Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

Nouveau plugin zwave/openzwave

(anciennement dénommé plugin OpenZwave)
Golgautier
Actif
Messages : 514
Inscription : 10 avr. 2015, 10:56

Re: Nouveau plugin zwave/openzwave

Message par Golgautier » 22 juin 2015, 21:33

Doryphore a écrit : @Golgautier : je trouve que tu as beaucoup de module en orange ou rouge.....moi j'ai quasiment tout a 100% ,c'est super important
Sur la colonne "statut", je le concède, c'est pas cool. J'en ai 3, donc 2 qui sont des modules ZD2102 qui ont tendance à me gonfler. Depuis que j'ai fait un reset de ma clé ZWave, l'inclusion de ces modules a toujours été un souci, et quand ils sont inclus, ils donnent l'impression de ne jamais se réveiller. Bien reloud. J'attends une livraison pour les remplacer par des modules Zipato PSM.

Pour le orange dans la partie "Ok" je ne sais pas pourquoi je perds de paquets... Peut être la distance dans la maison entre les modules. Mais ça reste super correct je trouve (sauf pour les modules dont le statut n'est pas clean)
Jeedom en DIY
Plugins : Alarme, BBox TV, Energie, Google Agenda, Monitoring, Nabaztag, NetAtmo Station et Thermostat, Notify My Android, Pluie à 1h, PushBullet, Script, SMS, Surveillance Station, Vigilance Météo, Widget, Zwave
Liste du matériel

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:33

par contre c'est mieux avec

Code : Tout sélectionner

root@JeedomOdroid:~# apt-get install python-lxml
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
  python-lxml-dbg
The following NEW packages will be installed:
  python-lxml
0 upgraded, 1 newly installed, 0 to remove and 95 not upgraded.
Need to get 588 kB of archives.
After this operation, 1,954 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty-updates/main python-lxml armhf 3.3.3-1ubuntu0.1 [588 kB]
Fetched 588 kB in 0s (625 kB/s)
Selecting previously unselected package python-lxml.
(Reading database ... 168696 files and directories currently installed.)
Preparing to unpack .../python-lxml_3.3.3-1ubuntu0.1_armhf.deb ...
Unpacking python-lxml (3.3.3-1ubuntu0.1) ...
Setting up python-lxml (3.3.3-1ubuntu0.1) ...
mis cela n'aide pas le démon
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Golgautier
Actif
Messages : 514
Inscription : 10 avr. 2015, 10:56

Re: Nouveau plugin zwave/openzwave

Message par Golgautier » 22 juin 2015, 21:34

Edit : désolé pour le double post.
Dernière édition par Golgautier le 22 juin 2015, 21:38, édité 1 fois.
Jeedom en DIY
Plugins : Alarme, BBox TV, Energie, Google Agenda, Monitoring, Nabaztag, NetAtmo Station et Thermostat, Notify My Android, Pluie à 1h, PushBullet, Script, SMS, Surveillance Station, Vigilance Météo, Widget, Zwave
Liste du matériel

yolilef
Timide
Messages : 9
Inscription : 22 juin 2015, 21:17

Re: Nouveau plugin zwave/openzwave

Message par yolilef » 22 juin 2015, 21:37

Bonjour,

Je viens de refaire une installation propre de jeedom en repartant sur l'installation unique du plugin openzwave (j'utilisais avant la solution couplée openzwave/zwave).
Les modules Fibaro Smoke sensor (FGSS101 ) et Fibaro Motion Sensor (FGMS001) sont reconnus mais leur icône personnalisée n'apparaît plus dans la section 'Mes équipements Zwave' (cf image jointe) ... Est-ce normal ? Ai-je manqué quelque chose ? (avant, il suffisait que j'aille sur le bouton Market associé au protocole Zwave et que je télécharge le plugin associé mais je ne trouve plus ce bouton désormais sous le protocole OpenZwave) ...

Merci par avance pour votre éclairage ...

O.L.
IMG_2618.PNG
IMG_2618.PNG (92.48 Kio) Consulté 1039 fois

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:38

je viens de relancer le script d'install (ais encore une fois je n'ai pas de bouton Dev je n'ai que le stable)
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:41

négatif les gars meme une reinstall ne resoud pas le pb
voici le log de l'update

Code : Tout sélectionner

Ign http://ports.ubuntu.com trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-updates InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-backports InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-security InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Hit http://ports.ubuntu.com trusty Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Get:1 http://ports.ubuntu.com trusty-updates Release.gpg [933 B]
Get:2 http://ppa.launchpad.net trusty Release.gpg [316 B]
Hit http://ports.ubuntu.com trusty-backports Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-security Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://deb.odroid.in trusty InRelease
Hit http://ports.ubuntu.com trusty Release
Hit http://ppa.launchpad.net trusty Release.gpg
Get:3 http://ports.ubuntu.com trusty-updates Release [63.5 kB]
Hit http://ppa.launchpad.net trusty Release
Get:4 http://ppa.launchpad.net trusty Release [15.1 kB]
Hit http://deb.odroid.in trusty InRelease
Hit http://ports.ubuntu.com trusty-backports Release
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty-security Release
Hit http://ppa.launchpad.net trusty Release
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/restricted Sources
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/universe Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/restricted armhf Packages
Hit http://ports.ubuntu.com trusty/universe armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en
Get:5 http://ppa.launchpad.net trusty/main Sources [22.1 kB]
Hit http://deb.odroid.in trusty/main armhf Packages
Get:6 http://ppa.launchpad.net trusty/main armhf Packages [10.1 kB]
Hit http://ports.ubuntu.com trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty/restricted Translation-en
Get:7 http://ppa.launchpad.net trusty/main Translation-en [16.2 kB]
Hit http://ports.ubuntu.com trusty/restricted Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/universe Translation-en
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/universe Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Translation-en
Get:8 http://ports.ubuntu.com trusty-updates/main Sources [210 kB]
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Get:9 http://ports.ubuntu.com trusty-updates/restricted Sources [3433 B]
Get:10 http://ports.ubuntu.com trusty-updates/universe Sources [121 kB]
Get:11 http://ports.ubuntu.com trusty-updates/main armhf Packages [497 kB]
Get:12 http://ports.ubuntu.com trusty-updates/restricted armhf Packages [28 B]
Get:13 http://ports.ubuntu.com trusty-updates/universe armhf Packages [285 kB]
Hit http://ports.ubuntu.com trusty-updates/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Translation-en
Hit http://ports.ubuntu.com trusty-updates/universe Translation-en
Hit http://ports.ubuntu.com trusty-backports/main Sources
Hit http://ports.ubuntu.com trusty-backports/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/main armhf Packages
Hit http://ports.ubuntu.com trusty-backports/restricted armhf Packages
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-backports/main Translation-en
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/main Sources
Hit http://ports.ubuntu.com trusty-security/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-security/universe Sources
Hit http://ports.ubuntu.com trusty-security/multiverse Sources
Hit http://ports.ubuntu.com trusty-security/main armhf Packages
Hit http://ports.ubuntu.com trusty-security/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-security/universe armhf Packages
Hit http://ports.ubuntu.com trusty-security/multiverse armhf Packages
Hit http://ports.ubuntu.com trusty-security/main Translation-en
Hit http://ports.ubuntu.com trusty-security/multiverse Translation-en
Hit http://ports.ubuntu.com trusty-security/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/universe Translation-en
Fetched 1246 kB in 22s (55.9 kB/s)
Reading package lists...
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
mercurial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-louie is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-sphinx is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
make is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
libudev-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
g++ is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-lxml is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Installation des dependances Python
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-blockdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-actdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-nwdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-seqdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): urwid in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): Werkzeug>=0.7 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): Jinja2>=2.4 in /usr/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): itsdangerous>=0.21 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): markupsafe in /usr/lib/python2.7/dist-packages (from Jinja2>=2.4->flask)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask-restful in /usr/local/lib/python2.7/dist-packages
Cleaning up...
mkdir: cannot create directory '/opt': File exists
Sauvegarde du fichier de conf
Désinstallation de la version précédente
rm -rf _build
find . -name *.pyc -delete
cd openzwave && make clean
make[1]: Entering directory `/opt/python-openzwave/openzwave'
make -C /opt/python-openzwave/openzwave/cpp/build/ -w clean
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/build'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/build'
make -C /opt/python-openzwave/openzwave/cpp/examples/MinOZW/ -w clean
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory `/opt/python-openzwave/openzwave'
python setup-lib.py clean
running clean
removing 'build/temp.linux-armv7l-2.7' (and everything under it)
python setup-api.py clean
running clean
rm -Rf build/
rm lib/libopenzwave.cpp
rm -Rf python_openzwave_api.egg-info/
rm -Rf python_openzwave_lib.egg-info/
rm -Rf /usr/local/lib/python*.*/dist-packages/python-openzwave*
rm -Rf /usr/local/lib/python*.*/dist-packages/pyozwman*
rm -Rf /usr/local/lib/python*.*/dist-packages/openzwave*
rm -Rf /usr/local/share/python-openzwave
Installation de Python-OpenZwave
Cloning into 'python-openzwave'...
HEAD is now at 808b070 Auto-commit for docs
Uninstalling Cython:
  Successfully uninstalled Cython
apt-get install -y cython
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  cython
0 upgraded, 1 newly installed, 0 to remove and 95 not upgraded.
Need to get 1279 kB of archives.
After this operation, 5403 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty/main cython armhf 0.20.1+git90-g0e6e38e-1ubuntu2 [1279 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 1279 kB in 1s (750 kB/s)
Selecting previously unselected package cython.
(Reading database ... 168774 files and directories currently installed.)
Preparing to unpack .../cython_0.20.1+git90-g0e6e38e-1ubuntu2_armhf.deb ...
Unpacking cython (0.20.1+git90-g0e6e38e-1ubuntu2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
E: Sub-process /usr/bin/dpkg received a segmentation fault.
make: *** [cython-deps] Error 100
Cloning into 'openzwave'...
error: inflate: data stream error (incorrect data check)
fatal: serious inflate inconsistency
fatal: index-pack failed
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 101: cd: openzwave: No such file or directory
fatal: Could not parse object '5f03981324a2ad601f6837c2c1e9ad9cee94dac0'.
sed: can't read openzwave/cpp/src/value_classes/ValueID.h: No such file or directory
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 106: cd: openzwave: No such file or directory
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-armv7l-2.7
creating build/temp.linux-armv7l-2.7/src-lib
creating build/temp.linux-armv7l-2.7/src-lib/libopenzwave
arm-linux-gnueabihf-gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-armv7l-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:361:18: fatal error: Node.h: No such file or directory
 #include "Node.h"
                  ^
compilation terminated.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
make: *** [install-api] Error 1
Everything is successfully installed!
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
Croixamus
Actif
Messages : 521
Inscription : 28 nov. 2014, 15:43
Localisation : 56

Re: Nouveau plugin zwave/openzwave

Message par Croixamus » 22 juin 2015, 21:45

Bonjour,
je viens de migrer en OpenZwave sur mon PC portable avec mon raZberry connecté via un USB UART TTL/RS232 et ca fonctionne du 1er coup :D

Mon seul soucis est ma sirène FortrezZ SSA2 qui est crée de façon bizarre.
Normalement, elle fonctionne selon un dimmer avec :
0% : OFF
De 1 à 33 % : Uniquement des Flashs lumineux
de 33 à 66% : Uniquement la sirène
de 66 à 100% : Flashs lumineux + sirène
et là, j'ai ca ?
openzwave_ssa2.png
openzwave_ssa2.png (43.94 Kio) Consulté 1041 fois
Cdt,
JEEDOM sur VM Debian avec RFXcom/Téléinfo GCE/raZberry en USB-TTL
Esxi6 avec VM Jeedom / VM MotionEye / VM OpenMediaVault / VM OpenVPN-AS

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 21:47

oui car aucune conf n'a encore été faite donc il t'a ajouté tout ce que le système trouvait en auto detection.
Normalement le slider level 0 doit te permettre de régler ta sirène sur le même principe non ?
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 21:49

carfnann a écrit :négatif les gars meme une reinstall ne resoud pas le pb
voici le log de l'update

Code : Tout sélectionner

Ign http://ports.ubuntu.com trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-updates InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-backports InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-security InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Hit http://ports.ubuntu.com trusty Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Get:1 http://ports.ubuntu.com trusty-updates Release.gpg [933 B]
Get:2 http://ppa.launchpad.net trusty Release.gpg [316 B]
Hit http://ports.ubuntu.com trusty-backports Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-security Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://deb.odroid.in trusty InRelease
Hit http://ports.ubuntu.com trusty Release
Hit http://ppa.launchpad.net trusty Release.gpg
Get:3 http://ports.ubuntu.com trusty-updates Release [63.5 kB]
Hit http://ppa.launchpad.net trusty Release
Get:4 http://ppa.launchpad.net trusty Release [15.1 kB]
Hit http://deb.odroid.in trusty InRelease
Hit http://ports.ubuntu.com trusty-backports Release
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty-security Release
Hit http://ppa.launchpad.net trusty Release
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/restricted Sources
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/universe Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/restricted armhf Packages
Hit http://ports.ubuntu.com trusty/universe armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en
Get:5 http://ppa.launchpad.net trusty/main Sources [22.1 kB]
Hit http://deb.odroid.in trusty/main armhf Packages
Get:6 http://ppa.launchpad.net trusty/main armhf Packages [10.1 kB]
Hit http://ports.ubuntu.com trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty/restricted Translation-en
Get:7 http://ppa.launchpad.net trusty/main Translation-en [16.2 kB]
Hit http://ports.ubuntu.com trusty/restricted Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/universe Translation-en
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/universe Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Translation-en
Get:8 http://ports.ubuntu.com trusty-updates/main Sources [210 kB]
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Get:9 http://ports.ubuntu.com trusty-updates/restricted Sources [3433 B]
Get:10 http://ports.ubuntu.com trusty-updates/universe Sources [121 kB]
Get:11 http://ports.ubuntu.com trusty-updates/main armhf Packages [497 kB]
Get:12 http://ports.ubuntu.com trusty-updates/restricted armhf Packages [28 B]
Get:13 http://ports.ubuntu.com trusty-updates/universe armhf Packages [285 kB]
Hit http://ports.ubuntu.com trusty-updates/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Translation-en
Hit http://ports.ubuntu.com trusty-updates/universe Translation-en
Hit http://ports.ubuntu.com trusty-backports/main Sources
Hit http://ports.ubuntu.com trusty-backports/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/main armhf Packages
Hit http://ports.ubuntu.com trusty-backports/restricted armhf Packages
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-backports/main Translation-en
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/main Sources
Hit http://ports.ubuntu.com trusty-security/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-security/universe Sources
Hit http://ports.ubuntu.com trusty-security/multiverse Sources
Hit http://ports.ubuntu.com trusty-security/main armhf Packages
Hit http://ports.ubuntu.com trusty-security/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-security/universe armhf Packages
Hit http://ports.ubuntu.com trusty-security/multiverse armhf Packages
Hit http://ports.ubuntu.com trusty-security/main Translation-en
Hit http://ports.ubuntu.com trusty-security/multiverse Translation-en
Hit http://ports.ubuntu.com trusty-security/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/universe Translation-en
Fetched 1246 kB in 22s (55.9 kB/s)
Reading package lists...
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
mercurial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-louie is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-sphinx is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
make is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
libudev-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
g++ is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-lxml is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Installation des dependances Python
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-blockdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-actdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-nwdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-seqdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): urwid in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): Werkzeug>=0.7 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): Jinja2>=2.4 in /usr/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): itsdangerous>=0.21 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): markupsafe in /usr/lib/python2.7/dist-packages (from Jinja2>=2.4->flask)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask-restful in /usr/local/lib/python2.7/dist-packages
Cleaning up...
mkdir: cannot create directory '/opt': File exists
Sauvegarde du fichier de conf
Désinstallation de la version précédente
rm -rf _build
find . -name *.pyc -delete
cd openzwave && make clean
make[1]: Entering directory `/opt/python-openzwave/openzwave'
make -C /opt/python-openzwave/openzwave/cpp/build/ -w clean
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/build'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/build'
make -C /opt/python-openzwave/openzwave/cpp/examples/MinOZW/ -w clean
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Entering directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[2]: Leaving directory `/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory `/opt/python-openzwave/openzwave'
python setup-lib.py clean
running clean
removing 'build/temp.linux-armv7l-2.7' (and everything under it)
python setup-api.py clean
running clean
rm -Rf build/
rm lib/libopenzwave.cpp
rm -Rf python_openzwave_api.egg-info/
rm -Rf python_openzwave_lib.egg-info/
rm -Rf /usr/local/lib/python*.*/dist-packages/python-openzwave*
rm -Rf /usr/local/lib/python*.*/dist-packages/pyozwman*
rm -Rf /usr/local/lib/python*.*/dist-packages/openzwave*
rm -Rf /usr/local/share/python-openzwave
Installation de Python-OpenZwave
Cloning into 'python-openzwave'...
HEAD is now at 808b070 Auto-commit for docs
Uninstalling Cython:
  Successfully uninstalled Cython
apt-get install -y cython
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  cython
0 upgraded, 1 newly installed, 0 to remove and 95 not upgraded.
Need to get 1279 kB of archives.
After this operation, 5403 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com/ubuntu-ports/ trusty/main cython armhf 0.20.1+git90-g0e6e38e-1ubuntu2 [1279 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 1279 kB in 1s (750 kB/s)
Selecting previously unselected package cython.
(Reading database ... 168774 files and directories currently installed.)
Preparing to unpack .../cython_0.20.1+git90-g0e6e38e-1ubuntu2_armhf.deb ...
Unpacking cython (0.20.1+git90-g0e6e38e-1ubuntu2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
E: Sub-process /usr/bin/dpkg received a segmentation fault.
make: *** [cython-deps] Error 100
Cloning into 'openzwave'...
error: inflate: data stream error (incorrect data check)
fatal: serious inflate inconsistency
fatal: index-pack failed
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 101: cd: openzwave: No such file or directory
fatal: Could not parse object '5f03981324a2ad601f6837c2c1e9ad9cee94dac0'.
sed: can't read openzwave/cpp/src/value_classes/ValueID.h: No such file or directory
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 106: cd: openzwave: No such file or directory
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-armv7l-2.7
creating build/temp.linux-armv7l-2.7/src-lib
creating build/temp.linux-armv7l-2.7/src-lib/libopenzwave
arm-linux-gnueabihf-gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-armv7l-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:361:18: fatal error: Node.h: No such file or directory
 #include "Node.h"
                  ^
compilation terminated.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
make: *** [install-api] Error 1
Everything is successfully installed!
Tu as un soucis sur ton install linux.
Que te donne la commande : sudo apt-get install -y cython ?
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:51

voila

Code : Tout sélectionner

root@JeedomOdroid:~# sudo apt-get install -y cython
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
root@JeedomOdroid:~# sudo dpkg --configure -a
Setting up cython (0.20.1+git90-g0e6e38e-1ubuntu2) ...
root@JeedomOdroid:~#  sudo apt-get install -y cython
Reading package lists... Done
Building dependency tree
Reading state information... Done
cython is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
root@JeedomOdroid:~#
normal?
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 21:53

et si tu relances l'install maintenant ?
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:54

en cours d'install, bizarre pourquoi cela a fontionné dans la version precedente?
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 21:59

pas mieux :(

Code : Tout sélectionner

Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-updates InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-backports InRelease
Hit http://deb.odroid.in trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-security InRelease
Ign http://ppa.launchpad.net trusty InRelease
Hit http://ports.ubuntu.com trusty Release.gpg
Hit http://deb.odroid.in trusty InRelease
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-updates Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-backports Release.gpg
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-security Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty Release
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-updates Release
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty-backports Release
Hit http://ports.ubuntu.com trusty-security Release
Hit http://ppa.launchpad.net trusty Release
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/main Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/restricted Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/universe Sources
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/restricted armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/universe armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/restricted Translation-en
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/restricted Translation-en_AU
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/universe Translation-en
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/universe Translation-en_AU
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/main Sources
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/universe Sources
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-updates/universe armhf Packages
Hit http://ports.ubuntu.com trusty-updates/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Translation-en
Hit http://ports.ubuntu.com trusty-updates/universe Translation-en
Hit http://ports.ubuntu.com trusty-backports/main Sources
Hit http://ports.ubuntu.com trusty-backports/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/main armhf Packages
Hit http://ports.ubuntu.com trusty-backports/restricted armhf Packages
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-backports/main Translation-en
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/restricted Translation-en
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-security/main Sources
Hit http://ports.ubuntu.com trusty-security/restricted Sources
Hit http://ports.ubuntu.com trusty-security/universe Sources
Hit http://ports.ubuntu.com trusty-security/multiverse Sources
Hit http://ports.ubuntu.com trusty-security/main armhf Packages
Hit http://ports.ubuntu.com trusty-security/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-security/universe armhf Packages
Hit http://ports.ubuntu.com trusty-security/multiverse armhf Packages
Hit http://ports.ubuntu.com trusty-security/main Translation-en
Hit http://ports.ubuntu.com trusty-security/multiverse Translation-en
Hit http://ports.ubuntu.com trusty-security/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/universe Translation-en
Reading package lists...
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
mercurial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-louie is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-sphinx is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
make is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
libudev-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
g++ is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-lxml is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Installation des dependances Python
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-blockdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-actdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-nwdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-seqdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): urwid in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): Werkzeug>=0.7 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): Jinja2>=2.4 in /usr/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): itsdangerous>=0.21 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): markupsafe in /usr/lib/python2.7/dist-packages (from Jinja2>=2.4->flask)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask-restful in /usr/local/lib/python2.7/dist-packages
Cleaning up...
mkdir: cannot create directory '/opt': File exists
Sauvegarde du fichier de conf
Désinstallation de la version précédente
rm -rf build
rm -rf dists
yes | pip uninstall python-openzwave-lib
Cannot uninstall requirement python-openzwave-lib, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall python-openzwave-api
Cannot uninstall requirement python-openzwave-api, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall libopenzwave
Cannot uninstall requirement libopenzwave, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall openzwave
Cannot uninstall requirement openzwave, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall pyozwman
Cannot uninstall requirement pyozwman, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall pyozwweb
Cannot uninstall requirement pyozwweb, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
python setup-lib.py develop --uninstall
running develop
python setup-api.py develop --uninstall
running develop
python setup-manager.py develop --uninstall
make: *** [uninstall] Segmentation fault
Installation de Python-OpenZwave
Cloning into 'python-openzwave'...
HEAD is now at 808b070 Auto-commit for docs
Uninstalling Cython:
  Successfully uninstalled Cython
apt-get install -y cython
Reading package lists...
Building dependency tree...
Reading state information...
cython is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Cloning into 'openzwave'...
error: inflate: data stream error (incorrect data check)
fatal: pack has bad object at offset 4417617: inflate returned -3
fatal: index-pack failed
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 101: cd: openzwave: No such file or directory
fatal: Could not parse object '5f03981324a2ad601f6837c2c1e9ad9cee94dac0'.
sed: can't read openzwave/cpp/src/value_classes/ValueID.h: No such file or directory
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 106: cd: openzwave: No such file or directory
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
Traceback (most recent call last):
  File "setup-lib.py", line 122, in <module>
    packages = find_packages('src-lib', exclude=["scripts"]),
  File "/usr/lib/python2.7/distutils/core.py", line 151, in setup
    dist.run_commands()
  File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
    self.run_command(cmd)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install.py", line 73, in run
    self.do_egg_install()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install.py", line 88, in do_egg_install
    self.run_command('bdist_egg')
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/bdist_egg.py", line 185, in run
    cmd = self.call_command('install_lib', warn_dir=0)
  File "/usr/lib/python2.7/dist-packages/setuptools/command/bdist_egg.py", line 171, in call_command
    self.run_command(cmdname)
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install_lib.py", line 21, in run
    self.build()
  File "/usr/lib/python2.7/distutils/command/install_lib.py", line 111, in build
    self.run_command('build_ext')
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 163, in run
    _build_ext.build_ext.run(self)
  File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run
    self.build_extensions()
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 170, in build_extensions
    ext.sources = self.cython_sources(ext.sources, ext)
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 319, in cython_sources
    full_module_name=module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 606, in compile
    return compile_single(source, options, full_module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 559, in compile_single
    return run_pipeline(source, options, full_module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 430, in run_pipeline
    pipeline = Pipeline.create_pyx_pipeline(context, options, result)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Pipeline.py", line 238, in create_pyx_pipeline
    create_pipeline(context, mode, exclude_classes=exclude_classes),
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Pipeline.py", line 131, in create_pipeline
    from ParseTreeTransforms import WithTransform, NormalizeTree, PostParse, PxdPostParse
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/ParseTreeTransforms.py", line 1394, in <module>
    class AnalyseDeclarationsTransform(EnvTransform):
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/ParseTreeTransforms.py", line 1402, in AnalyseDeclarationsTransform
    """, level='c_class', pipeline=[NormalizeTree(None)])
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/TreeFragment.py", line 209, in __init__
    mod = t = parse_from_strings(name, fmt_code, fmt_pxds, level=level, initial_pos=initial_pos)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/TreeFragment.py", line 67, in parse_from_strings
    scope = scope, context = context, initial_pos = initial_pos)
  File "Scanning.py", line 283, in Cython.Compiler.Scanning.PyrexScanner.__init__ (Cython/Compiler/Scanning.c:7175)
  File "Scanning.py", line 32, in Cython.Compiler.Scanning.get_lexicon (Cython/Compiler/Scanning.c:2136)
  File "Lexicon.py", line 66, in Cython.Compiler.Lexicon.make_lexicon (Cython/Compiler/Lexicon.c:3360)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Lexicons.py", line 132, in __init__
    nfa, default_initial_state, spec, token_number)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Lexicons.py", line 176, in add_token_to_machine
    match_bol = 1, nocase = 0)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 326, in build_machine
    re.build_machine(m, s1, s2, match_bol, nocase)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 367, in build_machine
    re.build_machine(m, initial_state, final_state, 0, nocase)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 386, in build_machine
make: *** [install-api] Error 1
Everything is successfully installed!
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 22:09

carfnann a écrit :pas mieux :(

Code : Tout sélectionner

Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-updates InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-backports InRelease
Hit http://deb.odroid.in trusty InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ports.ubuntu.com trusty-security InRelease
Ign http://ppa.launchpad.net trusty InRelease
Hit http://ports.ubuntu.com trusty Release.gpg
Hit http://deb.odroid.in trusty InRelease
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-updates Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-backports Release.gpg
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-security Release.gpg
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty Release
Hit http://ppa.launchpad.net trusty Release.gpg
Hit http://ports.ubuntu.com trusty-updates Release
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty-backports Release
Hit http://ports.ubuntu.com trusty-security Release
Hit http://ppa.launchpad.net trusty Release
Hit http://deb.odroid.in trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/main Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/restricted Sources
Hit http://ppa.launchpad.net trusty Release
Hit http://ports.ubuntu.com trusty/universe Sources
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/main armhf Packages
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/restricted armhf Packages
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/universe armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/main Translation-en_AU
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/restricted Translation-en
Hit http://ppa.launchpad.net trusty/main Sources
Hit http://ports.ubuntu.com trusty/restricted Translation-en_AU
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty/universe Translation-en
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty/universe Translation-en_AU
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/main Sources
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Sources
Hit http://ppa.launchpad.net trusty/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/universe Sources
Hit http://ppa.launchpad.net trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/main armhf Packages
Hit http://ports.ubuntu.com trusty-updates/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-updates/universe armhf Packages
Hit http://ports.ubuntu.com trusty-updates/main Translation-en
Hit http://ports.ubuntu.com trusty-updates/restricted Translation-en
Hit http://ports.ubuntu.com trusty-updates/universe Translation-en
Hit http://ports.ubuntu.com trusty-backports/main Sources
Hit http://ports.ubuntu.com trusty-backports/restricted Sources
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/main armhf Packages
Hit http://ports.ubuntu.com trusty-backports/restricted armhf Packages
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-backports/main Translation-en
Ign http://deb.odroid.in trusty/main Translation-en
Hit http://ports.ubuntu.com trusty-backports/restricted Translation-en
Ign http://deb.odroid.in trusty/main Translation-en_AU
Hit http://ports.ubuntu.com trusty-security/main Sources
Hit http://ports.ubuntu.com trusty-security/restricted Sources
Hit http://ports.ubuntu.com trusty-security/universe Sources
Hit http://ports.ubuntu.com trusty-security/multiverse Sources
Hit http://ports.ubuntu.com trusty-security/main armhf Packages
Hit http://ports.ubuntu.com trusty-security/restricted armhf Packages
Hit http://ports.ubuntu.com trusty-security/universe armhf Packages
Hit http://ports.ubuntu.com trusty-security/multiverse armhf Packages
Hit http://ports.ubuntu.com trusty-security/main Translation-en
Hit http://ports.ubuntu.com trusty-security/multiverse Translation-en
Hit http://ports.ubuntu.com trusty-security/restricted Translation-en
Hit http://ports.ubuntu.com trusty-security/universe Translation-en
Reading package lists...
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
mercurial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-louie is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-sphinx is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
make is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
libudev-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
g++ is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-lxml is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Installation des dependances Python
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-blockdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-actdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-nwdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): sphinxcontrib-seqdiag in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): urwid in /usr/local/lib/python2.7/dist-packages
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use --upgrade to upgrade): Werkzeug>=0.7 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): Jinja2>=2.4 in /usr/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): itsdangerous>=0.21 in /usr/local/lib/python2.7/dist-packages (from flask)
Requirement already satisfied (use --upgrade to upgrade): markupsafe in /usr/lib/python2.7/dist-packages (from Jinja2>=2.4->flask)
Cleaning up...
Requirement already satisfied (use --upgrade to upgrade): flask-restful in /usr/local/lib/python2.7/dist-packages
Cleaning up...
mkdir: cannot create directory '/opt': File exists
Sauvegarde du fichier de conf
Désinstallation de la version précédente
rm -rf build
rm -rf dists
yes | pip uninstall python-openzwave-lib
Cannot uninstall requirement python-openzwave-lib, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall python-openzwave-api
Cannot uninstall requirement python-openzwave-api, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall libopenzwave
Cannot uninstall requirement libopenzwave, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall openzwave
Cannot uninstall requirement openzwave, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall pyozwman
Cannot uninstall requirement pyozwman, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
yes | pip uninstall pyozwweb
Cannot uninstall requirement pyozwweb, not installed
Storing debug log for failure in /var/www/.pip/pip.log
yes: standard output: Broken pipe
yes: write error
make: [uninstall] Error 1 (ignored)
python setup-lib.py develop --uninstall
running develop
python setup-api.py develop --uninstall
running develop
python setup-manager.py develop --uninstall
make: *** [uninstall] Segmentation fault
Installation de Python-OpenZwave
Cloning into 'python-openzwave'...
HEAD is now at 808b070 Auto-commit for docs
Uninstalling Cython:
  Successfully uninstalled Cython
apt-get install -y cython
Reading package lists...
Building dependency tree...
Reading state information...
cython is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 95 not upgraded.
Cloning into 'openzwave'...
error: inflate: data stream error (incorrect data check)
fatal: pack has bad object at offset 4417617: inflate returned -3
fatal: index-pack failed
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 101: cd: openzwave: No such file or directory
fatal: Could not parse object '5f03981324a2ad601f6837c2c1e9ad9cee94dac0'.
sed: can't read openzwave/cpp/src/value_classes/ValueID.h: No such file or directory
/usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../ressources/install.sh: line 106: cd: openzwave: No such file or directory
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
Traceback (most recent call last):
  File "setup-lib.py", line 122, in <module>
    packages = find_packages('src-lib', exclude=["scripts"]),
  File "/usr/lib/python2.7/distutils/core.py", line 151, in setup
    dist.run_commands()
  File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
    self.run_command(cmd)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install.py", line 73, in run
    self.do_egg_install()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install.py", line 88, in do_egg_install
    self.run_command('bdist_egg')
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/bdist_egg.py", line 185, in run
    cmd = self.call_command('install_lib', warn_dir=0)
  File "/usr/lib/python2.7/dist-packages/setuptools/command/bdist_egg.py", line 171, in call_command
    self.run_command(cmdname)
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/setuptools/command/install_lib.py", line 21, in run
    self.build()
  File "/usr/lib/python2.7/distutils/command/install_lib.py", line 111, in build
    self.run_command('build_ext')
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 163, in run
    _build_ext.build_ext.run(self)
  File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run
    self.build_extensions()
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 170, in build_extensions
    ext.sources = self.cython_sources(ext.sources, ext)
  File "/usr/lib/python2.7/dist-packages/Cython/Distutils/build_ext.py", line 319, in cython_sources
    full_module_name=module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 606, in compile
    return compile_single(source, options, full_module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 559, in compile_single
    return run_pipeline(source, options, full_module_name)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Main.py", line 430, in run_pipeline
    pipeline = Pipeline.create_pyx_pipeline(context, options, result)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Pipeline.py", line 238, in create_pyx_pipeline
    create_pipeline(context, mode, exclude_classes=exclude_classes),
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/Pipeline.py", line 131, in create_pipeline
    from ParseTreeTransforms import WithTransform, NormalizeTree, PostParse, PxdPostParse
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/ParseTreeTransforms.py", line 1394, in <module>
    class AnalyseDeclarationsTransform(EnvTransform):
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/ParseTreeTransforms.py", line 1402, in AnalyseDeclarationsTransform
    """, level='c_class', pipeline=[NormalizeTree(None)])
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/TreeFragment.py", line 209, in __init__
    mod = t = parse_from_strings(name, fmt_code, fmt_pxds, level=level, initial_pos=initial_pos)
  File "/usr/lib/python2.7/dist-packages/Cython/Compiler/TreeFragment.py", line 67, in parse_from_strings
    scope = scope, context = context, initial_pos = initial_pos)
  File "Scanning.py", line 283, in Cython.Compiler.Scanning.PyrexScanner.__init__ (Cython/Compiler/Scanning.c:7175)
  File "Scanning.py", line 32, in Cython.Compiler.Scanning.get_lexicon (Cython/Compiler/Scanning.c:2136)
  File "Lexicon.py", line 66, in Cython.Compiler.Lexicon.make_lexicon (Cython/Compiler/Lexicon.c:3360)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Lexicons.py", line 132, in __init__
    nfa, default_initial_state, spec, token_number)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Lexicons.py", line 176, in add_token_to_machine
    match_bol = 1, nocase = 0)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 326, in build_machine
    re.build_machine(m, s1, s2, match_bol, nocase)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 367, in build_machine
    re.build_machine(m, initial_state, final_state, 0, nocase)
  File "/usr/lib/python2.7/dist-packages/Cython/Plex/Regexps.py", line 386, in build_machine
make: *** [install-api] Error 1
Everything is successfully installed!
il a des soucis pour copier openzwave depuis github, c'est bizarre.
tu es sur que ton disque n'est pas plein ?
Peux-tu lancer ces commandes une par une pour voir s'il y a une erreur :

Code : Tout sélectionner

cd /opt/python-openzwave
sudo git clone git://github.com/OpenZWave/open-zwave.git openzwave
cd openzwave
sudo git reset --hard 5f03981324a2ad601f6837c2c1e9ad9cee94dac0
cd /opt/python-openzwave
sudo sed -i '253s/.*//' openzwave/cpp/src/value_classes/ValueID.h
cd openzwave && sudo make
cd /opt/python-openzwave
sudo make install-api
sudo mkdir /opt/python-openzwave/python-eggs
sudo cp /opt/zwcfg* /opt/python-openzwave/.
sudo chown -R www-data:www-data /opt/python-openzwave
sudo chmod -R 777 /opt/python-openzwave
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
Croixamus
Actif
Messages : 521
Inscription : 28 nov. 2014, 15:43
Localisation : 56

Re: Nouveau plugin zwave/openzwave

Message par Croixamus » 22 juin 2015, 22:12

tmartinez a écrit :Normalement le slider level 0 doit te permettre de régler ta sirène sur le même principe non ?
Ok, je vais essayé. Si je créé ces 4 commandes uniquement, ca va fonctionner ?

All OFF -> data[0].Set(0)
Flash -> data[0].Set(30)
Sirène -> data[0].Set(60)
All ON -> data[0].Set(99)

0% : OFF
De 1 à 33 % : Uniquement des Flashs lumineux
de 33 à 66% : Uniquement la sirène
de 66 à 100% : Flashs lumineux + sirène
Cdt,
JEEDOM sur VM Debian avec RFXcom/Téléinfo GCE/raZberry en USB-TTL
Esxi6 avec VM Jeedom / VM MotionEye / VM OpenMediaVault / VM OpenVPN-AS

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 22:16

déjà à la 2eme ligne ca plante...

Code : Tout sélectionner

root@JeedomOdroid:~# cd /opt/python-openzwave
root@JeedomOdroid:/opt/python-openzwave# sudo git clone git://github.com/OpenZWave/open-zwave.git openzwave
Cloning into 'openzwave'...
remote: Counting objects: 12727, done.
remote: Compressing objects: 100% (60/60), done.
error: inflate: data stream error (incorrect data check) KiB/s    
fatal: pack has bad object at offset 36278859: inflate returned -3
fatal: index-pack failed
root@JeedomOdroid:/opt/python-openzwave# 
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 22:18

Croixamus a écrit :
tmartinez a écrit :Normalement le slider level 0 doit te permettre de régler ta sirène sur le même principe non ?
Ok, je vais essayé. Si je créé ces 4 commandes uniquement, ca va fonctionner ?

All OFF -> data[0].Set(0)
Flash -> data[0].Set(30)
Sirène -> data[0].Set(60)
All ON -> data[0].Set(99)

0% : OFF
De 1 à 33 % : Uniquement des Flashs lumineux
de 33 à 66% : Uniquement la sirène
de 66 à 100% : Flashs lumineux + sirène
Cdt,
Oui ça devrait être bon
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
tmartinez
Modérateur
Messages : 1226
Inscription : 08 juil. 2014, 11:22
Localisation : Limonest

Re: Nouveau plugin zwave/openzwave

Message par tmartinez » 22 juin 2015, 22:22

carfnann a écrit :déjà à la 2eme ligne ca plante...

Code : Tout sélectionner

root@JeedomOdroid:~# cd /opt/python-openzwave
root@JeedomOdroid:/opt/python-openzwave# sudo git clone git://github.com/OpenZWave/open-zwave.git openzwave
Cloning into 'openzwave'...
remote: Counting objects: 12727, done.
remote: Compressing objects: 100% (60/60), done.
error: inflate: data stream error (incorrect data check) KiB/s    
fatal: pack has bad object at offset 36278859: inflate returned -3
fatal: index-pack failed
root@JeedomOdroid:/opt/python-openzwave# 
Es-tu sur de ne pas avoir des pbs de connexions internet ou de disque plein (que te donne la commande : sudo df -h ?)
Car je viens de faire la même commande sur ma machine et tout est ok :

Code : Tout sélectionner

Clonage dans 'openzwave'...
remote: Counting objects: 12727, done.
remote: Compressing objects: 100% (60/60), done.
remote: Total 12727 (delta 28), reused 0 (delta 0), pack-reused 12667
Réception d'objets: 100% (12727/12727), 99.23 MiB | 7.28 MiB/s, fait.
Résolution des deltas: 100% (9716/9716), fait.
Vérification de la connectivité... fait.
Jeedom sous Proxmox
43 Modules Z-Wave / 1x RfxCom / 20 devices connectés
Mon matériel

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 22:25

suis à 35% d'utilisation

Code : Tout sélectionner

root@JeedomOdroid:/opt/python-openzwave# sudo df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/mmcblk0p2   15G  4.6G  9.2G  34% /
none            4.0K     0  4.0K   0% /sys/fs/cgroup
udev            419M  4.0K  419M   1% /dev
tmpfs           424M   24K  424M   1% /tmp
tmpfs            85M  2.6M   83M   4% /run
none            5.0M     0  5.0M   0% /run/lock
none            424M   76K  424M   1% /run/shm
none            100M   28K  100M   1% /run/user
/dev/mmcblk0p1  129M  7.3M  122M   6% /media/boot
j'ai retenté la cmd maintenant j'ai :

Code : Tout sélectionner

root@JeedomOdroid:/opt/python-openzwave# sudo git clone git://github.com/OpenZWave/open-zwave.git openzwave
Cloning into 'openzwave'...
remote: Counting objects: 12727, done.
remote: Compressing objects: 100% (60/60), done.
remote: Total 12727 (delta 28), reused 0 (delta 0), pack-reused 12667
Receiving objects: 100% (12727/12727), 99.23 MiB | 588.00 KiB/s, done.
error: inflate: data stream error (incorrect data check)
fatal: serious inflate inconsistency
fatal: index-pack failed
c'est strange, je suis en train de mater gameone alors j'ai internet...
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Avatar de l’utilisateur
carfnann
Timide
Messages : 469
Inscription : 05 févr. 2015, 02:14
Contact :

Re: Nouveau plugin zwave/openzwave

Message par carfnann » 22 juin 2015, 22:25

suis à 35% d'utilisation

Code : Tout sélectionner

root@JeedomOdroid:/opt/python-openzwave# sudo df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/mmcblk0p2   15G  4.6G  9.2G  34% /
none            4.0K     0  4.0K   0% /sys/fs/cgroup
udev            419M  4.0K  419M   1% /dev
tmpfs           424M   24K  424M   1% /tmp
tmpfs            85M  2.6M   83M   4% /run
none            5.0M     0  5.0M   0% /run/lock
none            424M   76K  424M   1% /run/shm
none            100M   28K  100M   1% /run/user
/dev/mmcblk0p1  129M  7.3M  122M   6% /media/boot
j'ai retenté la cmd maintenant j'ai :

Code : Tout sélectionner

root@JeedomOdroid:/opt/python-openzwave# sudo git clone git://github.com/OpenZWave/open-zwave.git openzwave
Cloning into 'openzwave'...
remote: Counting objects: 12727, done.
remote: Compressing objects: 100% (60/60), done.
remote: Total 12727 (delta 28), reused 0 (delta 0), pack-reused 12667
Receiving objects: 100% (12727/12727), 99.23 MiB | 588.00 KiB/s, done.
error: inflate: data stream error (incorrect data check)
fatal: serious inflate inconsistency
fatal: index-pack failed
c'est strange, je suis en train de mater gameone alors j'ai internet...
JEEdom sous Proxmox (Intel Quad Core i7-4770S / 3.10Ghz - 16 Go DDR3 - 256 Go SSD) + RFXCom + Jeedom sous Odroid avec Aeon Gen5
Mon matériel

Mon Blog : http://www.ca-sert-a-quoi.com domotique, objet connecté et impression 3D

Répondre

Revenir vers « Plugin Z-Wave »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 13 invités