'Output channel 0 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 0}), (u'MDLSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (LSB)', u'unit': u'', u'raw_value': 0}), (u'UN', {u'value': u'Power [W]', u'description': u'Unit', u'unit': u'', u'raw_value': 3}), (u'MDMSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (MSB)', u'unit': u'', u'raw_value': 0}), (u'MAT', {u'value': 2550.0, u'description': u'Maximum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 255}), (u'MIT', {u'value': 60.0, u'description': u'Minimum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 60})])
[2019-09-12 08:58:52][INFO] : Sending packet
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-255 dBm): 0x01 ['0xd2', '0x5', '0xa0', '0x3', '0x0', '0xff', '0x3c', '0xff', '0xda', '0xa3', '0x80', '0x0'] ['0x3', '0x5', '0x6', '0xa1', '0x3a', '0xff', '0x0'] OrderedDict([(u'CMD', {u'value': u'Command ID 5', u'description': u'Command indentifier', u'unit': u'', u'raw_value': 5}), (u'RM', {u'value': u'Report measurement: query / auto reporting', u'description': u'Report measurement', u'unit': u'', u'raw_value': 1}), (u'RE', {u'value': u'Reset measurement: not active', u'description': u'Reset measurement', u'unit': u'', u'raw_value': 0}), (u'EP', {u'value': u'Power measurement ', u'description': u'Measurement mode', u'unit': u'', u'raw_value': 1}), (u'IO', {u'value': u'Output channel 0 (to load)', u'description': u'I/O channel', u'unit': u'', u'raw_value': 0}), (u'MDLSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (LSB)', u'unit': u'', u'raw_value': 0}), (u'UN', {u'value': u'Power [W]', u'description': u'Unit', u'unit': u'', u'raw_value': 3}), (u'MDMSB', {u'value': 0.0, u'description': u'Measurement delta to be reported (MSB)', u'unit': u'', u'raw_value': 0}), (u'MAT', {u'value': 2550.0, u'description': u'Maximum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 255}), (u'MIT', {u'value': 60.0, u'description': u'Minimum time between two subsequent actuator messages', u'unit': u's', u'raw_value': 60})])
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : [85, 0, 1, 0, 2, 101, 0, 0]
[2019-09-12 08:58:52][DEBUG] : 0x02 ['0x0'] [] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : Receive response packet : 2
[2019-09-12 08:58:52][DEBUG] : Response is : OK
[2019-09-12 08:58:52][DEBUG] : [85, 0, 12, 7, 1, 150, 210, 5, 160, 3, 0, 255, 60, 255, 218, 163, 128, 129, 2, 5, 6, 161, 58, 79, 0, 25]
[2019-09-12 08:58:52][DEBUG] : [False, True, False, True]
[2019-09-12 08:58:52][DEBUG] : FF:DA:A3:80->05:06:A1:3A (-79 dBm): 0x01 ['0xd2', '0x5', '0xa0', '0x3', '0x0', '0xff', '0x3c', '0xff', '0xda', '0xa3', '0x80', '0x81'] ['0x2', '0x5', '0x6', '0xa1', '0x3a', '0x4f', '0x0'] OrderedDict()
[2019-09-12 08:58:52][DEBUG] : Ignore this is an echo