Je continue ma migration avec ce soir un FGD211 et franchement j'ai du mal à voir ce qui marche.
J'ai un interrupteur simple dessus j'ai donc paramétré en bistable mais cela ne fonctionne pas.
Code : Tout sélectionner
{
"data" : {
"lastReceived" : {
"updateTime" : 1408648591
},
"manufacturerId" : {
"value" : "010f"
},
"manufacturerProductId" : {
"value" : "100a"
},
"manufacturerProductType" : {
"value" : "0100"
},
"product_name" : {
"value" : "FGD211 Universal Dimmer 500W"
},
"vendorString" : {
"value" : "FIBARO System"
}
},
"instances" : {
"0" : {
"commandClasses" : {
"38" : {
"data" : {
"0" : {
"help" : "",
"name" : "Level",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"1" : {
"help" : "",
"name" : "Bright",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "False",
"value" : "False"
},
"2" : {
"help" : "",
"name" : "Dim",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "False",
"value" : "False"
},
"3" : {
"help" : "",
"name" : "Ignore Start Level",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "true",
"value" : "true"
},
"4" : {
"help" : "",
"name" : "Start Level",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"level" : {
"type" : "int",
"value" : "0"
},
"updateTime" : 1408648591
},
"name" : "COMMAND_CLASS_SWITCH_MULTILEVEL"
},
"39" : {
"data" : {
"0" : {
"help" : "",
"name" : "Switch All",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "On and Off Enabled",
"value" : "On and Off Enabled"
},
"updateTime" : 1408648591
},
"name" : "COMMAND_CLASS_SWITCH_ALL"
},
"112" : {
"data" : {
"1" : {
"help" : "Activate/Deactive ALL ON/OFF",
"name" : "Enable/Disable ALL ON/OFF",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "ALL ON active / ALL OFF active",
"value" : "ALL ON active / ALL OFF active"
},
"6" : {
"help" : "Activate/Deactivate association sending for group 1 - Note: Parameter 15 must set to 1 to work properly.",
"name" : "Separation of association sending (key 1)",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Map status to all devices in group 1 (default)",
"value" : "Map status to all devices in group 1 (default)"
},
"7" : {
"help" : "Key no.2 is not represented by any physical device except of devices on association list. This functionality prevents of lack of reaction on pressing key no.2 through polling devices from association list one by one and checking their actual statuses.",
"name" : "Control key #2 behaviour",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Device status is checked",
"value" : "Device status is checked"
},
"8" : {
"help" : "Options for changing parameter 1-99",
"name" : "Dimming step at automatic control",
"type" : "int",
"units" : "%",
"updateTime" : 1408648591,
"val" : "1",
"value" : "1"
},
"9" : {
"help" : "Options for changing parameter 1-255 (10ms - 2,5s)",
"name" : "Time of MANUALLY moving between the extreme dimming values",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "5",
"value" : "5"
},
"10" : {
"help" : "Options for changing parameter 1-255 (10ms - 2,5s) - 0: this value disables the smooth change in light intensity. NOTE: value 0 is required for inductive and capacitive devices unsuitable for dimming (e.g. fluorescent lamps, motors, etc...)",
"name" : "Time of AUTOMATIC moving between the extreme dimming values",
"type" : "int",
"units" : "ms",
"updateTime" : 1408648591,
"val" : "1",
"value" : "1"
},
"11" : {
"help" : "Options for changing parameter 1-99",
"name" : "Dimming step at manual control",
"type" : "int",
"units" : "%",
"updateTime" : 1408648591,
"val" : "1",
"value" : "1"
},
"12" : {
"help" : "Options for changing parameter 2-99",
"name" : "Maximum dimmer level control",
"type" : "int",
"units" : "%",
"updateTime" : 1408648591,
"val" : "99",
"value" : "99"
},
"13" : {
"help" : "Options for changing parameter 1-98",
"name" : "Minimum dimmer level control",
"type" : "int",
"units" : "5",
"updateTime" : 1408648591,
"val" : "2",
"value" : "2"
},
"14" : {
"help" : "Binary inputs type configuration",
"name" : "Inputs Button/Switch configuration",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Mono-stable input (button)",
"value" : "Mono-stable input (button)"
},
"15" : {
"help" : "Double-click set lighting at 100%",
"name" : "Double click option",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Enable double click",
"value" : "Enable double click"
},
"16" : {
"help" : "Saving state before power faillure",
"name" : "Saving state before power faillure",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "State saved at power failure, all outputs are set to previous state upon power restore",
"value" : "State saved at power failure, all outputs are set to previous state upon power restore"
},
"17" : {
"help" : "The function of 3-way switch provides the option to double key no. 1. The dimmer may control two bi-stable push-buttons or an infinite number of mono-stable push-buttons. (default value 0)",
"name" : "3-way switch",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Disable",
"value" : "Disable"
},
"18" : {
"help" : "The dimmer communicate the level to the associated devices. (default value 0)",
"name" : "Synchronizing light level for associated devices",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Disable",
"value" : "Disable"
},
"19" : {
"help" : "This function allow user to change [On-Off] bi-stable keys (parameter no. 14) (default value 0)",
"name" : "Change [On-Off] bi-stable keys",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Disable",
"value" : "Disable"
},
"20" : {
"help" : "This function will enable decreasing the minimum level of the Dimmer by extending the control impulse.[100 - 170] By changing the minimem level, the user may completely dim LED bulbs. Not all LED bulbs available on the market have the dimmming option. WARNING: Wrong setting of the function may cause incorrect operation of the Dimmer.",
"name" : "ADVANCED Impulse length",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "110",
"value" : "110"
},
"30" : {
"help" : "Alarm of any type (general alarm, water flooding alarm, smoke alarm: CO, CO2, temperature alarm) default value 3-alarm flashing",
"name" : "Alarm",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "ALARM FLASHING - device will turn ON and OFF periodically (see param.39)",
"value" : "ALARM FLASHING - device will turn ON and OFF periodically (see param.39)"
},
"39" : {
"help" : "Amount of time the device keeps on flashing after receipt of Alarm Frame (1ms-65535ms)",
"name" : "Active flashing alarm time",
"type" : "int",
"units" : "s",
"updateTime" : 1408648591,
"val" : "600",
"value" : "600"
},
"40" : {
"help" : "Available settings: from 1 to 99 Parameters value changes depending on the dimming level",
"name" : "Updating the dimming level without the input from the switch",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "1",
"value" : "1"
},
"41" : {
"help" : "The device offers the possibility of sending commands compatible with Command class scene activation. Information is sent to devices assigned to association group no. 3. Controllers such as Home Center 2 are able to interpret such commands and based on these commands they activate scenes, to which specific scene IDs have been assigned. The user may expand the functionality of the button connected to inputs S1 and S2 by distinguishing the actions of keys connected to those inputs. For example: double click would activate the scene goodnight and triple click would activate the scene morning.",
"name" : "Scene activation functionality",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Functionality deactivated",
"value" : "Functionality deactivated"
},
"updateTime" : 1408648591
},
"name" : "COMMAND_CLASS_CONFIGURATION"
},
"115" : {
"data" : {
"0" : {
"help" : "",
"name" : "Powerlevel",
"type" : "List",
"units" : "dB",
"updateTime" : 1408648591,
"val" : "Normal",
"value" : "Normal"
},
"1" : {
"help" : "",
"name" : "Timeout",
"type" : "int",
"units" : "seconds",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"2" : {
"help" : "",
"name" : "Set Powerlevel",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "False",
"value" : "False"
},
"3" : {
"help" : "",
"name" : "Test Node",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"4" : {
"help" : "",
"name" : "Test Powerlevel",
"type" : "List",
"units" : "dB",
"updateTime" : 1408648591,
"val" : "Normal",
"value" : "Normal"
},
"5" : {
"help" : "",
"name" : "Frame Count",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"6" : {
"help" : "",
"name" : "Test",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "False",
"value" : "False"
},
"7" : {
"help" : "",
"name" : "Report",
"type" : "bool",
"units" : "",
"updateTime" : 1408648591,
"val" : "False",
"value" : "False"
},
"8" : {
"help" : "",
"name" : "Test Status",
"type" : "List",
"units" : "",
"updateTime" : 1408648591,
"val" : "Failed",
"value" : "Failed"
},
"9" : {
"help" : "",
"name" : "Acked Frames",
"type" : "int",
"units" : "",
"updateTime" : 1408648591,
"val" : "0",
"value" : "0"
},
"updateTime" : 1408648591
},
"name" : "COMMAND_CLASS_POWERLEVEL"
},
"134" : {
"data" : {
"0" : {
"help" : "",
"name" : "Library Version",
"type" : "String",
"units" : "",
"updateTime" : 1408648591,
"val" : "3",
"value" : "3"
},
"1" : {
"help" : "",
"name" : "Protocol Version",
"type" : "String",
"units" : "",
"updateTime" : 1408648591,
"val" : "3.52",
"value" : "3.52"
},
"2" : {
"help" : "",
"name" : "Application Version",
"type" : "String",
"units" : "",
"updateTime" : 1408648591,
"val" : "2.02",
"value" : "2.02"
},
"updateTime" : 1408648591
},
"name" : "COMMAND_CLASS_VERSION"
},
"updateTime" : 1408648591
},
"updateTime" : 1408648591
},
"updateTime" : 1408648591
}
}
a ces infos:
