Forum Communauté Jeedom

Code : Tout sélectionner

Build your cc-tool
git clone https://github.com/dashesy/cc-tool.git
cd cc-tool
./configure
make
Download the firmware CC2531ZNP-Prod.hex
Flash your firmware
sudo ./cc-tool -e -w CC2531ZNP-Prod.hex

Code : Tout sélectionner

Installing
# Setup Node.js repository
# For Pi Zero use https://raw.githubusercontent.com/sdesalas/node-pi-zero/master/install-node-v8.10.0.sh
sudo curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -

# Install Node.js
sudo apt-get install -y nodejs git make g++ gcc

# Verify that the correct nodejs and npm (automatically installed with nodejs) 
# version has been installed
node --version  # Should output v8.X.X (at time of writing v8.11.2)
npm --version  # Should output > 5.X.X (at time of writing 5.6.0)

# Clone zigbee2mqtt repository
sudo git clone https://github.com/Koenkk/zigbee2mqtt.git /opt/zigbee2mqtt
sudo chown -R pi:pi /opt/zigbee2mqtt

# Install dependencies
cd /opt/zigbee2mqtt
npm install

Code : Tout sélectionner

# MQTT settings
mqtt:
  # MQTT base topic for zigbee2mqtt MQTT messages
  base_topic: zigbee2mqtt
  # MQTT server URL
  server: 'mqtt://localhost'
  # MQTT server authentication, uncomment if required:
  # user: my_user
  # password: my_password

Code : Tout sélectionner

# Stop zigbee2mqtt and go to directory
sudo systemctl stop zigbee2mqtt
cd /opt/zigbee2mqtt

# Backup configuration
cp -R data data-backup

# Update
git checkout HEAD -- npm-shrinkwrap.json
git pull
rm -rf node_modules
npm install

# Restore configuration
cp -R data-backup/* data
rm -rf data-backup

# Start zigbee2mqtt
sudo systemctl start zigbee2mqtt