je reinstal mon RPI 2 en 2.2.6 mais mes dependance ne passent pas en OK
fin de mes log
Code : Tout sélectionner
sed: can't read /etc/inittab: No such file or directory
Everything is successfully installed!Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
A très bientôt !
A très bientôt !
dependances 2.2.6
dependances 2.2.6
bonjour
je reinstal mon RPI 2 en 2.2.6 mais mes dependance ne passent pas en OK
fin de mes log
merci
je reinstal mon RPI 2 en 2.2.6 mais mes dependance ne passent pas en OK
fin de mes log
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
Ta carte ne serais pas passé en lecture seul ?
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Charte du forum
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
Re: dependances 2.2.6
salut kouaw,
non je pense pas , comment faire pour verifier ?
non je pense pas , comment faire pour verifier ?
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
beaucoup on le soucis en même temps
sans réel connaissance j'ai cherché :
on n'a pas de fichier/rep /etc/inittab sur rasp
sur un serveur oui ! (fichier)
une coquille c'est glissé apparemment lors de la maj.
mais c'est peut etre autre chose, mais comme c'est beaucoup en même temps.
faut attendre une solution, une investigation prend du temps
ou resto d'un backup sd.
ps : j'ai fait l'essai idem
ps2 (pour aide diagnostique)
j'ai effacé le répertoire openzwave est remis un ancien v2
la maj des dépendances donne le même résultat
sed: can't read /etc/inittab: No such file or directory
mais se lance et fonctionne
j'en suis à une réhinstallation forcé d'openzwave via market
ça relance les dépendances
avec erreur
sans réel connaissance j'ai cherché :
on n'a pas de fichier/rep /etc/inittab sur rasp
sur un serveur oui ! (fichier)
une coquille c'est glissé apparemment lors de la maj.
mais c'est peut etre autre chose, mais comme c'est beaucoup en même temps.
faut attendre une solution, une investigation prend du temps
ou resto d'un backup sd.
ps : j'ai fait l'essai idem
ps2 (pour aide diagnostique)
j'ai effacé le répertoire openzwave est remis un ancien v2
la maj des dépendances donne le même résultat
sed: can't read /etc/inittab: No such file or directory
mais se lance et fonctionne
j'en suis à une réhinstallation forcé d'openzwave via market
ça relance les dépendances
avec erreur
dependance ko v2.3.txt- (58.81 Kio) Téléchargé 19 fois
- dependance ok v2.txt
- (53.54 Kio) Téléchargé 18 fois
Re: dependances 2.2.6
les dépendances se sont bien exécuté, ça semble plus être lié au contrôle par jeedom si les dépendances sont ok ou non. pour une raison inconnue le plugin indique a jeedom qu'elle ne sont pas ok.
avez-vous aussi lancé la mise à jour des config de modules.
avez-vous aussi lancé la mise à jour des config de modules.
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Re: dependances 2.2.6
non je test en soirée
Re: dependances 2.2.6
Sur l'autre sujet si tu peux tester la cmd que donne, je pense qu'elle va donner 1 mais juste pour être sure. Je pense il faut réinstaller le plugin en mode forcé
Sent from my finger
Sent from my finger
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Re: dependances 2.2.6
malgré un grand nombre d'essais de reinstallation impossible de passer les dépendances en OK
toujours le meme log
toujours le meme log
Code : Tout sélectionner
Linking /opt/python-openzwave/openzwave/.lib/MinOZW
g++ -o /opt/python-openzwave/openzwave/.lib/MinOZW /opt/python-openzwave/openzwave/.lib/Main.o /opt/python-openzwave/openzwave/libopenzwave.so -pthread
Creating Temporary Shell Launch Script
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory '/opt/python-openzwave/openzwave'
python setup-lib.py build
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-armv7l-2.7
creating build/temp.linux-armv7l-2.7/src-lib
creating build/temp.linux-armv7l-2.7/src-lib/libopenzwave
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-armv7l-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined
#define PY_SSIZE_T_CLEAN
^
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
from openzwave/cpp/src/Driver.h:42,
from src-lib/libopenzwave/libopenzwave.cpp:249:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning [-Wunknown-pragmas]
#pragma warning( disable : 4324 )
^
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning [-Wunknown-pragmas]
#pragma warning( default : 4324 )
^
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_268beginControllerCommand(__pyx_obj_12libopenzwave_PyManager*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:27540:204: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated (declared at openzwave/cpp/src/Manager.h:1731) [-Wdeprecated-declarations]
__pyx_t_6 = __Pyx_PyBool_FromLong(__pyx_v_self->manager->BeginControllerCommand(__pyx_t_1, __pyx_t_2, __pyx_f_12libopenzwave_ctrl_callback, ((void *)__pyx_v_pythonfunc), __pyx_t_3, __pyx_t_4, __pyx_t_5)); if (unlikely(!__pyx_t_6)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4119; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
^
src-lib/libopenzwave/libopenzwave.cpp:329:36: note: in definition of macro '__Pyx_PyBool_FromLong'
#define __Pyx_PyBool_FromLong(b) ((b) ? (Py_INCREF(Py_True), Py_True) : (Py_INCREF(Py_False), Py_False))
^
creating build/lib.linux-armv7l-2.7
c++ -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-armv7l-2.7/src-lib/libopenzwave/libopenzwave.o openzwave/libopenzwave.a -ludev -lstdc++ -o build/lib.linux-armv7l-2.7/libopenzwave.so
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-armv7l
creating build/bdist.linux-armv7l/egg
copying build/lib.linux-armv7l-2.7/libopenzwave.so -> build/bdist.linux-armv7l/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-armv7l/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-armv7l/egg
running install_data
creating build/bdist.linux-armv7l/egg/config
copying openzwave/config/manufacturer_specific.xml -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/device_classes.xml -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/options.xml -> build/bdist.linux-armv7l/egg/config
creating build/bdist.linux-armv7l/egg/config/schlagelink
copying openzwave/config/schlagelink/minikeypad.xml -> build/bdist.linux-armv7l/egg/config/schlagelink
copying openzwave/config/schlagelink/itemp.xml -> build/bdist.linux-armv7l/egg/config/schlagelink
creating build/bdist.linux-armv7l/egg/config/merten
copying openzwave/config/merten/50x5xx.xml -> build/bdist.linux-armv7l/egg/config/merten
copying openzwave/config/merten/507801.xml -> build/bdist.linux-armv7l/egg/config/merten
creating build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/crc3100OctanRemote.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/cws3101wallswitch.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/asp3100SmartPlug.xml -> build/bdist.linux-armv7l/egg/config/nodon
copying openzwave/config/nodon/crc360xSofremote.xml -> build/bdist.linux-armv7l/egg/config/nodon
creating build/bdist.linux-armv7l/egg/config/sensative
copying openzwave/config/sensative/strips.xml -> build/bdist.linux-armv7l/egg/config/sensative
creating build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw500d.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw15s.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-sc7.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw20rm.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zw20r.xml -> build/bdist.linux-armv7l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-bpc.xml -> build/bdist.linux-armv7l/egg/config/enerwave
creating build/bdist.linux-armv7l/egg/config/fakro
copying openzwave/config/fakro/zws230.xml -> build/bdist.linux-armv7l/egg/config/fakro
copying openzwave/config/fakro/zws12.xml -> build/bdist.linux-armv7l/egg/config/fakro
creating build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/em52-zw.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/pm12-zw.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0005.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0007.xml -> build/bdist.linux-armv7l/egg/config/rcs
copying openzwave/config/rcs/therm0009.xml -> build/bdist.linux-armv7l/egg/config/rcs
creating build/bdist.linux-armv7l/egg/config/greenwave
copying openzwave/config/greenwave/powernode6.xml -> build/bdist.linux-armv7l/egg/config/greenwave
copying openzwave/config/greenwave/powernode1.xml -> build/bdist.linux-armv7l/egg/config/greenwave
creating build/bdist.linux-armv7l/egg/config/northq
copying openzwave/config/northq/nq92021.xml -> build/bdist.linux-armv7l/egg/config/northq
copying openzwave/config/northq/nq9121.xml -> build/bdist.linux-armv7l/egg/config/northq
creating build/bdist.linux-armv7l/egg/config/nexia
copying openzwave/config/nexia/db100z.xml -> build/bdist.linux-armv7l/egg/config/nexia
creating build/bdist.linux-armv7l/egg/config/swiid
copying openzwave/config/swiid/swiidinter.xml -> build/bdist.linux-armv7l/egg/config/swiid
copying openzwave/config/swiid/swiidplug.xml -> build/bdist.linux-armv7l/egg/config/swiid
creating build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/panicbtn.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/watersensor.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw120_doorwindow.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/hem.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/ledbulb.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/sei2.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/ses2a.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/doorbell_gen5.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsd31.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dws6.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/minimote.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/ses2.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/multisensor_gen5.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/hdss_gen5.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zstickgen5.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/drycontactsensor.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw062_garage_door_controller.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/keyfob.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/sei.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/recessed_doorsensor_gen5.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/keyfob2.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/zw112_doorwindow6.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/alms.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/mmc.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/ss6.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/hemg2.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/sd6.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/multisensor6.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/ses.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/msesv2.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/doorwindow.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/recessed_doorsensor.xml -> build/bdist.linux-armv7l/egg/config/aeotec
copying openzwave/config/aeotec/dsd37.xml -> build/bdist.linux-armv7l/egg/config/aeotec
creating build/bdist.linux-armv7l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_cometz.xml -> build/bdist.linux-armv7l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_stellaz.xml -> build/bdist.linux-armv7l/egg/config/eurotronic
creating build/bdist.linux-armv7l/egg/config/vitrum
copying openzwave/config/vitrum/vitrumBS.xml -> build/bdist.linux-armv7l/egg/config/vitrum
creating build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHNDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHIA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHAA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHCA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHADx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHCDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJD1.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHLAx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHDDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHDA2.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHTAx.xml -> build/bdist.linux-armv7l/egg/config/qubino
copying openzwave/config/qubino/ZMNHSDx.xml -> build/bdist.linux-armv7l/egg/config/qubino
creating build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/hsm100.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/ztroller.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/ezmotionplus.xml -> build/bdist.linux-armv7l/egg/config/homeseer
copying openzwave/config/homeseer/hsm200.xml -> build/bdist.linux-armv7l/egg/config/homeseer
creating build/bdist.linux-armv7l/egg/config/frostdale
copying openzwave/config/frostdale/fdn2nxx.xml -> build/bdist.linux-armv7l/egg/config/frostdale
creating build/bdist.linux-armv7l/egg/config/qees
copying openzwave/config/qees/reto-plugin-switch.xml -> build/bdist.linux-armv7l/egg/config/qees
copying openzwave/config/qees/reto-dimmer-plus.xml -> build/bdist.linux-armv7l/egg/config/qees
creating build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/keypad.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/doorlock.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
copying openzwave/config/polycontrol/polylock.xml -> build/bdist.linux-armv7l/egg/config/polycontrol
creating build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pse02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/psr04.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan08.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/phpat02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02-b.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02-1c.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/psm02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pst02.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan04.xml -> build/bdist.linux-armv7l/egg/config/philio
copying openzwave/config/philio/pan03.xml -> build/bdist.linux-armv7l/egg/config/philio
creating build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/srt323.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/asrzw.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/ses303.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/sir321.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/scsc17.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/hrt4zw.xml -> build/bdist.linux-armv7l/egg/config/horstmann
copying openzwave/config/horstmann/ses302.xml -> build/bdist.linux-armv7l/egg/config/horstmann
creating build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zts-110.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zurc.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zfm-80.xml -> build/bdist.linux-armv7l/egg/config/remotec
copying openzwave/config/remotec/zxt-120.xml -> build/bdist.linux-armv7l/egg/config/remotec
creating build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/relay.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/12724-dimmer.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/dimmer.xml -> build/bdist.linux-armv7l/egg/config/ge
copying openzwave/config/ge/dimmer_module.xml -> build/bdist.linux-armv7l/egg/config/ge
creating build/bdist.linux-armv7l/egg/config/thermofloor
copying openzwave/config/thermofloor/heatit021.xml -> build/bdist.linux-armv7l/egg/config/thermofloor
creating build/bdist.linux-armv7l/egg/config/dragontech
copying openzwave/config/dragontech/wd-100.xml -> build/bdist.linux-armv7l/egg/config/dragontech
creating build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zrp110.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdw103.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdm230.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zdw232.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zrw103.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/lfm20.xml -> build/bdist.linux-armv7l/egg/config/act
copying openzwave/config/act/zir010.xml -> build/bdist.linux-armv7l/egg/config/act
creating build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct101.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct50e.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct100.xml -> build/bdist.linux-armv7l/egg/config/2gig
copying openzwave/config/2gig/ct30.xml -> build/bdist.linux-armv7l/egg/config/2gig
creating build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/zwfb.xml -> build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/ZWES1000.xml -> build/bdist.linux-armv7l/egg/config/duwi
copying openzwave/config/duwi/ZWESJ300.xml -> build/bdist.linux-armv7l/egg/config/duwi
creating build/bdist.linux-armv7l/egg/config/linear
copying openzwave/config/linear/PD300Z-2.xml -> build/bdist.linux-armv7l/egg/config/linear
copying openzwave/config/linear/WD500Z-1.xml -> build/bdist.linux-armv7l/egg/config/linear
creating build/bdist.linux-armv7l/egg/config/schlage
copying openzwave/config/schlage/BE469NXCEN.xml -> build/bdist.linux-armv7l/egg/config/schlage
creating build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz66d.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz68.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tsp01.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz88.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/sm103.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz65d.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz67.xml -> build/bdist.linux-armv7l/egg/config/wenzhou
creating build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs211.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgms.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgwpe.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgd211.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgd212.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgbs001.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgk001.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs212.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgfs101.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgrgbwm441.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgrm222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgr222.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgs221.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgsd002.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgss101.xml -> build/bdist.linux-armv7l/egg/config/fibaro
copying openzwave/config/fibaro/fgr221.xml -> build/bdist.linux-armv7l/egg/config/fibaro
creating build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa3.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/mimolite.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa2.xml -> build/bdist.linux-armv7l/egg/config/fortrezz
creating build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/tse03.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sf812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/ad146.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/hsp02.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st815.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an180.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sp814.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sm103.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/se812.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an181.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/st814.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an179.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an158.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/sp103.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/ad147.xml -> build/bdist.linux-armv7l/egg/config/everspring
copying openzwave/config/everspring/an145.xml -> build/bdist.linux-armv7l/egg/config/everspring
creating build/bdist.linux-armv7l/egg/config/widom
copying openzwave/config/widom/UBS104.xml -> build/bdist.linux-armv7l/egg/config/widom
copying openzwave/config/widom/UME304C_S.xml -> build/bdist.linux-armv7l/egg/config/widom
creating build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vrf01.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vri06.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/rzi10.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vri10.xml -> build/bdist.linux-armv7l/egg/config/leviton
copying openzwave/config/leviton/vrcpg.xml -> build/bdist.linux-armv7l/egg/config/leviton
creating build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/PanicButton.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/1poleswitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/PluginDimmer.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/BuiltinDimmer.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/HeatingControl.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/SceneController.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/2poleswitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/EnergySwitch.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/DoorSensor.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/Molite.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/AlarmSound.xml -> build/bdist.linux-armv7l/egg/config/BeNext
copying openzwave/config/BeNext/TagReader.xml -> build/bdist.linux-armv7l/egg/config/BeNext
creating build/bdist.linux-armv7l/egg/config/cooper
copying openzwave/config/cooper/RF9505-T.xml -> build/bdist.linux-armv7l/egg/config/cooper
copying openzwave/config/cooper/RF9540-N.xml -> build/bdist.linux-armv7l/egg/config/cooper
creating build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/ltm-5.xml -> build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/lsm-15.xml -> build/bdist.linux-armv7l/egg/config/evolve
copying openzwave/config/evolve/lrm-as.xml -> build/bdist.linux-armv7l/egg/config/evolve
creating build/bdist.linux-armv7l/egg/config/zipato
copying openzwave/config/zipato/MiniKeypad.xml -> build/bdist.linux-armv7l/egg/config/zipato
copying openzwave/config/zipato/RGBBulb.xml -> build/bdist.linux-armv7l/egg/config/zipato
creating build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs411.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs412.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs312.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs314.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs311.xml -> build/bdist.linux-armv7l/egg/config/mcohome
copying openzwave/config/mcohome/mhs513.xml -> build/bdist.linux-armv7l/egg/config/mcohome
creating build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zg8101.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1602eu5.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1602eu.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zp3102.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zd2102.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zm1601eu.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zd2201.xml -> build/bdist.linux-armv7l/egg/config/vision
copying openzwave/config/vision/zs5101eu.xml -> build/bdist.linux-armv7l/egg/config/vision
creating build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/zweather.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/iTemp.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_KFOB-S.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/kfob.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06436.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WALLC-S.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WCD2.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_05431.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06433.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_064435.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_RC2.xml -> build/bdist.linux-armv7l/egg/config/zwave.me
creating build/bdist.linux-armv7l/egg/config/intermatic
copying openzwave/config/intermatic/ca8900.xml -> build/bdist.linux-armv7l/egg/config/intermatic
creating build/bdist.linux-armv7l/egg/config/honeywell
copying openzwave/config/honeywell/th8320zw1000.xml -> build/bdist.linux-armv7l/egg/config/honeywell
creating build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/rsroom.xml -> build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/living.xml -> build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/rs.xml -> build/bdist.linux-armv7l/egg/config/danfoss
copying openzwave/config/danfoss/z.xml -> build/bdist.linux-armv7l/egg/config/danfoss
creating build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z510.xml -> build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z110.xml -> build/bdist.linux-armv7l/egg/config/dlink
copying openzwave/config/dlink/dch-z120.xml -> build/bdist.linux-armv7l/egg/config/dlink
creating build/bdist.linux-armv7l/egg/config/domitech
copying openzwave/config/domitech/ze27eu.xml -> build/bdist.linux-armv7l/egg/config/domitech
copying openzwave/config/domitech/zb22uk.xml -> build/bdist.linux-armv7l/egg/config/domitech
creating build/bdist.linux-armv7l/egg/config/assa_abloy
copying openzwave/config/assa_abloy/RealLivingCapTouch.xml -> build/bdist.linux-armv7l/egg/config/assa_abloy
creating build/bdist.linux-armv7l/egg/config/waynedalton
copying openzwave/config/waynedalton/WDTC-20.xml -> build/bdist.linux-armv7l/egg/config/waynedalton
creating build/bdist.linux-armv7l/egg/config/iris
copying openzwave/config/iris/rangeextender.xml -> build/bdist.linux-armv7l/egg/config/iris
creating build/bdist.linux-armv7l/egg/config/trane
copying openzwave/config/trane/TZEMT400BB32MAA.xml -> build/bdist.linux-armv7l/egg/config/trane
copying openzwave/config/trane/TZEMT400AB32MAA.xml -> build/bdist.linux-armv7l/egg/config/trane
creating build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123580.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/solar-siren.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/zweather.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123658.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/123601.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/smoke-detector.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/009303.xml -> build/bdist.linux-armv7l/egg/config/popp
copying openzwave/config/popp/009105.xml -> build/bdist.linux-armv7l/egg/config/popp
creating build/bdist.linux-armv7l/egg/config/everspringct
copying openzwave/config/everspringct/hsm02.xml -> build/bdist.linux-armv7l/egg/config/everspringct
copying openzwave/config/device_classes.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/manufacturer_specific.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/options.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/device_configuration.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/zwscene.xsd -> build/bdist.linux-armv7l/egg/config
copying openzwave/config/zwcfg.xsd -> build/bdist.linux-armv7l/egg/config
creating build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.0-py2.7-linux-armv7l.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing libopenzwave-0.3.0-py2.7-linux-armv7l.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Extracting libopenzwave-0.3.0-py2.7-linux-armv7l.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.0 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Processing dependencies for libopenzwave==0.3.0
Searching for six==1.8.0
Best match: six 1.8.0
six 1.8.0 is already the active version in easy-install.pth
Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.0
Installation of lib finished.
python setup-api.py install
running install
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_py
creating build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-armv7l-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-armv7l-2.7/openzwave
creating build/bdist.linux-armv7l/egg
copying build/lib.linux-armv7l-2.7/libopenzwave.so -> build/bdist.linux-armv7l/egg
creating build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/__init__.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/network.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/value.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/option.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/group.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/singleton.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/scene.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/object.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/controller.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/command.py -> build/bdist.linux-armv7l/egg/openzwave
copying build/lib.linux-armv7l-2.7/openzwave/node.py -> build/bdist.linux-armv7l/egg/openzwave
byte-compiling build/bdist.linux-armv7l/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/network.py to network.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/value.py to value.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/option.py to option.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/singleton.py to singleton.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-armv7l/egg/openzwave/node.py to node.pyc
creating build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.0-py2.7.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing openzwave-0.3.0-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0-py2.7.egg
Extracting openzwave-0.3.0-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.0 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0-py2.7.egg
Processing dependencies for openzwave==0.3.0
Searching for libopenzwave==0.3.0
Best match: libopenzwave 0.3.0
Processing libopenzwave-0.3.0-py2.7-linux-armv7l.egg
libopenzwave 0.3.0 is already the active version in easy-install.pth
Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0-py2.7-linux-armv7l.egg
Searching for Louie==1.1
Best match: Louie 1.1
Louie 1.1 is already the active version in easy-install.pth
Using /usr/lib/python2.7/dist-packages
Searching for six==1.8.0
Best match: six 1.8.0
six 1.8.0 is already the active version in easy-install.pth
Using /usr/lib/python2.7/dist-packages
Searching for nose==1.3.4
Best match: nose 1.3.4
nose 1.3.4 is already the active version in easy-install.pth
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin
Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.0
Installation of API finished.
sed: can't read /etc/inittab: No such file or directoryjeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
Ne pas avoir de initab est un soucis c'est un fichier debian
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Charte du forum
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
-
totoonline
- Timide
- Messages : 55
- Inscription : 11 janv. 2016, 18:46
- Localisation : Le long de la Loire (44)
Re: dependances 2.2.6
Hélas, l'absence de l'inittab est normale: Celui-ci fait partie de sysvinit, qui a été remplacé par systemd dans Jessie.
https://www.raspberrypi.org/forums/view ... 8&t=131263 (4eme post).
https://www.raspberrypi.org/forums/view ... 8&t=131263 (4eme post).
Re: dependances 2.2.6
Roffle ça va trop vite pour moi XD
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Envoyé de mon HUAWEI GRA-L09 en utilisant Tapatalk
Charte du forum
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
Doc jeedom - Trucs et astuces
Soutiens à Slobberbone membres actif !
Non disponible par MP/Email.
Re: dependances 2.2.6
bonjour,
si je comprend bien ,pour resumer inittab n'existe pas dans l'image 2.2.6 que je possede donc impossible pour moi de valider mes dépendances.
mais jusqu'à ma reinstal cette version marchait bien il y avait un reste de fichier de la version precedente?
connaissez vous une solution pour pouvoir resoudre ce probleme ?
je risque de tout avoir a reinstaller de zero , scenario,script etc ... ?
merci
si je comprend bien ,pour resumer inittab n'existe pas dans l'image 2.2.6 que je possede donc impossible pour moi de valider mes dépendances.
mais jusqu'à ma reinstal cette version marchait bien il y avait un reste de fichier de la version precedente?
connaissez vous une solution pour pouvoir resoudre ce probleme ?
je risque de tout avoir a reinstaller de zero , scenario,script etc ... ?
merci
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
salut yanick,
je testerai :
- backup de jeedom
- récup du backup en local sur PC
- sauvegarde complète de la SD
- en ssh :
- relancer l'install des dépendances
je testerai :
- backup de jeedom
- récup du backup en local sur PC
- sauvegarde complète de la SD
- en ssh :
Code : Tout sélectionner
sudo su
apt-get update && apt-get upgradeOdroid C2 / Jeedom stable
Zwave.me UZB1 / RFXtrx433E / HEM2 / Orvibo / Connexoon / Netatmo
Synology DS1512+ / FBX6
Un grand MERCI à l'équipe Jeedom !
Zwave.me UZB1 / RFXtrx433E / HEM2 / Orvibo / Connexoon / Netatmo
Synology DS1512+ / FBX6
Un grand MERCI à l'équipe Jeedom !
Re: dependances 2.2.6
merci mutmut
jeviens de faire la manip,je relance les dépendances je coise les doigts.
choseetonante au depart quand je lance les dépendances elles passent au vert un court instant (j'y ai cru !! sniff)
verdict dans 20 min.
bon ben voila idem !!!
domage.
jeviens de faire la manip,je relance les dépendances je coise les doigts.
choseetonante au depart quand je lance les dépendances elles passent au vert un court instant (j'y ai cru !! sniff)
verdict dans 20 min.
bon ben voila idem !!!
domage.
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
@yanick la solution est donné dans l'autre discutions:
viewtopic.php?f=87&t=20327&start=60#p361105
du moins confirmé par 2. et du coup j'aurais une sorte d'explication à cause de changement sur le github openzwave qui à été fait le 15 août donc en phase avec le début des problèmes
viewtopic.php?f=87&t=20327&start=60#p361105
du moins confirmé par 2. et du coup j'aurais une sorte d'explication à cause de changement sur le github openzwave qui à été fait le 15 août donc en phase avec le début des problèmes
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Re: dependances 2.2.6
merci nechry,
suite au dépendances qui ne se faisaient pas j'ai lance une mise a jour de jeedom ( dans l'onglet mise a jour).
je suis donc passé en 2.3.17
redemarrage du RPI 2
contrôle des dépendances et la miracle elles sont OK
j'ai passe le demon en auto
test de mon module zwave OK
du coup j'ai fait toutes les mises a jours des autres mais pas celui de zwave plugin OK.
pour le moment tout marche je fait vite un backup.
mais j'ose pas lancer une maj de zwave.
suite au dépendances qui ne se faisaient pas j'ai lance une mise a jour de jeedom ( dans l'onglet mise a jour).
je suis donc passé en 2.3.17
redemarrage du RPI 2
contrôle des dépendances et la miracle elles sont OK
j'ai passe le demon en auto
test de mon module zwave OK
du coup j'ai fait toutes les mises a jours des autres mais pas celui de zwave plugin OK.
pour le moment tout marche je fait vite un backup.
mais j'ose pas lancer une maj de zwave.
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
Cette mise a jour est sorti pour corriger ce bug...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Re: dependances 2.2.6
un peu du mal a suivre tout les sujets!!
merci a tous.
du coup je peu lancer la MAJ zwave?
merci a tous.
du coup je peu lancer la MAJ zwave?
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Re: dependances 2.2.6
je répète, cette mise a jour est là pour corriger ce problème. voir le changesLog pour plus de détails
As-tu consulté la documentation avant de poser ta question?
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Les demandes de support en MP ne seront pas traité mais j'accepte les dons paypal.me/nechry
Visiter mon blog http://nechry-automation.ch/
Re: dependances 2.2.6
ok desole j'avais pas pigé !!
misea jour faite tout remarche impecable merci a tous!!
misea jour faite tout remarche impecable merci a tous!!
jeedom sur RPI 2,ipx800,serveur WES V2,ZWave plus
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 5 invités
