Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
A très bientôt !
A très bientôt !
Mise à jour RFXCOM, enOcean, Edisio
Re: Mise à jour RFXCOM, enOcean, Edisio
Euh, moi ça remarche depuis que j'ai réactivé tous mes objets rfxcom qui étaient tous désactivés après la mise à jour de ce matin.
Re: Mise à jour RFXCOM, enOcean, Edisio
A c'est possible si tu as mis tu timeout sur les équipements
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
Non, j'ai pas de timeout pourtant.
Re: Mise à jour RFXCOM, enOcean, Edisio
De délai entre 2 messages ?
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
Non, sur aucun équipement.
Re: Mise à jour RFXCOM, enOcean, Edisio
Bizarre je vois pas pourquoi il les a desactivé alors, tu as pas eu d'alerte ?
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
Non, par contre la maj du rfxcom n'avait pas été prise en compte lors de mon 1er essai hier matin et là, j'avais un message d'erreur indiquant que cette maj avait plantée.
Re: Mise à jour RFXCOM, enOcean, Edisio
- conf_reseau.png (49.41 Kio) Consulté 1223 fois
2015-05-20 10:09:30,997 - MainThread - rfxcmd:3168 - DEBUG - Python version: 2.7.3
2015-05-20 10:09:30,997 - MainThread - rfxcmd:3169 - DEBUG - RFXCMD Version: 0.3 (734)
2015-05-20 10:09:30,998 - MainThread - rfxcmd:3170 - DEBUG - Date: 2014-08-27 18:37:06 +0200 (Wed, 27 Aug 2014)
2015-05-20 10:09:30,998 - MainThread - rfxcmd:3174 - DEBUG - Configfile: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:30,998 - MainThread - rfxcmd:3175 - DEBUG - Read configuration file
2015-05-20 10:09:30,998 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:30,999 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:30,999 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,002 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_active
2015-05-20 10:09:31,003 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_active>yes</serial_active>
2015-05-20 10:09:31,003 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 10:09:31,003 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,004 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,004 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,004 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,007 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_device
2015-05-20 10:09:31,007 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_device>/dev/ttyUSB0</serial_device>
2015-05-20 10:09:31,008 - MainThread - rfxcmd:2641 - DEBUG - --> /dev/ttyUSB0
2015-05-20 10:09:31,008 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,008 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,008 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,009 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,011 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_rate
2015-05-20 10:09:31,012 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_rate>38400</serial_rate>
2015-05-20 10:09:31,012 - MainThread - rfxcmd:2641 - DEBUG - --> 38400
2015-05-20 10:09:31,013 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,013 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,013 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,014 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,020 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_timeout
2015-05-20 10:09:31,021 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_timeout>9</serial_timeout>
2015-05-20 10:09:31,021 - MainThread - rfxcmd:2641 - DEBUG - --> 9
2015-05-20 10:09:31,021 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,022 - MainThread - rfxcmd:2917 - DEBUG - Serial device: /dev/ttyUSB0
2015-05-20 10:09:31,022 - MainThread - rfxcmd:2918 - DEBUG - Serial rate: 38400
2015-05-20 10:09:31,022 - MainThread - rfxcmd:2919 - DEBUG - Serial timeout: 9
2015-05-20 10:09:31,022 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,023 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,023 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,025 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: trigger
2015-05-20 10:09:31,026 - MainThread - rfxcmd:2639 - DEBUG - Found: <trigger>/tmp/rfxcom_remote.sh</trigger>
2015-05-20 10:09:31,026 - MainThread - rfxcmd:2641 - DEBUG - --> /tmp/rfxcom_remote.sh
2015-05-20 10:09:31,027 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,027 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,027 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,028 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,030 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: trigger_timeout
2015-05-20 10:09:31,031 - MainThread - rfxcmd:2639 - DEBUG - Found: <trigger_timeout>10</trigger_timeout>
2015-05-20 10:09:31,031 - MainThread - rfxcmd:2641 - DEBUG - --> 10
2015-05-20 10:09:31,031 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,031 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,032 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,032 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,035 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: sockethost
2015-05-20 10:09:31,036 - MainThread - rfxcmd:2639 - DEBUG - Found: <sockethost>127.0.0.1</sockethost>
2015-05-20 10:09:31,036 - MainThread - rfxcmd:2641 - DEBUG - --> 127.0.0.1
2015-05-20 10:09:31,036 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,037 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,037 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,037 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,040 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: socketport
2015-05-20 10:09:31,040 - MainThread - rfxcmd:2639 - DEBUG - Found: <socketport>55000</socketport>
2015-05-20 10:09:31,041 - MainThread - rfxcmd:2641 - DEBUG - --> 55000
2015-05-20 10:09:31,041 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,041 - MainThread - rfxcmd:2932 - DEBUG - SocketServer: True
2015-05-20 10:09:31,042 - MainThread - rfxcmd:2933 - DEBUG - SocketHost: 127.0.0.1
2015-05-20 10:09:31,042 - MainThread - rfxcmd:2934 - DEBUG - SocketPort: 55000
2015-05-20 10:09:31,042 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,042 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,043 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,045 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: daemon_active
2015-05-20 10:09:31,046 - MainThread - rfxcmd:2639 - DEBUG - Found: <daemon_active>yes</daemon_active>
2015-05-20 10:09:31,046 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 10:09:31,046 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,047 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,047 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,047 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,050 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: daemon_pidfile
2015-05-20 10:09:31,050 - MainThread - rfxcmd:2639 - DEBUG - Found: <daemon_pidfile>/tmp/rfxcom.pid</daemon_pidfile>
2015-05-20 10:09:31,051 - MainThread - rfxcmd:2641 - DEBUG - --> /tmp/rfxcom.pid
2015-05-20 10:09:31,051 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,051 - MainThread - rfxcmd:2943 - DEBUG - Daemon_active: True
2015-05-20 10:09:31,051 - MainThread - rfxcmd:2944 - DEBUG - Daemon_pidfile: /tmp/rfxcom.pid
2015-05-20 10:09:31,052 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,052 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,052 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,055 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: barometric
2015-05-20 10:09:31,056 - MainThread - rfxcmd:2639 - DEBUG - Found: <barometric>0</barometric>
2015-05-20 10:09:31,057 - MainThread - rfxcmd:2641 - DEBUG - --> 0
2015-05-20 10:09:31,057 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,057 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,057 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,058 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,060 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: log_msg
2015-05-20 10:09:31,061 - MainThread - rfxcmd:2639 - DEBUG - Found: <log_msg>yes</log_msg>
2015-05-20 10:09:31,061 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 10:09:31,061 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,062 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,062 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,062 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,065 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: log_msgfile
2015-05-20 10:09:31,065 - MainThread - rfxcmd:2639 - DEBUG - Found: <log_msgfile>/usr/share/nginx/www/jeedom/core/class/../../log/rfxcmd.message</log_msgfile>
2015-05-20 10:09:31,066 - MainThread - rfxcmd:2641 - DEBUG - --> /usr/share/nginx/www/jeedom/core/class/../../log/rfxcmd.message
2015-05-20 10:09:31,066 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,066 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,066 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,067 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,070 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: process_repeat_message
2015-05-20 10:09:31,071 - MainThread - rfxcmd:2639 - DEBUG - Found: <process_repeat_message>no</process_repeat_message>
2015-05-20 10:09:31,071 - MainThread - rfxcmd:2641 - DEBUG - --> no
2015-05-20 10:09:31,071 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,071 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,072 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,072 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,074 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: repeat_message_time
2015-05-20 10:09:31,075 - MainThread - rfxcmd:2639 - DEBUG - Found: <repeat_message_time>599999940</repeat_message_time>
2015-05-20 10:09:31,076 - MainThread - rfxcmd:2641 - DEBUG - --> 599999940
2015-05-20 10:09:31,076 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,076 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,076 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,077 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,079 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: protocol_startup
2015-05-20 10:09:31,080 - MainThread - rfxcmd:2639 - DEBUG - Found: <protocol_startup>yes</protocol_startup>
2015-05-20 10:09:31,080 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 10:09:31,080 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,081 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 10:09:31,081 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 10:09:31,081 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 10:09:31,084 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: protocol_file
2015-05-20 10:09:31,085 - MainThread - rfxcmd:2639 - DEBUG - Found: <protocol_file>/usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml</protocol_file>
2015-05-20 10:09:31,086 - MainThread - rfxcmd:2641 - DEBUG - --> /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml
2015-05-20 10:09:31,086 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 10:09:31,086 - MainThread - rfxcmd:3199 - DEBUG - Daemon
2015-05-20 10:09:31,086 - MainThread - rfxcmd:3200 - DEBUG - Check PID file
2015-05-20 10:09:31,087 - MainThread - rfxcmd:3205 - DEBUG - PID file '/tmp/rfxcom.pid'
2015-05-20 10:09:31,087 - MainThread - rfxcmd:3213 - DEBUG - PID file does not exists
2015-05-20 10:09:31,087 - MainThread - rfxcmd:3221 - DEBUG - Check platform
2015-05-20 10:09:31,087 - MainThread - rfxcmd:3228 - DEBUG - Platform: linux2
2015-05-20 10:09:31,088 - MainThread - rfxcmd:3231 - DEBUG - Write PID file
2015-05-20 10:09:31,088 - MainThread - rfxcmd:3238 - DEBUG - Start daemon
2015-05-20 10:09:31,098 - MainThread - rfxcmd:278 - DEBUG - Writing PID 23478 to /tmp/rfxcom.pid
2015-05-20 10:09:31,100 - MainThread - rfxcmd:2719 - DEBUG - Start listening...
2015-05-20 10:09:31,101 - MainThread - rfxcmd:2722 - DEBUG - Open serial port
2015-05-20 10:09:31,101 - MainThread - rfxcmd:2989 - DEBUG - Serial extension version: 2.5
2015-05-20 10:09:31,102 - MainThread - rfxcmd:2998 - DEBUG - Device: /dev/ttyUSB0
2015-05-20 10:09:31,102 - MainThread - rfxcmd:3006 - DEBUG - Open Serialport
2015-05-20 10:09:31,143 - Thread-1 - rfx_socket:69 - DEBUG - LoopNetServer Thread started
2015-05-20 10:09:31,144 - MainThread - rfxcmd:2734 - DEBUG - Socket interface started
2015-05-20 10:09:31,144 - Thread-1 - rfx_socket:70 - DEBUG - Listening on: [127.0.0.1:55000]
2015-05-20 10:09:31,144 - MainThread - rfxcmd:2740 - DEBUG - Serialport flush output
2015-05-20 10:09:31,145 - MainThread - rfxcmd:2742 - DEBUG - Serialport flush input
2015-05-20 10:09:31,145 - MainThread - rfxcmd:2746 - DEBUG - Send rfxcmd_reset (0d00000000000000000000000000)
2015-05-20 10:09:31,146 - MainThread - rfxcmd:2748 - DEBUG - Sleep 1 sec
2015-05-20 10:09:32,148 - MainThread - rfxcmd:2752 - DEBUG - Serialport flush output
2015-05-20 10:09:32,148 - MainThread - rfxcmd:2754 - DEBUG - Serialport flush input
2015-05-20 10:09:32,149 - MainThread - rfxcmd:2758 - DEBUG - Send rfxcmd_status (0d00000002000000000000000000)
2015-05-20 10:09:32,149 - MainThread - rfxcmd:2760 - DEBUG - Sleep 1 sec
2015-05-20 10:09:33,151 - MainThread - rfxcmd:2765 - DEBUG - Protocol AutoStart activated
2015-05-20 10:09:33,152 - MainThread - rfx_protocols:112 - DEBUG - Open protocol file and read it, file: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml
2015-05-20 10:09:33,164 - MainThread - rfx_protocols:115 - DEBUG - XML file OK
2015-05-20 10:09:33,166 - MainThread - rfx_protocols:126 - DEBUG - Read protocol tags in file
2015-05-20 10:09:33,167 - MainThread - rfx_protocols:161 - DEBUG - Id: 0, State: 0, Counter: 0, Name: Undecoded
2015-05-20 10:09:33,168 - MainThread - rfx_protocols:161 - DEBUG - Id: 1, State: 1, Counter: 1, Name: RFU
2015-05-20 10:09:33,168 - MainThread - rfx_protocols:161 - DEBUG - Id: 2, State: 1, Counter: 2, Name: Byron SX
2015-05-20 10:09:33,169 - MainThread - rfx_protocols:161 - DEBUG - Id: 3, State: 0, Counter: 3, Name: RSL
2015-05-20 10:09:33,170 - MainThread - rfx_protocols:161 - DEBUG - Id: 4, State: 1, Counter: 4, Name: Lightning4
2015-05-20 10:09:33,171 - MainThread - rfx_protocols:161 - DEBUG - Id: 5, State: 0, Counter: 5, Name: FineOffset / Viking
2015-05-20 10:09:33,171 - MainThread - rfx_protocols:161 - DEBUG - Id: 6, State: 0, Counter: 6, Name: Rubicson
2015-05-20 10:09:33,172 - MainThread - rfx_protocols:161 - DEBUG - Id: 7, State: 1, Counter: 7, Name: AE Blyss
2015-05-20 10:09:33,173 - MainThread - rfx_protocols:161 - DEBUG - Id: 8, State: 0, Counter: 8, Name: Blinds T1/T2/T3/T4
2015-05-20 10:09:33,173 - MainThread - rfx_protocols:161 - DEBUG - Id: 9, State: 0, Counter: 9, Name: Blinds T0
2015-05-20 10:09:33,174 - MainThread - rfx_protocols:161 - DEBUG - Id: 10, State: 0, Counter: 10, Name: ProGuard
2015-05-20 10:09:33,174 - MainThread - rfx_protocols:161 - DEBUG - Id: 11, State: 0, Counter: 11, Name: FS20
2015-05-20 10:09:33,175 - MainThread - rfx_protocols:161 - DEBUG - Id: 12, State: 1, Counter: 12, Name: La Crosse
2015-05-20 10:09:33,175 - MainThread - rfx_protocols:161 - DEBUG - Id: 13, State: 1, Counter: 13, Name: Hideki / UPM
2015-05-20 10:09:33,175 - MainThread - rfx_protocols:161 - DEBUG - Id: 14, State: 1, Counter: 14, Name: AD Lightwave RF
2015-05-20 10:09:33,176 - MainThread - rfx_protocols:161 - DEBUG - Id: 15, State: 0, Counter: 15, Name: Mertik
2015-05-20 10:09:33,176 - MainThread - rfx_protocols:161 - DEBUG - Id: 16, State: 0, Counter: 16, Name: Visonic
2015-05-20 10:09:33,177 - MainThread - rfx_protocols:161 - DEBUG - Id: 17, State: 0, Counter: 17, Name: ATI
2015-05-20 10:09:33,177 - MainThread - rfx_protocols:161 - DEBUG - Id: 18, State: 1, Counter: 18, Name: Oregon Scientific
2015-05-20 10:09:33,177 - MainThread - rfx_protocols:161 - DEBUG - Id: 19, State: 0, Counter: 19, Name: Meiantech
2015-05-20 10:09:33,178 - MainThread - rfx_protocols:161 - DEBUG - Id: 20, State: 1, Counter: 20, Name: HomeEasy EU
2015-05-20 10:09:33,178 - MainThread - rfx_protocols:161 - DEBUG - Id: 21, State: 1, Counter: 21, Name: AC
2015-05-20 10:09:33,179 - MainThread - rfx_protocols:161 - DEBUG - Id: 22, State: 1, Counter: 22, Name: ARC
2015-05-20 10:09:33,179 - MainThread - rfx_protocols:161 - DEBUG - Id: 23, State: 1, Counter: 23, Name: X10
2015-05-20 10:09:33,179 - MainThread - rfx_protocols:165 - DEBUG - Tags total: 24
2015-05-20 10:09:33,180 - MainThread - rfx_protocols:172 - DEBUG - All tags found
2015-05-20 10:09:33,180 - MainThread - rfx_protocols:193 - DEBUG - msg3: [0, 1, 1, 0, 1, 0, 0, 1] / 69
2015-05-20 10:09:33,180 - MainThread - rfx_protocols:194 - DEBUG - msg4: [0, 0, 0, 0, 1, 1, 1, 0] / 0e
2015-05-20 10:09:33,180 - MainThread - rfx_protocols:195 - DEBUG - msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
2015-05-20 10:09:33,181 - MainThread - rfx_protocols:198 - DEBUG - Command: 0D000000035300690E2F00000000
2015-05-20 10:09:33,181 - MainThread - rfxcmd:2768 - DEBUG - Send set protocol message (0D000000035300690e2f00000000)
2015-05-20 10:09:33,181 - MainThread - rfxcmd:2770 - DEBUG - Sleep 1 sec
2015-05-20 10:09:34,233 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 10:09:34
2015-05-20 10:09:34,234 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 28
2015-05-20 10:09:34,234 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0D
2015-05-20 10:09:34,236 - MainThread - rfxcmd:2582 - DEBUG - Message: 0D 01 00 00 02 53 E8 69 0E 2D 01 02 00 00
2015-05-20 10:09:34,236 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0D 01 00 00 02 53 E8 69 0E 2D 01 02 00 00
2015-05-20 10:09:34,237 - MainThread - rfxcmd:330 - DEBUG - PacketType: 01
2015-05-20 10:09:34,238 - MainThread - rfxcmd:334 - DEBUG - SubType: 00
2015-05-20 10:09:34,238 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 10:09:34,239 - MainThread - rfxcmd:342 - DEBUG - Id1: 02
2015-05-20 10:09:34,239 - MainThread - rfxcmd:346 - DEBUG - Id2: 53
2015-05-20 10:09:34,240 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 10:09:34,240 - MainThread - rfxcmd:566 - DEBUG - Decode packetType 0x01 - Start
2015-05-20 10:09:34,241 - MainThread - rfxcmd:759 - DEBUG - Decode packetType 0x01 - End
2015-05-20 10:09:34,242 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
2015-05-20 10:09:34,243 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0D0100000253E8690E2D01020000
2015-05-20 10:09:34,294 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 10:09:34
2015-05-20 10:09:34,295 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 14
2015-05-20 10:09:34,295 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0D
2015-05-20 10:09:34,297 - MainThread - rfxcmd:2582 - DEBUG - Message: 0D 01 00 00 03 53 E8 69 0E 2D 01 02 00 00
2015-05-20 10:09:34,298 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0D 01 00 00 03 53 E8 69 0E 2D 01 02 00 00
2015-05-20 10:09:34,300 - MainThread - rfxcmd:330 - DEBUG - PacketType: 01
2015-05-20 10:09:34,301 - MainThread - rfxcmd:334 - DEBUG - SubType: 00
2015-05-20 10:09:34,302 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 10:09:34,302 - MainThread - rfxcmd:342 - DEBUG - Id1: 03
2015-05-20 10:09:34,303 - MainThread - rfxcmd:346 - DEBUG - Id2: 53
2015-05-20 10:09:34,303 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 10:09:34,304 - MainThread - rfxcmd:566 - DEBUG - Decode packetType 0x01 - Start
2015-05-20 10:09:34,306 - MainThread - rfxcmd:759 - DEBUG - Decode packetType 0x01 - End
2015-05-20 10:09:34,307 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
2015-05-20 10:09:34,308 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0D0100000353E8690E2D01020000
2015-05-20 10:10:09,273 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 10:10:09
2015-05-20 10:10:09,274 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 10:10:09,275 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 10:10:09,277 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 07 00 2A 0E 00 C5 3D 01 79
2015-05-20 10:10:09,277 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 07 00 2A 0E 00 C5 3D 01 79
2015-05-20 10:10:09,278 - MainThread - rfxcmd:330 - DEBUG - PacketType: 52
2015-05-20 10:10:09,279 - MainThread - rfxcmd:334 - DEBUG - SubType: 07
2015-05-20 10:10:09,279 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 10:10:09,280 - MainThread - rfxcmd:342 - DEBUG - Id1: 2A
2015-05-20 10:10:09,280 - MainThread - rfxcmd:346 - DEBUG - Id2: 0E
2015-05-20 10:10:09,280 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 10:10:09,281 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 10:10:09,283 - Thread-2 - rfx_command:51 - DEBUG - Thread started, timeout = 10, command : /tmp/rfxcom_remote.sh packettype=52 subtype=07 id=2A0E temperature=19.7 humidity=61 signal=7 battery=9
2015-05-20 10:10:09,284 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 10:10:09,286 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = TFA TS34C, Cresta
Seqnbr = 00
Id = 2A0E
Temperature = 19.7 C
Humidity = 61%
Humidity Status = Comfort
Battery = 9
Signal level = 7
2015-05-20 10:10:09,290 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A5207002A0E00C53D0179
2015-05-20 10:10:09,553 - Thread-2 - rfx_command:54 - DEBUG - Return code: 0
2015-05-20 10:10:09,554 - Thread-2 - rfx_command:55 - DEBUG - Thread finished
2015-05-20 10:10:52,114 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 10:10:52
2015-05-20 10:10:52,114 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 10:10:52,115 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 10:10:52,116 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 07 01 2A 0E 00 C5 3D 01 79
2015-05-20 10:10:52,117 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 07 01 2A 0E 00 C5 3D 01 79
2015-05-20 10:10:52,118 - MainThread - rfxcmd:330 - DEBUG - PacketType: 52
2015-05-20 10:10:52,118 - MainThread - rfxcmd:334 - DEBUG - SubType: 07
2015-05-20 10:10:52,119 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 01
2015-05-20 10:10:52,119 - MainThread - rfxcmd:342 - DEBUG - Id1: 2A
2015-05-20 10:10:52,119 - MainThread - rfxcmd:346 - DEBUG - Id2: 0E
2015-05-20 10:10:52,120 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 10:10:52,120 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 10:10:52,121 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 10:10:52,122 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = TFA TS34C, Cresta
Seqnbr = 01
Id = 2A0E
Temperature = 19.7 C
Humidity = 61%
Humidity Status = Comfort
Battery = 9
Signal level = 7
Time between message = 43
2015-05-20 10:10:52,122 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A5207012A0E00C53D0179
je ne peux pas voir cat /tmp/rfxcom_remote.sh car blocage reseau
je suis en 1.188.0 au niveau de jeedom et
rfxcom 2015-05-19 18:11:55 2015-05-19 18:11:55
est ce que cela parait normal ?
Re: Mise à jour RFXCOM, enOcean, Edisio
Si quand tu vas sur jeedom tu met /jeedom dans l'url oui la conf est bonne
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
C'est OK j'ai bien ma sonde qui remonte.
Par contre est ce que les autres objets comme ma télécommande va se créer automatiquement comme avant des que j aurais appuyé dessus ?
Par contre est ce que les autres objets comme ma télécommande va se créer automatiquement comme avant des que j aurais appuyé dessus ?
Re: Mise à jour RFXCOM, enOcean, Edisio
Oui
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
A mon tour je n'ai pas les remontés de mes capteurs de températures et humidite
Code : Tout sélectionner
2015-05-20 17:16:20,470 - MainThread - rfxcmd:3168 - DEBUG - Python version: 2.7.3
2015-05-20 17:16:20,473 - MainThread - rfxcmd:3169 - DEBUG - RFXCMD Version: 0.3 (734)
2015-05-20 17:16:20,487 - MainThread - rfxcmd:3170 - DEBUG - Date: 2014-08-27 18:37:06 +0200 (Wed, 27 Aug 2014)
2015-05-20 17:16:20,488 - MainThread - rfxcmd:3174 - DEBUG - Configfile: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:20,498 - MainThread - rfxcmd:3175 - DEBUG - Read configuration file
2015-05-20 17:16:20,507 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:20,511 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:20,513 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:20,605 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_active
2015-05-20 17:16:20,619 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_active>yes</serial_active>
2015-05-20 17:16:20,622 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 17:16:20,635 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:20,648 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:20,655 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:20,663 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:20,725 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_device
2015-05-20 17:16:20,740 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_device>/dev/ttyUSB1</serial_device>
2015-05-20 17:16:20,750 - MainThread - rfxcmd:2641 - DEBUG - --> /dev/ttyUSB1
2015-05-20 17:16:20,752 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:20,753 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:20,755 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:20,775 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:20,836 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_rate
2015-05-20 17:16:20,860 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_rate>38400</serial_rate>
2015-05-20 17:16:20,866 - MainThread - rfxcmd:2641 - DEBUG - --> 38400
2015-05-20 17:16:20,867 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:20,874 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:20,875 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:20,890 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,017 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: serial_timeout
2015-05-20 17:16:21,041 - MainThread - rfxcmd:2639 - DEBUG - Found: <serial_timeout>9</serial_timeout>
2015-05-20 17:16:21,057 - MainThread - rfxcmd:2641 - DEBUG - --> 9
2015-05-20 17:16:21,066 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,068 - MainThread - rfxcmd:2917 - DEBUG - Serial device: /dev/ttyUSB1
2015-05-20 17:16:21,074 - MainThread - rfxcmd:2918 - DEBUG - Serial rate: 38400
2015-05-20 17:16:21,076 - MainThread - rfxcmd:2919 - DEBUG - Serial timeout: 9
2015-05-20 17:16:21,086 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,100 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,102 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,167 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: trigger
2015-05-20 17:16:21,184 - MainThread - rfxcmd:2639 - DEBUG - Found: <trigger>/tmp/rfxcom_remote.sh</trigger>
2015-05-20 17:16:21,192 - MainThread - rfxcmd:2641 - DEBUG - --> /tmp/rfxcom_remote.sh
2015-05-20 17:16:21,209 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,218 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,221 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,224 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,291 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: trigger_timeout
2015-05-20 17:16:21,309 - MainThread - rfxcmd:2639 - DEBUG - Found: <trigger_timeout>10</trigger_timeout>
2015-05-20 17:16:21,317 - MainThread - rfxcmd:2641 - DEBUG - --> 10
2015-05-20 17:16:21,329 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,335 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,337 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,347 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,433 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: sockethost
2015-05-20 17:16:21,458 - MainThread - rfxcmd:2639 - DEBUG - Found: <sockethost>127.0.0.1</sockethost>
2015-05-20 17:16:21,461 - MainThread - rfxcmd:2641 - DEBUG - --> 127.0.0.1
2015-05-20 17:16:21,463 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,464 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,487 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,498 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,576 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: socketport
2015-05-20 17:16:21,583 - MainThread - rfxcmd:2639 - DEBUG - Found: <socketport>55000</socketport>
2015-05-20 17:16:21,601 - MainThread - rfxcmd:2641 - DEBUG - --> 55000
2015-05-20 17:16:21,603 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,604 - MainThread - rfxcmd:2932 - DEBUG - SocketServer: True
2015-05-20 17:16:21,606 - MainThread - rfxcmd:2933 - DEBUG - SocketHost: 127.0.0.1
2015-05-20 17:16:21,624 - MainThread - rfxcmd:2934 - DEBUG - SocketPort: 55000
2015-05-20 17:16:21,625 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,636 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,649 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,707 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: daemon_active
2015-05-20 17:16:21,722 - MainThread - rfxcmd:2639 - DEBUG - Found: <daemon_active>yes</daemon_active>
2015-05-20 17:16:21,724 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 17:16:21,726 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,740 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,747 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,754 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,824 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: daemon_pidfile
2015-05-20 17:16:21,839 - MainThread - rfxcmd:2639 - DEBUG - Found: <daemon_pidfile>/tmp/rfxcom.pid</daemon_pidfile>
2015-05-20 17:16:21,847 - MainThread - rfxcmd:2641 - DEBUG - --> /tmp/rfxcom.pid
2015-05-20 17:16:21,857 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:21,865 - MainThread - rfxcmd:2943 - DEBUG - Daemon_active: True
2015-05-20 17:16:21,867 - MainThread - rfxcmd:2944 - DEBUG - Daemon_pidfile: /tmp/rfxcom.pid
2015-05-20 17:16:21,877 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:21,879 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:21,888 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:21,992 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: barometric
2015-05-20 17:16:22,023 - MainThread - rfxcmd:2639 - DEBUG - Found: <barometric>0</barometric>
2015-05-20 17:16:22,025 - MainThread - rfxcmd:2641 - DEBUG - --> 0
2015-05-20 17:16:22,027 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,032 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,034 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,051 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,131 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: log_msg
2015-05-20 17:16:22,148 - MainThread - rfxcmd:2639 - DEBUG - Found: <log_msg>yes</log_msg>
2015-05-20 17:16:22,161 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 17:16:22,163 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,173 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,190 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,193 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,272 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: log_msgfile
2015-05-20 17:16:22,301 - MainThread - rfxcmd:2639 - DEBUG - Found: <log_msgfile>/usr/share/nginx/www/jeedom/core/class/../../log/rfxcmd.message</log_msgfile>
2015-05-20 17:16:22,303 - MainThread - rfxcmd:2641 - DEBUG - --> /usr/share/nginx/www/jeedom/core/class/../../log/rfxcmd.message
2015-05-20 17:16:22,305 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,319 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,322 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,331 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,406 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: process_repeat_message
2015-05-20 17:16:22,429 - MainThread - rfxcmd:2639 - DEBUG - Found: <process_repeat_message>no</process_repeat_message>
2015-05-20 17:16:22,431 - MainThread - rfxcmd:2641 - DEBUG - --> no
2015-05-20 17:16:22,433 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,451 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,453 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,462 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,513 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: repeat_message_time
2015-05-20 17:16:22,533 - MainThread - rfxcmd:2639 - DEBUG - Found: <repeat_message_time>599999940</repeat_message_time>
2015-05-20 17:16:22,535 - MainThread - rfxcmd:2641 - DEBUG - --> 599999940
2015-05-20 17:16:22,560 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,561 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,563 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,586 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,644 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: protocol_startup
2015-05-20 17:16:22,670 - MainThread - rfxcmd:2639 - DEBUG - Found: <protocol_startup>yes</protocol_startup>
2015-05-20 17:16:22,674 - MainThread - rfxcmd:2641 - DEBUG - --> yes
2015-05-20 17:16:22,676 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,683 - MainThread - rfxcmd:2616 - DEBUG - Open configuration file
2015-05-20 17:16:22,692 - MainThread - rfxcmd:2617 - DEBUG - File: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/config.xml
2015-05-20 17:16:22,703 - MainThread - rfxcmd:2627 - DEBUG - Parse config XML data
2015-05-20 17:16:22,777 - MainThread - rfxcmd:2635 - DEBUG - Get the configuration item: protocol_file
2015-05-20 17:16:22,800 - MainThread - rfxcmd:2639 - DEBUG - Found: <protocol_file>/usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml</protocol_file>
2015-05-20 17:16:22,802 - MainThread - rfxcmd:2641 - DEBUG - --> /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml
2015-05-20 17:16:22,817 - MainThread - rfxcmd:2646 - DEBUG - Return
2015-05-20 17:16:22,827 - MainThread - rfxcmd:3199 - DEBUG - Daemon
2015-05-20 17:16:22,830 - MainThread - rfxcmd:3200 - DEBUG - Check PID file
2015-05-20 17:16:22,838 - MainThread - rfxcmd:3205 - DEBUG - PID file '/tmp/rfxcom.pid'
2015-05-20 17:16:22,849 - MainThread - rfxcmd:3213 - DEBUG - PID file does not exists
2015-05-20 17:16:22,901 - MainThread - rfxcmd:3221 - DEBUG - Check platform
2015-05-20 17:16:22,903 - MainThread - rfxcmd:3228 - DEBUG - Platform: linux2
2015-05-20 17:16:22,904 - MainThread - rfxcmd:3231 - DEBUG - Write PID file
2015-05-20 17:16:22,928 - MainThread - rfxcmd:3238 - DEBUG - Start daemon
2015-05-20 17:16:23,001 - MainThread - rfxcmd:278 - DEBUG - Writing PID 30092 to /tmp/rfxcom.pid
2015-05-20 17:16:23,100 - MainThread - rfxcmd:2719 - DEBUG - Start listening...
2015-05-20 17:16:23,108 - MainThread - rfxcmd:2722 - DEBUG - Open serial port
2015-05-20 17:16:23,113 - MainThread - rfxcmd:2989 - DEBUG - Serial extension version: 2.5
2015-05-20 17:16:23,115 - MainThread - rfxcmd:2998 - DEBUG - Device: /dev/ttyUSB1
2015-05-20 17:16:23,179 - MainThread - rfxcmd:3006 - DEBUG - Open Serialport
2015-05-20 17:16:24,337 - MainThread - rfxcmd:2734 - DEBUG - Socket interface started
2015-05-20 17:16:24,337 - Thread-1 - rfx_socket:69 - DEBUG - LoopNetServer Thread started
2015-05-20 17:16:24,360 - Thread-1 - rfx_socket:70 - DEBUG - Listening on: [127.0.0.1:55000]
2015-05-20 17:16:24,375 - MainThread - rfxcmd:2740 - DEBUG - Serialport flush output
2015-05-20 17:16:24,399 - MainThread - rfxcmd:2742 - DEBUG - Serialport flush input
2015-05-20 17:16:24,412 - MainThread - rfxcmd:2746 - DEBUG - Send rfxcmd_reset (0d00000000000000000000000000)
2015-05-20 17:16:24,450 - MainThread - rfxcmd:2748 - DEBUG - Sleep 1 sec
2015-05-20 17:16:25,454 - MainThread - rfxcmd:2752 - DEBUG - Serialport flush output
2015-05-20 17:16:25,456 - MainThread - rfxcmd:2754 - DEBUG - Serialport flush input
2015-05-20 17:16:25,459 - MainThread - rfxcmd:2758 - DEBUG - Send rfxcmd_status (0d00000002000000000000000000)
2015-05-20 17:16:25,476 - MainThread - rfxcmd:2760 - DEBUG - Sleep 1 sec
2015-05-20 17:16:26,481 - MainThread - rfxcmd:2765 - DEBUG - Protocol AutoStart activated
2015-05-20 17:16:26,484 - MainThread - rfx_protocols:112 - DEBUG - Open protocol file and read it, file: /usr/share/nginx/www/jeedom/plugins/rfxcom/ressources/rfxcmd/protocol.xml
2015-05-20 17:16:26,747 - MainThread - rfx_protocols:115 - DEBUG - XML file OK
2015-05-20 17:16:26,798 - MainThread - rfx_protocols:126 - DEBUG - Read protocol tags in file
2015-05-20 17:16:26,804 - MainThread - rfx_protocols:161 - DEBUG - Id: 0, State: 0, Counter: 0, Name: Undecoded
2015-05-20 17:16:26,857 - MainThread - rfx_protocols:161 - DEBUG - Id: 1, State: 0, Counter: 1, Name: RFU
2015-05-20 17:16:26,880 - MainThread - rfx_protocols:161 - DEBUG - Id: 2, State: 0, Counter: 2, Name: Byron SX
2015-05-20 17:16:26,903 - MainThread - rfx_protocols:161 - DEBUG - Id: 3, State: 0, Counter: 3, Name: RSL
2015-05-20 17:16:26,928 - MainThread - rfx_protocols:161 - DEBUG - Id: 4, State: 0, Counter: 4, Name: Lightning4
2015-05-20 17:16:26,946 - MainThread - rfx_protocols:161 - DEBUG - Id: 5, State: 0, Counter: 5, Name: FineOffset / Viking
2015-05-20 17:16:26,972 - MainThread - rfx_protocols:161 - DEBUG - Id: 6, State: 0, Counter: 6, Name: Rubicson
2015-05-20 17:16:27,006 - MainThread - rfx_protocols:161 - DEBUG - Id: 7, State: 0, Counter: 7, Name: AE Blyss
2015-05-20 17:16:27,024 - MainThread - rfx_protocols:161 - DEBUG - Id: 8, State: 1, Counter: 8, Name: Blinds T1/T2/T3/T4
2015-05-20 17:16:27,036 - MainThread - rfx_protocols:161 - DEBUG - Id: 9, State: 0, Counter: 9, Name: Blinds T0
2015-05-20 17:16:27,046 - MainThread - rfx_protocols:161 - DEBUG - Id: 10, State: 0, Counter: 10, Name: ProGuard
2015-05-20 17:16:27,077 - MainThread - rfx_protocols:161 - DEBUG - Id: 11, State: 0, Counter: 11, Name: FS20
2015-05-20 17:16:27,097 - MainThread - rfx_protocols:161 - DEBUG - Id: 12, State: 0, Counter: 12, Name: La Crosse
2015-05-20 17:16:27,105 - MainThread - rfx_protocols:161 - DEBUG - Id: 13, State: 1, Counter: 13, Name: Hideki / UPM
2015-05-20 17:16:27,108 - MainThread - rfx_protocols:161 - DEBUG - Id: 14, State: 0, Counter: 14, Name: AD Lightwave RF
2015-05-20 17:16:27,171 - MainThread - rfx_protocols:161 - DEBUG - Id: 15, State: 0, Counter: 15, Name: Mertik
2015-05-20 17:16:27,196 - MainThread - rfx_protocols:161 - DEBUG - Id: 16, State: 0, Counter: 16, Name: Visonic
2015-05-20 17:16:27,229 - MainThread - rfx_protocols:161 - DEBUG - Id: 17, State: 0, Counter: 17, Name: ATI
2015-05-20 17:16:27,250 - MainThread - rfx_protocols:161 - DEBUG - Id: 18, State: 1, Counter: 18, Name: Oregon Scientific
2015-05-20 17:16:27,269 - MainThread - rfx_protocols:161 - DEBUG - Id: 19, State: 1, Counter: 19, Name: Meiantech
2015-05-20 17:16:27,289 - MainThread - rfx_protocols:161 - DEBUG - Id: 20, State: 0, Counter: 20, Name: HomeEasy EU
2015-05-20 17:16:27,317 - MainThread - rfx_protocols:161 - DEBUG - Id: 21, State: 0, Counter: 21, Name: AC
2015-05-20 17:16:27,323 - MainThread - rfx_protocols:161 - DEBUG - Id: 22, State: 1, Counter: 22, Name: ARC
2015-05-20 17:16:27,354 - MainThread - rfx_protocols:161 - DEBUG - Id: 23, State: 0, Counter: 23, Name: X10
2015-05-20 17:16:27,369 - MainThread - rfx_protocols:165 - DEBUG - Tags total: 24
2015-05-20 17:16:27,385 - MainThread - rfx_protocols:172 - DEBUG - All tags found
2015-05-20 17:16:27,394 - MainThread - rfx_protocols:193 - DEBUG - msg3: [0, 0, 0, 0, 0, 0, 0, 0] / 00
2015-05-20 17:16:27,437 - MainThread - rfx_protocols:194 - DEBUG - msg4: [1, 0, 0, 0, 0, 1, 0, 0] / 84
2015-05-20 17:16:27,445 - MainThread - rfx_protocols:195 - DEBUG - msg5: [0, 0, 1, 1, 0, 0, 1, 0] / 32
2015-05-20 17:16:27,447 - MainThread - rfx_protocols:198 - DEBUG - Command: 0D00000003530000843200000000
2015-05-20 17:16:27,462 - MainThread - rfxcmd:2768 - DEBUG - Send set protocol message (0D00000003530000843200000000)
2015-05-20 17:16:27,481 - MainThread - rfxcmd:2770 - DEBUG - Sleep 1 sec
2015-05-20 17:16:28,542 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:16:28
2015-05-20 17:16:28,544 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 28
2015-05-20 17:16:28,560 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0D
2015-05-20 17:16:28,573 - MainThread - rfxcmd:2582 - DEBUG - Message: 0D 01 00 00 02 53 B8 00 84 32 00 01 02 00
2015-05-20 17:16:28,592 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0D 01 00 00 02 53 B8 00 84 32 00 01 02 00
2015-05-20 17:16:28,612 - MainThread - rfxcmd:330 - DEBUG - PacketType: 01
2015-05-20 17:16:28,615 - MainThread - rfxcmd:334 - DEBUG - SubType: 00
2015-05-20 17:16:28,617 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 17:16:28,619 - MainThread - rfxcmd:342 - DEBUG - Id1: 02
2015-05-20 17:16:28,635 - MainThread - rfxcmd:346 - DEBUG - Id2: 53
2015-05-20 17:16:28,637 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:16:28,661 - MainThread - rfxcmd:566 - DEBUG - Decode packetType 0x01 - Start
2015-05-20 17:16:28,680 - MainThread - rfxcmd:759 - DEBUG - Decode packetType 0x01 - End
2015-05-20 17:16:28,682 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
2015-05-20 17:16:28,706 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0D0100000253B800843200010200
2015-05-20 17:16:28,758 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:16:28
2015-05-20 17:16:28,761 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 14
2015-05-20 17:16:28,763 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0D
2015-05-20 17:16:28,786 - MainThread - rfxcmd:2582 - DEBUG - Message: 0D 01 00 00 03 53 B8 00 84 32 00 01 02 00
2015-05-20 17:16:28,801 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0D 01 00 00 03 53 B8 00 84 32 00 01 02 00
2015-05-20 17:16:28,812 - MainThread - rfxcmd:330 - DEBUG - PacketType: 01
2015-05-20 17:16:28,814 - MainThread - rfxcmd:334 - DEBUG - SubType: 00
2015-05-20 17:16:28,831 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 17:16:28,840 - MainThread - rfxcmd:342 - DEBUG - Id1: 03
2015-05-20 17:16:28,845 - MainThread - rfxcmd:346 - DEBUG - Id2: 53
2015-05-20 17:16:28,847 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:16:28,849 - MainThread - rfxcmd:566 - DEBUG - Decode packetType 0x01 - Start
2015-05-20 17:16:28,868 - MainThread - rfxcmd:759 - DEBUG - Decode packetType 0x01 - End
2015-05-20 17:16:28,881 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
2015-05-20 17:16:28,899 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0D0100000353B800843200010200
2015-05-20 17:16:35,142 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:16:35
2015-05-20 17:16:35,145 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 17:16:35,152 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 17:16:35,181 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 01 00 71 04 00 E8 21 02 59
2015-05-20 17:16:35,184 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 01 00 71 04 00 E8 21 02 59
2015-05-20 17:16:35,229 - MainThread - rfxcmd:330 - DEBUG - PacketType: 52
2015-05-20 17:16:35,237 - MainThread - rfxcmd:334 - DEBUG - SubType: 01
2015-05-20 17:16:35,243 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 00
2015-05-20 17:16:35,254 - MainThread - rfxcmd:342 - DEBUG - Id1: 71
2015-05-20 17:16:35,257 - MainThread - rfxcmd:346 - DEBUG - Id2: 04
2015-05-20 17:16:35,279 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:16:35,285 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 17:16:35,334 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 17:16:35,350 - Thread-2 - rfx_command:51 - DEBUG - Thread started, timeout = 10, command : /tmp/rfxcom_remote.sh packettype=52 subtype=01 id=7104 temperature=23.2 humidity=33 signal=5 battery=9
2015-05-20 17:16:35,342 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = THGN122/123, THGN132, THGR122/228/238/268
Seqnbr = 00
Id = 7104
Temperature = 23.2 C
Humidity = 33%
Humidity Status = Normal
Battery = 9
Signal level = 5
2015-05-20 17:16:35,458 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A520100710400E8210259
2015-05-20 17:16:39,882 - Thread-2 - rfx_command:54 - DEBUG - Return code: 0
2015-05-20 17:16:39,893 - Thread-2 - rfx_command:55 - DEBUG - Thread finished
2015-05-20 17:16:40,270 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:16:40
2015-05-20 17:16:40,273 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 17:16:40,283 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 17:16:40,314 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 01 01 EA 01 00 D5 2B 01 69
2015-05-20 17:16:40,316 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 01 01 EA 01 00 D5 2B 01 69
2015-05-20 17:16:40,341 - MainThread - rfxcmd:330 - DEBUG - PacketType: 52
2015-05-20 17:16:40,356 - MainThread - rfxcmd:334 - DEBUG - SubType: 01
2015-05-20 17:16:40,370 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 01
2015-05-20 17:16:40,373 - MainThread - rfxcmd:342 - DEBUG - Id1: EA
2015-05-20 17:16:40,389 - MainThread - rfxcmd:346 - DEBUG - Id2: 01
2015-05-20 17:16:40,393 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:16:40,395 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 17:16:40,454 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 17:16:40,456 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = THGN122/123, THGN132, THGR122/228/238/268
Seqnbr = 01
Id = EA01
Temperature = 21.3 C
Humidity = 43%
Humidity Status = Comfort
Battery = 9
Signal level = 6
2015-05-20 17:16:40,481 - Thread-4 - rfx_command:51 - DEBUG - Thread started, timeout = 10, command : /tmp/rfxcom_remote.sh packettype=52 subtype=01 id=EA01 temperature=21.3 humidity=43 signal=6 battery=9
2015-05-20 17:16:40,560 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A520101EA0100D52B0169
2015-05-20 17:16:44,657 - Thread-4 - rfx_command:54 - DEBUG - Return code: 0
2015-05-20 17:16:44,678 - Thread-4 - rfx_command:55 - DEBUG - Thread finished
2015-05-20 17:16:49,312 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:16:49
2015-05-20 17:16:49,315 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 9
2015-05-20 17:16:49,318 - MainThread - rfxcmd:2575 - DEBUG - Byte: 08
2015-05-20 17:16:49,337 - MainThread - rfxcmd:2582 - DEBUG - Message: 08 20 08 02 B4 7D 7C 04 59
2015-05-20 17:16:49,431 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:16:49,445 - MainThread - rfxcmd:1269 - DEBUG - Decode packetType 0x20 - Start
2015-05-20 17:16:49,490 - MainThread - rfxcmd:1305 - DEBUG - Decode packetType 0x20 - End
2015-05-20 17:16:49,492 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = Meiantech
Seqnbr = 02
Id = B47D7C
Status = Motion
Battery = 9
Signal level = 5
2015-05-20 17:16:49,510 - Thread-6 - rfx_command:51 - DEBUG - Thread started, timeout = 10, command : /tmp/rfxcom_remote.sh packettype=20 subtype=08 id=B47D7C status=Motion signal=5 battery=9
2015-05-20 17:16:49,582 - MainThread - rfxcmd:2787 - DEBUG - Processed: 08200802B47D7C0459
2015-05-20 17:16:53,049 - Thread-6 - rfx_command:54 - DEBUG - Return code: 0
2015-05-20 17:16:53,052 - Thread-6 - rfx_command:55 - DEBUG - Thread finished
2015-05-20 17:17:18,146 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:17:18
2015-05-20 17:17:18,155 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 17:17:18,170 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 17:17:18,199 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 01 03 71 04 00 E8 21 02 59
2015-05-20 17:17:18,205 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 01 03 71 04 00 E8 21 02 59
2015-05-20 17:17:18,232 - MainThread - rfxcmd:330 - DEBUG - PacketType: 52
2015-05-20 17:17:18,234 - MainThread - rfxcmd:334 - DEBUG - SubType: 01
2015-05-20 17:17:18,253 - MainThread - rfxcmd:338 - DEBUG - SeqNbr: 03
2015-05-20 17:17:18,255 - MainThread - rfxcmd:342 - DEBUG - Id1: 71
2015-05-20 17:17:18,258 - MainThread - rfxcmd:346 - DEBUG - Id2: 04
2015-05-20 17:17:18,287 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:17:18,293 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 17:17:18,313 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 17:17:18,322 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = THGN122/123, THGN132, THGR122/228/238/268
Seqnbr = 03
Id = 7104
Temperature = 23.2 C
Humidity = 33%
Humidity Status = Normal
Battery = 9
Signal level = 5
Time between message = 43
2015-05-20 17:17:18,343 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A520103710400E8210259
2015-05-20 17:17:19,260 - MainThread - rfxcmd:2572 - DEBUG - Timestamp: 2015-05-20 17:17:19
2015-05-20 17:17:19,263 - MainThread - rfxcmd:2573 - DEBUG - SerWaiting: 11
2015-05-20 17:17:19,276 - MainThread - rfxcmd:2575 - DEBUG - Byte: 0A
2015-05-20 17:17:19,304 - MainThread - rfxcmd:2582 - DEBUG - Message: 0A 52 01 04 EA 01 00 D5 2B 01 69
2015-05-20 17:17:19,328 - MainThread - rfxcmd:2502 - DEBUG - Test message: 0A 52 01 04 EA 01 00 D5 2B 01 69
2015-05-20 17:17:19,404 - MainThread - rfxcmd:351 - DEBUG - Verify correct packet length
2015-05-20 17:17:19,420 - MainThread - rfxcmd:1602 - DEBUG - Decode packetType 0x52 - Start
2015-05-20 17:17:19,435 - MainThread - rfxcmd:1660 - DEBUG - Decode packetType 0x52 - End
2015-05-20 17:17:19,437 - MainThread - rfxcmd:2440 - DEBUG - Decode packetType result :
Subtype = THGN122/123, THGN132, THGR122/228/238/268
Seqnbr = 04
Id = EA01
Temperature = 21.3 C
Humidity = 43%
Humidity Status = Comfort
Battery = 9
Signal level = 6
Time between message = 39
2015-05-20 17:17:19,469 - MainThread - rfxcmd:2787 - DEBUG - Processed: 0A520104EA0100D52B0169
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
Re: Mise à jour RFXCOM, enOcean, Edisio
Me manque le cat /tmp/rfxcom_remote.sh
Et me dire si tu mets un /jeedom quand tu vas sur jeedom ? Tu as aussi un reglage bizarre https en interne et http en externe d'habitude c'est l'inverse
Et me dire si tu mets un /jeedom quand tu vas sur jeedom ? Tu as aussi un reglage bizarre https en interne et http en externe d'habitude c'est l'inverse
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
Ou trouver le cat ?
J'utilise pas le /jeedom et pour le https c'est parce que j'ai fait un essai en voyant le forum
J'utilise pas le /jeedom et pour le https c'est parce que j'ai fait un essai en voyant le forum
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
Re: Mise à jour RFXCOM, enOcean, Edisio
Ok enleve le https alors, remet le port 80 et relance le demon
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
C'est fait et j'ai l'impression que c'est pareil
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
Re: Mise à jour RFXCOM, enOcean, Edisio
Je viens de faire une version avec plus de debug lance la et dis moi ce que tu as en debug, donne moi aussi ta version jeedom
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Re: Mise à jour RFXCOM, enOcean, Edisio
je viens de voir qu'une version 1.189.0 est dispo pour le core
Je fais la mise à jour du Core et du rfxcom et je te donne le debug
Je fais la mise à jour du Core et du rfxcom et je te donne le debug
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
Re: Mise à jour RFXCOM, enOcean, Edisio
Ca à l'air de fonctionner là.
Je vais voir dans le temps si j'ai toujours mes remontées d'informations.
Par contre j'ai supprimer un ancien capteur de température nommé SALON j'ai remis un nouveau mais in ne veut pas le renommer en SALON comme si il y avait un conflit, j'ai même un message d'erreur alors que j'ai plus de capteurs nommé SALON
Une idée?
Je vais voir dans le temps si j'ai toujours mes remontées d'informations.
Par contre j'ai supprimer un ancien capteur de température nommé SALON j'ai remis un nouveau mais in ne veut pas le renommer en SALON comme si il y avait un conflit, j'ai même un message d'erreur alors que j'ai plus de capteurs nommé SALON
Une idée?
Jeedom sur ESXi SSD Debian 9.
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
ZWAVE, RFXCOM, BT, TéléInfo, WifiLight, Alexa
9 Sondes, 4 Detecteurs 6 Ouvertures en 433.
9 Modules Zwave
5 Cams IP
Re: Mise à jour RFXCOM, enOcean, Edisio
C'est quoi le message d'erreur ?
Aide nous à t'aider : mets des logs, détaille ton soucis... Vous n'aurez aucune réponse de ma part si votre demande n'est pas détaillée (log, capture d'écran lisible...) ou si vous ne postez pas dans la bonne section
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité
