Santé RFLink
Résultat Conseil
Gateway inconnue
Service OK
Dépendances OK
Log RFLink Dep
Code : Tout sélectionner
Début de l'installtion
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
avrdude is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 31 not upgraded.
mkdir: cannot create directory '/var/www': File exists
rm: cannot remove 'node_modules': Directory not empty
> serialport@2.0.5 install /usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/serialport
> node-pre-gyp install --fallback-to-build
ture/1.1.0/package.tgz
npm ERR! tar.unpack untar error /root/.npm/har-validator/2.0.3/package.tgz
npm ERR! tar.unpack untar error /root/.npm/qs/5.2.0/package.tgz
npm ERR! tar.unpack untar error /root/.npm/hawk/3.1.2/package.tgz
npm ERR! Linux 4.1.7-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "install" "--unsafe-perm" "request"
npm ERR! node v0.12.7
npm ERR! npm v2.11.3
npm ERR! path /usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/request/node_modules/node-uuid/component.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! enoent ENOENT, open '/usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/request/node_modules/node-uuid/component.json'
npm ERR! enoent This is most likely not a problem with npm itself
npm ERR! enoent and is related to npm not being able to find a file.
npm ERR! enoent
npm ERR! Please include the following file with any support request:
npm ERR! /usr/share/nginx/www/jeedom/plugins/rflink/node/npm-debug.log
chown: cannot access 'node_modules': No such file or directory
Fin de l'installtion
make: Entering directory '/usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/serialport/build'
CXX(target) Release/obj.target/serialport/src/serialport.o
CXX(target) Release/obj.target/serialport/src/serialport_unix.o
CXX(target) Release/obj.target/serialport/src/serialport_poller.o
SOLINK_MODULE(target) Release/obj.target/serialport.node
COPY Release/serialport.node
COPY /usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/serialport/build/Release/node-v14-linux-arm/serialport.node
TOUCH Release/obj.target/action_after_build.stamp
make: Leaving directory '/usr/share/nginx/www/jeedom/plugins/rflink/node/node_modules/serialport/build'
serialport@2.0.5 node_modules/serialport
├── bindings@1.2.1
├── sf@0.1.7
├── async@0.9.0
├── debug@2.2.0 (ms@0.7.1)
├── optimist@0.6.1 (wordwrap@0.0.3, minimist@0.0.10)
└── nan@2.0.9
request@2.67.0 node_modules/request
├── is-typedarray@1.0.0
├── aws-sign2@0.6.0
├── forever-agent@0.6.1
├── caseless@0.11.0
├── stringstream@0.0.5
├── oauth-sign@0.8.0
├── tunnel-agent@0.4.2
├── isstream@0.1.2
├── json-stringify-safe@5.0.1
├── extend@3.0.0
├── node-uuid@1.4.7
├── combined-stream@1.0.5 (delayed-stream@1.0.0)
├── qs@5.2.0
├── mime-types@2.1.8 (mime-db@1.20.0)
├── tough-cookie@2.2.1
├── form-data@1.0.0-rc3 (async@1.5.0)
├── bl@1.0.0 (readable-stream@2.0.5)
├── http-signature@1.1.0 (assert-plus@0.1.5, jsprim@1.2.2, sshpk@1.7.1)
├── har-validator@2.0.3 (pinkie-promise@2.0.0, commander@2.9.0, chalk@1.1.1, is-my-json-valid@2.12.3)
└── hawk@3.1.2 (cryptiles@2.0.5, sntp@1.0.9, boom@2.10.1, hoek@2.16.3)
Fin de l'installtion
Code : Tout sélectionner
avrdude: Version 6.1, compiled on Jul 7 2015 at 10:29:47
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/var/www/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyUSB21
Using Programmer : wiring
Overriding Baud Rate : 115200
avrdude: wiring_open(): releasing DTR/RTS
avrdude: wiring_open(): asserting DTR/RTS
avrdude: ser_recv(): programmer is not responding
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: ser_recv(): programmer is not respoavrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: ser_recv(): programmer is not responding
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: ser_recv(): programmer is not responding
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer
avrdude done. Thank you.
ating with programmer
avrdude done. Thank you.
Thanks