Plugin Z-Wave Version 2016-05-30 Stable

[matric]

Bonjour,

Version installée z-wave du 04/05/2016
Maj proposée du 30/05/2016

Suite à quelques avis positifs sur cette maj, je me suis lancé.
Résultat: Dépendances non installées.

J'ai relancé l'installation des dépendances comme demandé dans le démon.
Résultat: Dépendances installées, démon OK, tout est au vert.

Une 1/2h après:
Santé/Zwave --> page blanche
Réseaux zwave/Table de routage --> page blanche
Réseaux zwave/Graphique du réseau --> page blanche

Redémarrage du démon, résultat: Dépendances non installées

Santé/Zwave --> tous les modules sont présents
Réseaux zwave/Table de routage --> tous les modules sont présents
Réseaux zwave/Graphique du réseau --> tous les modules sont présents
Pas à jour d'interview mais présents.

Réinstallation des dépendances --> Dépendances non installées

Santé/Zwave --> page blanche
Réseaux zwave/Table de routage --> page blanche
Réseaux zwave/Graphique du réseau --> page blanche

Log update:

[2016-05-31 10:10:53][update][ALERT] : [START UPDATE]
[2016-05-31 10:10:53][update][ALERT] : Début de la mise à jour de : openzwave
[2016-05-31 10:10:53][update][ALERT] : Téléchargement de openzwave...
[2016-05-31 10:11:03][update][ALERT] : OK
[2016-05-31 10:11:03][update][ALERT] : Action de pre update...
[2016-05-31 10:11:04][update][ALERT] : OK
[2016-05-31 10:11:04][update][ALERT] : Décompression du zip...
[2016-05-31 10:11:07][update][ALERT] : OK
[2016-05-31 10:11:07][update][ALERT] : Installation de openzwave...
[2016-05-31 10:11:07][update][ALERT] : OK
[2016-05-31 10:11:39][update][ALERT] : [END UPDATE SUCCESS]

Log openzwave_update:

Lancement de l'installation/mise à jour des dépendances openzwave
Ign http://ftp.debian.org jessie InRelease
Hit http://archive.raspberrypi.org jessie InRelease
Get:1 http://ftp.debian.org jessie Release.gpg [2373 B]
Hit http://ftp.debian.org jessie Release
Ign http://ftp.debian.org jessie Release
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Ign http://ftp.debian.org jessie/main armhf Packages/DiffIndex
Ign http://ftp.debian.org jessie/contrib armhf Packages/DiffIndex
Ign http://ftp.debian.org jessie/non-free armhf Packages/DiffIndex
Hit http://ftp.debian.org jessie/contrib Translation-en
Hit http://ftp.debian.org jessie/main Translation-en
Hit http://ftp.debian.org jessie/main Translation-fr
Hit http://ftp.debian.org jessie/non-free Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-fr
Hit http://ftp.debian.org jessie/main armhf Packages
Hit http://ftp.debian.org jessie/contrib armhf Packages
Hit http://mirrordirector.raspbian.org jessie InRelease
Hit http://ftp.debian.org jessie/non-free armhf Packages
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Hit https://deb.nodesource.com jessie InRelease
Ign http://ftp.debian.org jessie/contrib Translation-fr
Ign http://ftp.debian.org jessie/non-free Translation-fr
Hit https://deb.nodesource.com jessie/main Sources
Hit https://deb.nodesource.com jessie/main armhf Packages
Get:2 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-fr
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Get:3 https://deb.nodesource.com jessie/main Translation-fr [162 B]
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-fr
Get:4 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:5 https://deb.nodesource.com jessie/main Translation-fr [162 B]
Get:6 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:7 https://deb.nodesource.com jessie/main Translation-fr [162 B]
Get:8 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:9 https://deb.nodesource.com jessie/main Translation-fr [162 B]
Get:10 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Get:11 https://deb.nodesource.com jessie/main Translation-fr [162 B]
Ign https://deb.nodesource.com jessie/main Translation-fr
Fetched 2373 B in 29s (81 B/s)
Reading package lists...
W: GPG error: http://ftp.debian.org jessie Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010 NO_PUBKEY CBF8D6FD518E17E1
Installation des dependances
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
g++ is already the newest version.
gcc is already the newest version.
git is already the newest version.
libjpeg-dev is already the newest version.
libudev-dev is already the newest version.
make is already the newest version.
mercurial is already the newest version.
python-dev is already the newest version.
python-louie is already the newest version.
python-lxml is already the newest version.
python-pip is already the newest version.
python-setuptools is already the newest version.
python-sphinx is already the newest version.
unzip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up rsyslog (8.4.2-1+deb8u2) ...
insserv: Service ramlog has to be enabled to start service rsyslog
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing package rsyslog (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
rsyslog
E: Sub-process /usr/bin/dpkg returned an error code (1)
could not install mercurial - abort

Log openzwavecmd:

31-05-2016 11:08:51 | info | Check flask dependency
31-05-2016 11:08:52 | info | --> pass
31-05-2016 11:08:52 | info | Check other dependency
31-05-2016 11:08:52 | info | --> pass
31-05-2016 11:08:52 | info | Check Openzwave
31-05-2016 11:08:53 | info | --> pass
31-05-2016 11:08:53 | info | Validate startup arguments
Fatal Error: [Errno 98] Address already in use

Reboot du RPI2:

Dépendances statut NOK
Démon statut NOK
configuration NOK Dépendances non installées

Relance de l'installation des dépendances

Démon Statut OK
Configuration NOK
Dépendances Statut NOK Dépendances non installées

Santé/Zwave --> tous les modules sont présents
Réseaux zwave/Table de routage --> tous les modules sont présents
Réseaux zwave/Graphique du réseau --> tous les modules sont présents
Pas à jour d'interview mais présents.
7 modules / 20 remontés au bout de 1h15.

Config Démon et Statut Dépendances toujours NOK

C'est grave Docteur ?
Là je suis au bout de mes compétences sur le sujet alors toutes les infos me seraient précieuses.
Désolé pour la longueur du post, j'ai essayé d'être le plus précis possible.

[vortex31]

Bonjour,
j'ai le même souci
voici la fin du log après installation
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-armv7l-2.7
creating build/temp.linux-armv7l-2.7/src-lib
creating build/temp.linux-armv7l-2.7/src-lib/libopenzwave
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-armv7l-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined
#define PY_SSIZE_T_CLEAN
^
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
from openzwave/cpp/src/Driver.h:42,
from src-lib/libopenzwave/libopenzwave.cpp:249:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning [-Wunknown-pragmas]
#pragma warning( disable : 4324 )
^
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning [-Wunknown-pragmas]
#pragma warning( default : 4324 )
^
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_268beginControllerCommand(__pyx_obj_12libopenzwave_PyManager*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:27540:204: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated (declared at openzwave/cpp/src/Manager.h:1731) [-Wdeprecated-declarations]
__pyx_t_6 = __Pyx_PyBool_FromLong(__pyx_v_self->manager->BeginControllerCommand(__pyx_t_1, __pyx_t_2, __pyx_f_12libopenzwave_ctrl_callback, ((void *)__pyx_v_pythonfunc), __pyx_t_3, __pyx_t_4, __pyx_t_5)); if (unlikely(!__pyx_t_6)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4119; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
^
src-lib/libopenzwave/libopenzwave.cpp:329:36: note: in definition of macro '__Pyx_PyBool_FromLong'
#define __Pyx_PyBool_FromLong(b) ((b) ? (Py_INCREF(Py_True), Py_True) : (Py_INCREF(Py_False), Py_False))
^
arm-linux-gnueabihf-gcc: internal compiler error: Killed (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-4.9/README.Bugs> for instructions.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 4
Makefile:266: recipe for target 'build' failed
make: *** [build] Error 1
sed: couldn't open temporary file /boot/sedVScUtS: Read-only file system
Everything is successfully installed!

une petite aide serait le bien venue

[nechry]

@matric

sudo rm /var/lib/dpkg/info/$mercurial* -f
sudo apt-get install mercurial

puis refaire les dépendances

[extrapitou]

Coucou,

update faite

Premier lancement j'ai eu un message 540 gateway timeout, mais l'update à été faite, mais version des librairies pas bonne après update, et dépendances+démon NOK.

J'ai relancer l'installation des dépendances, OK mais démon toujours NOK.

J'ai relancer démon est c'est OK

Merci nechry et merci aux betatesteur

Envoyé avec TapataCash !

[vortex31]

REbonjour,
je n'arrive toujours pas a relancer les dépendances,
ce que j'ai fais en SSH
sudo apt-get update
sudo apt-get upgrade
relancer les dépendances
sudo rm /var/lib/dpkg/info/$mercurial* -f
sudo apt-get install mercurial
arrêter jeedom électriquement
relancer les dépendances

et toujours rien
les dépendances reste bloqué à 75%
merci

[matric]

@matric
sudo rm /var/lib/dpkg/info/$mercurial* -f
sudo apt-get install mercurial
puis refaire les dépendances

YEEEEESSSSSSSSSS .... C'est tout vert comme le bonhomme de la pub !
C'est fou comme 2 lignes de commandes peuvent rendre un jeedomien heureux.
Y'a pas à dire, ta qualité de Dieu de Jeedom n'est pas usurpée
Merci pour ton intervention nechry.

[matric]

les dépendances reste bloqué à 75%

J'ai rencontré la même situation, installation qui ne finit pas avec indication d'exécution de 75%.
En fait si tu vas voir dans les logs: Analyse / Logs / openzwave_update
--> tu verras en bas la ligne "Everything is successfully installed!"
Si ensuite tu retournes sur la page du plugin ZWAVE tu constates que tout est passé au vert, les dépendances sont installées.

Désolé de ne pas avoir vu ton post avant, j'étais focalisé sur mon problème.

[vortex31]

Merci pour ta réponse, je regarderais ce soir,
oui j'avais bien "Everything is successfully installed" mais les dépendance restait sur le rouge aussi que dans la santé Zwave même en redémarrant jeedom toujours NOK.

[domomat]

MAJ faite et RAS. Beau travail !
Le Zwave était le point faible de jeedom il y a un an. C'est au fil des versions, devenu aujourd'hui un de ses points forts. Bravo !

Envoyé de mon SM-G930F en utilisant Tapatalk

[nechry]

@domomat merci ça fait très plaisir à lire.

[nechry]

Merci aussi à tout ceux qui donne le retour positif dans ce fil, ça fait du bien de savoir que ça fonctionne chez la majorité et ne pas que voire que ceux où il y a un souci.

je me répète mais, si vous n'avez pas noté le plugin sur le market et ou que votre opinion a changé en bien (en moins bien vous pouvez vous abstenir...lol), n'hésité pas a donner une note au plugin. C'est aussi un élément motivateur pour moi.

la documentation à été aussi mise à jour avec les nouvelles features, pensez la relire où la scruter afin de profiter au maximum des fonctionnalités du plugin. Il y a peut-être un élément intéressant encore inconnue.

Je suis aussi ouvert aux demandes d'évolutions. Certaines fonctions de cette version ont été ajoutées à la demande d'utilisateurs.

J'ai déjà débuté les travaux de la prochaine version, elle ne devrait pas être autant riche en nouveauté que les deux dernière mais aller dans le sens de la stabilisation des nouveautés apportées. La prochaine version est surtout pour aller avec la nouvelle version de jeedom core en V2.3.

merci encore des encoragements

[Croixamus]

Bonjour @nechry et merci pour le travail
Pour info, j'avais au début un soucis de "démon" NOK (idem après reboot) et en regardant les logs, j'ai vu qu'il s'arrêtait sur une erreur réseau.
Dans ma conf réseau /jeedom avait été ajouté dans "complément" ?
Je supprimé le /jeedom, enregistré et le démon est passé OK
Cdt,

[Amaustan]

Hello,

Tout OK pour moi au niveau de la MàJ. Le système ZWave semble s'améliorer à chaque étape !!

Merci.

Benjamin

[NonoM45]

Bonjour à tous, bonjour à toi au grand maître du Z-wave

Comme Benjamin, j'aimerai que ce soit le cas..

Tout OK pour moi au niveau de la MàJ. Le système ZWave semble s'améliorer à chaque étape !!

Mais comme à chaque fois pour moi, la remontée d'informations batterie sur mes FGMS-001 (Fibaro Motion Snesor) ne se fait pas

2016-06-01_11h27_43.png (52.5 Kio) Consulté 1221 fois

Nechery que dois-je encore faire....

Cordialement

[nechry]

@NonoM45 pour que je comprenne bien, tu as plus de remonté battery depuis la mise à jour ou tu avais déjà ce problème avant.

j'ai eux le cas chez moi d'un FGMS-001 qui ne me remontait plus sont état de pile, même après avoir remplacé. ma seul solution à été d'exclure.

sinon faut juste attendre 24h que le refresh ce fait

[pp30]

Mise à jour faite il y a 24 heures sur Debian 8.3
Tout fonctionne parfaitement.
Merci nechry !
Cordialement.

[shinji99]

Bonjour a tous

désolé de casser l'ambiance
super boulot tout de même au passage nechry

mais depuis la maj j'ai de gros soucis de remontées de valeur de mes detecteur de fumées qui fonctionnaient bien jusque lors

et j'ai ce message au redémarrage

2016-06-01 15:10:06 openzwavecmd Impossible de lancer le démon openzwave, relancer le démon en debug et vérifiez la log

si j'essaye de passer en debug je me retrouve avec une erreur Gateway 504 et rien ne ce passe

[nechry]

désactive le mode automatique. puis essaie de stoper sinon redémarre jeedom. là tu pourras démarrer en debug et regarder et fournir le log. de façon général l'erreur est assez explicite

[DenisPac]

Bonjour,

J'ai lancé la mise à jour en même temps sur mon Jeedom maître avec clé Aeon Z-Stick S2 et sur mon Jeedom déporté Jeedom Mini avec Razberry.
Ça s'est bien passé sur le Jeedom maître, mais la version 1.4.428 de la librairie ne veut pas s'installer sur la Mini+Razberry. Elle reste en 1.4.167.

Le log de l'installation de ma dernière tentative d'installation des dépendances:

Code : Tout sélectionner

Building ZWSecurity.o
Building Group.o
Building Node.o
Building Manager.o
Building Msg.o
Building Notification.o
Creating vers.cpp
Building vers.o
Linking Static Library
Linking Shared Library
Making ozw_config file
make[2]: Entering directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
Building Main.o
Linking /opt/python-openzwave/openzwave/.lib/MinOZW
g++   -o /opt/python-openzwave/openzwave/.lib/MinOZW /opt/python-openzwave/openzwave/.lib/Main.o /opt/python-openzwave/openzwave/libopenzwave.so -pthread
Creating Temporary Shell Launch Script
make[2]: Leaving directory '/opt/python-openzwave/openzwave/cpp/examples/MinOZW'
make[1]: Leaving directory '/opt/python-openzwave/openzwave'
python setup-lib.py build
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-armv6l-2.7
creating build/temp.linux-armv6l-2.7/src-lib
creating build/temp.linux-armv6l-2.7/src-lib/libopenzwave
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-armv6l-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for Ada/C/ObjC but not for C++ [enabled by default]
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined [enabled by default]
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
from openzwave/cpp/src/Driver.h:42,
from src-lib/libopenzwave/libopenzwave.cpp:243:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_11NullHandler_emit(PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:2542:13: warning: variable '__pyx_v_self' set but not used [-Wunused-but-set-variable]
src-lib/libopenzwave/libopenzwave.cpp:2543:13: warning: variable '__pyx_v_record' set but not used [-Wunused-but-set-variable]
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_134beginControllerCommand(PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:23107:15: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated (declared at openzwave/cpp/src/Manager.h:1731) [-Wdeprecated-declarations]
creating build/lib.linux-armv6l-2.7
g++ -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro build/temp.linux-armv6l-2.7/src-lib/libopenzwave/libopenzwave.o openzwave/libopenzwave.a -ludev -lstdc++ -o build/lib.linux-armv6l-2.7/libopenzwave.so
python setup-lib.py install
running install
Checking .pth file support in /usr/local/lib/python2.7/dist-packages/
/usr/bin/python -E -c pass
TEST PASSED: /usr/local/lib/python2.7/dist-packages/ appears to support .pth files
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv6l/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-armv6l
creating build/bdist.linux-armv6l/egg
copying build/lib.linux-armv6l-2.7/libopenzwave.so -> build/bdist.linux-armv6l/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-armv6l/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-armv6l/egg
running install_data
creating build/bdist.linux-armv6l/egg/config
copying openzwave/config/options.xml -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/manufacturer_specific.xml -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/device_classes.xml -> build/bdist.linux-armv6l/egg/config
creating build/bdist.linux-armv6l/egg/config/greenwave
copying openzwave/config/greenwave/powernode6.xml -> build/bdist.linux-armv6l/egg/config/greenwave
copying openzwave/config/greenwave/powernode1.xml -> build/bdist.linux-armv6l/egg/config/greenwave
creating build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/ses303.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/srt323.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/hrt4zw.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/sir321.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/scsc17.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/asrzw.xml -> build/bdist.linux-armv6l/egg/config/horstmann
copying openzwave/config/horstmann/ses302.xml -> build/bdist.linux-armv6l/egg/config/horstmann
creating build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/009303.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/123658.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/solar-siren.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/smoke-detector.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/009105.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/123580.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/123601.xml -> build/bdist.linux-armv6l/egg/config/popp
copying openzwave/config/popp/zweather.xml -> build/bdist.linux-armv6l/egg/config/popp
creating build/bdist.linux-armv6l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa3.xml -> build/bdist.linux-armv6l/egg/config/fortrezz
copying openzwave/config/fortrezz/ssa2.xml -> build/bdist.linux-armv6l/egg/config/fortrezz
copying openzwave/config/fortrezz/mimolite.xml -> build/bdist.linux-armv6l/egg/config/fortrezz
creating build/bdist.linux-armv6l/egg/config/2gig
copying openzwave/config/2gig/ct30.xml -> build/bdist.linux-armv6l/egg/config/2gig
copying openzwave/config/2gig/ct100.xml -> build/bdist.linux-armv6l/egg/config/2gig
copying openzwave/config/2gig/ct101.xml -> build/bdist.linux-armv6l/egg/config/2gig
creating build/bdist.linux-armv6l/egg/config/sensative
copying openzwave/config/sensative/strips.xml -> build/bdist.linux-armv6l/egg/config/sensative
creating build/bdist.linux-armv6l/egg/config/iris
copying openzwave/config/iris/rangeextender.xml -> build/bdist.linux-armv6l/egg/config/iris
creating build/bdist.linux-armv6l/egg/config/danfoss
copying openzwave/config/danfoss/z.xml -> build/bdist.linux-armv6l/egg/config/danfoss
copying openzwave/config/danfoss/rsroom.xml -> build/bdist.linux-armv6l/egg/config/danfoss
copying openzwave/config/danfoss/living.xml -> build/bdist.linux-armv6l/egg/config/danfoss
creating build/bdist.linux-armv6l/egg/config/assa_abloy
copying openzwave/config/assa_abloy/RealLivingCapTouch.xml -> build/bdist.linux-armv6l/egg/config/assa_abloy
creating build/bdist.linux-armv6l/egg/config/intermatic
copying openzwave/config/intermatic/ca8900.xml -> build/bdist.linux-armv6l/egg/config/intermatic
creating build/bdist.linux-armv6l/egg/config/fakro
copying openzwave/config/fakro/zws230.xml -> build/bdist.linux-armv6l/egg/config/fakro
copying openzwave/config/fakro/zws12.xml -> build/bdist.linux-armv6l/egg/config/fakro
creating build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs412.xml -> build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs513.xml -> build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs411.xml -> build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs312.xml -> build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs311.xml -> build/bdist.linux-armv6l/egg/config/mcohome
copying openzwave/config/mcohome/mhs314.xml -> build/bdist.linux-armv6l/egg/config/mcohome
creating build/bdist.linux-armv6l/egg/config/enerwave
copying openzwave/config/enerwave/zw15s.xml -> build/bdist.linux-armv6l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-sc7.xml -> build/bdist.linux-armv6l/egg/config/enerwave
copying openzwave/config/enerwave/zw20r.xml -> build/bdist.linux-armv6l/egg/config/enerwave
copying openzwave/config/enerwave/zw500d.xml -> build/bdist.linux-armv6l/egg/config/enerwave
copying openzwave/config/enerwave/zwn-bpc.xml -> build/bdist.linux-armv6l/egg/config/enerwave
creating build/bdist.linux-armv6l/egg/config/dragontech
copying openzwave/config/dragontech/wd-100.xml -> build/bdist.linux-armv6l/egg/config/dragontech
creating build/bdist.linux-armv6l/egg/config/qees
copying openzwave/config/qees/reto-dimmer-plus.xml -> build/bdist.linux-armv6l/egg/config/qees
copying openzwave/config/qees/reto-plugin-switch.xml -> build/bdist.linux-armv6l/egg/config/qees
creating build/bdist.linux-armv6l/egg/config/zipato
copying openzwave/config/zipato/RGBBulb.xml -> build/bdist.linux-armv6l/egg/config/zipato
copying openzwave/config/zipato/MiniKeypad.xml -> build/bdist.linux-armv6l/egg/config/zipato
creating build/bdist.linux-armv6l/egg/config/domitech
copying openzwave/config/domitech/ze27eu.xml -> build/bdist.linux-armv6l/egg/config/domitech
creating build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zd2201.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zd2102.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zg8101.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zm1601eu.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zs5101eu.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zp3102.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zm1602eu5.xml -> build/bdist.linux-armv6l/egg/config/vision
copying openzwave/config/vision/zm1602eu.xml -> build/bdist.linux-armv6l/egg/config/vision
creating build/bdist.linux-armv6l/egg/config/dlink
copying openzwave/config/dlink/dch-z120.xml -> build/bdist.linux-armv6l/egg/config/dlink
copying openzwave/config/dlink/dch-z110.xml -> build/bdist.linux-armv6l/egg/config/dlink
copying openzwave/config/dlink/dch-z510.xml -> build/bdist.linux-armv6l/egg/config/dlink
creating build/bdist.linux-armv6l/egg/config/frostdale
copying openzwave/config/frostdale/fdn2nxx.xml -> build/bdist.linux-armv6l/egg/config/frostdale
creating build/bdist.linux-armv6l/egg/config/polycontrol
copying openzwave/config/polycontrol/polylock.xml -> build/bdist.linux-armv6l/egg/config/polycontrol
copying openzwave/config/polycontrol/doorlock.xml -> build/bdist.linux-armv6l/egg/config/polycontrol
copying openzwave/config/polycontrol/keypad.xml -> build/bdist.linux-armv6l/egg/config/polycontrol
creating build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pan08.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pan04.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pan03.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/phpat02.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pst02.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/psm02.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pst02-1c.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/psr04.xml -> build/bdist.linux-armv6l/egg/config/philio
copying openzwave/config/philio/pst02-b.xml -> build/bdist.linux-armv6l/egg/config/philio
creating build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz67.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz66d.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/sm103.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz68.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz65d.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tz88.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
copying openzwave/config/wenzhou/tsp01.xml -> build/bdist.linux-armv6l/egg/config/wenzhou
creating build/bdist.linux-armv6l/egg/config/duwi
copying openzwave/config/duwi/ZWESJ300.xml -> build/bdist.linux-armv6l/egg/config/duwi
copying openzwave/config/duwi/ZWES1000.xml -> build/bdist.linux-armv6l/egg/config/duwi
copying openzwave/config/duwi/zwfb.xml -> build/bdist.linux-armv6l/egg/config/duwi
creating build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgs211.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgs212.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgss101.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgfs101.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgr222.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgms.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgwpe.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgs221.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgrgbwm441.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgbs001.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgrm222.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgsd002.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgd211.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgd212.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgr221.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgs222.xml -> build/bdist.linux-armv6l/egg/config/fibaro
copying openzwave/config/fibaro/fgk001.xml -> build/bdist.linux-armv6l/egg/config/fibaro
creating build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/doorbell_gen5.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/ses2.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/multisensor_gen5.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/zstickgen5.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/ses2a.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/keyfob2.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/zw062_garage_door_controller.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/ses.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/sei2.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/alms.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/recessed_doorsensor_gen5.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/panicbtn.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/watersensor.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/sd6.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/doorwindow.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/multisensor6.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/dsd37.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/keyfob.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/ledbulb.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/zw120_doorwindow.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/minimote.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/dws6.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/dsd31.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/ss6.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/drycontactsensor.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/msesv2.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/recessed_doorsensor.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/hem.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/mmc.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/sei.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/zw112_doorwindow6.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/hemg2.xml -> build/bdist.linux-armv6l/egg/config/aeotec
copying openzwave/config/aeotec/hdss_gen5.xml -> build/bdist.linux-armv6l/egg/config/aeotec
creating build/bdist.linux-armv6l/egg/config/linear
copying openzwave/config/linear/WD500Z-1.xml -> build/bdist.linux-armv6l/egg/config/linear
copying openzwave/config/linear/PD300Z-2.xml -> build/bdist.linux-armv6l/egg/config/linear
creating build/bdist.linux-armv6l/egg/config/schlage
copying openzwave/config/schlage/BE469NXCEN.xml -> build/bdist.linux-armv6l/egg/config/schlage
creating build/bdist.linux-armv6l/egg/config/remotec
copying openzwave/config/remotec/zurc.xml -> build/bdist.linux-armv6l/egg/config/remotec
copying openzwave/config/remotec/zts-110.xml -> build/bdist.linux-armv6l/egg/config/remotec
copying openzwave/config/remotec/zfm-80.xml -> build/bdist.linux-armv6l/egg/config/remotec
copying openzwave/config/remotec/zxt-120.xml -> build/bdist.linux-armv6l/egg/config/remotec
creating build/bdist.linux-armv6l/egg/config/everspringct
copying openzwave/config/everspringct/hsm02.xml -> build/bdist.linux-armv6l/egg/config/everspringct
creating build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06433.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_064435.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/iTemp.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_06436.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/kfob.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/zweather.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WCD2.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_WALLC-S.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_KFOB-S.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_RC2.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
copying openzwave/config/zwave.me/ZME_05431.xml -> build/bdist.linux-armv6l/egg/config/zwave.me
creating build/bdist.linux-armv6l/egg/config/swiid
copying openzwave/config/swiid/swiidinter.xml -> build/bdist.linux-armv6l/egg/config/swiid
copying openzwave/config/swiid/swiidplug.xml -> build/bdist.linux-armv6l/egg/config/swiid
creating build/bdist.linux-armv6l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_cometz.xml -> build/bdist.linux-armv6l/egg/config/eurotronic
copying openzwave/config/eurotronic/eur_stellaz.xml -> build/bdist.linux-armv6l/egg/config/eurotronic
creating build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/PanicButton.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/PluginDimmer.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/AlarmSound.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/SceneController.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/TagReader.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/Molite.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/1poleswitch.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/EnergySwitch.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/DoorSensor.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/2poleswitch.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/HeatingControl.xml -> build/bdist.linux-armv6l/egg/config/BeNext
copying openzwave/config/BeNext/BuiltinDimmer.xml -> build/bdist.linux-armv6l/egg/config/BeNext
creating build/bdist.linux-armv6l/egg/config/cooper
copying openzwave/config/cooper/RF9505-T.xml -> build/bdist.linux-armv6l/egg/config/cooper
copying openzwave/config/cooper/RF9540-N.xml -> build/bdist.linux-armv6l/egg/config/cooper
creating build/bdist.linux-armv6l/egg/config/leviton
copying openzwave/config/leviton/vrcpg.xml -> build/bdist.linux-armv6l/egg/config/leviton
copying openzwave/config/leviton/vrf01.xml -> build/bdist.linux-armv6l/egg/config/leviton
copying openzwave/config/leviton/vri06.xml -> build/bdist.linux-armv6l/egg/config/leviton
copying openzwave/config/leviton/rzi10.xml -> build/bdist.linux-armv6l/egg/config/leviton
copying openzwave/config/leviton/vri10.xml -> build/bdist.linux-armv6l/egg/config/leviton
creating build/bdist.linux-armv6l/egg/config/schlagelink
copying openzwave/config/schlagelink/minikeypad.xml -> build/bdist.linux-armv6l/egg/config/schlagelink
copying openzwave/config/schlagelink/itemp.xml -> build/bdist.linux-armv6l/egg/config/schlagelink
creating build/bdist.linux-armv6l/egg/config/trane
copying openzwave/config/trane/TZEMT400AB32MAA.xml -> build/bdist.linux-armv6l/egg/config/trane
copying openzwave/config/trane/TZEMT400BB32MAA.xml -> build/bdist.linux-armv6l/egg/config/trane
creating build/bdist.linux-armv6l/egg/config/widom
copying openzwave/config/widom/UBS104.xml -> build/bdist.linux-armv6l/egg/config/widom
copying openzwave/config/widom/UME304C_S.xml -> build/bdist.linux-armv6l/egg/config/widom
creating build/bdist.linux-armv6l/egg/config/evolve
copying openzwave/config/evolve/lsm-15.xml -> build/bdist.linux-armv6l/egg/config/evolve
copying openzwave/config/evolve/lrm-as.xml -> build/bdist.linux-armv6l/egg/config/evolve
copying openzwave/config/evolve/ltm-5.xml -> build/bdist.linux-armv6l/egg/config/evolve
creating build/bdist.linux-armv6l/egg/config/merten
copying openzwave/config/merten/50x5xx.xml -> build/bdist.linux-armv6l/egg/config/merten
copying openzwave/config/merten/507801.xml -> build/bdist.linux-armv6l/egg/config/merten
creating build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHIA2.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHSDx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHLAx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBA2.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHDDx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHAA2.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHCA2.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHBDx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHNDx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJD1.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHTAx.xml -> build/bdist.linux-armv6l/egg/config/qubino
copying openzwave/config/qubino/ZMNHJA2.xml -> build/bdist.linux-armv6l/egg/config/qubino
creating build/bdist.linux-armv6l/egg/config/honeywell
copying openzwave/config/honeywell/th8320zw1000.xml -> build/bdist.linux-armv6l/egg/config/honeywell
creating build/bdist.linux-armv6l/egg/config/thermofloor
copying openzwave/config/thermofloor/heatit021.xml -> build/bdist.linux-armv6l/egg/config/thermofloor
creating build/bdist.linux-armv6l/egg/config/homeseer
copying openzwave/config/homeseer/ztroller.xml -> build/bdist.linux-armv6l/egg/config/homeseer
copying openzwave/config/homeseer/hsm200.xml -> build/bdist.linux-armv6l/egg/config/homeseer
copying openzwave/config/homeseer/hsm100.xml -> build/bdist.linux-armv6l/egg/config/homeseer
copying openzwave/config/homeseer/ezmotionplus.xml -> build/bdist.linux-armv6l/egg/config/homeseer
creating build/bdist.linux-armv6l/egg/config/rcs
copying openzwave/config/rcs/therm0007.xml -> build/bdist.linux-armv6l/egg/config/rcs
copying openzwave/config/rcs/therm0005.xml -> build/bdist.linux-armv6l/egg/config/rcs
copying openzwave/config/rcs/em52-zw.xml -> build/bdist.linux-armv6l/egg/config/rcs
copying openzwave/config/rcs/therm0009.xml -> build/bdist.linux-armv6l/egg/config/rcs
copying openzwave/config/rcs/pm12-zw.xml -> build/bdist.linux-armv6l/egg/config/rcs
creating build/bdist.linux-armv6l/egg/config/ge
copying openzwave/config/ge/dimmer_module.xml -> build/bdist.linux-armv6l/egg/config/ge
copying openzwave/config/ge/relay.xml -> build/bdist.linux-armv6l/egg/config/ge
copying openzwave/config/ge/dimmer.xml -> build/bdist.linux-armv6l/egg/config/ge
creating build/bdist.linux-armv6l/egg/config/vitrum
copying openzwave/config/vitrum/vitrumBS.xml -> build/bdist.linux-armv6l/egg/config/vitrum
creating build/bdist.linux-armv6l/egg/config/nodon
copying openzwave/config/nodon/cws3101wallswitch.xml -> build/bdist.linux-armv6l/egg/config/nodon
copying openzwave/config/nodon/asp3100SmartPlug.xml -> build/bdist.linux-armv6l/egg/config/nodon
copying openzwave/config/nodon/crc360xSofremote.xml -> build/bdist.linux-armv6l/egg/config/nodon
copying openzwave/config/nodon/crc3100OctanRemote.xml -> build/bdist.linux-armv6l/egg/config/nodon
creating build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/st815.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/an180.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/sm103.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/an145.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/an179.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/st812.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/ad147.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/tse03.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/st814.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/sf812.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/sp814.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/an158.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/an181.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/hsp02.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/ad146.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/se812.xml -> build/bdist.linux-armv6l/egg/config/everspring
copying openzwave/config/everspring/sp103.xml -> build/bdist.linux-armv6l/egg/config/everspring
creating build/bdist.linux-armv6l/egg/config/northq
copying openzwave/config/northq/nq92021.xml -> build/bdist.linux-armv6l/egg/config/northq
copying openzwave/config/northq/nq9121.xml -> build/bdist.linux-armv6l/egg/config/northq
creating build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zir010.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zdw232.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zrw103.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zdw103.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/lfm20.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zrp110.xml -> build/bdist.linux-armv6l/egg/config/act
copying openzwave/config/act/zdm230.xml -> build/bdist.linux-armv6l/egg/config/act
creating build/bdist.linux-armv6l/egg/config/waynedalton
copying openzwave/config/waynedalton/WDTC-20.xml -> build/bdist.linux-armv6l/egg/config/waynedalton
copying openzwave/config/zwscene.xsd -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/manufacturer_specific.xsd -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/options.xsd -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/zwcfg.xsd -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/device_configuration.xsd -> build/bdist.linux-armv6l/egg/config
copying openzwave/config/device_classes.xsd -> build/bdist.linux-armv6l/egg/config
creating build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
writing build/bdist.linux-armv6l/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg' and adding 'build/bdist.linux-armv6l/egg' to it
removing 'build/bdist.linux-armv6l/egg' (and everything under it)
Processing libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg
Extracting libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.0b9 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg
Processing dependencies for libopenzwave==0.3.0b9
Searching for six==1.9.0
Best match: six 1.9.0
six 1.9.0 is already the active version in easy-install.pth
Using /usr/local/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.0b9
Installation of lib finished.
python setup-api.py install
running install
Checking .pth file support in /usr/local/lib/python2.7/dist-packages/
/usr/bin/python -E -c pass
TEST PASSED: /usr/local/lib/python2.7/dist-packages/ appears to support .pth files
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv6l/egg
running install_lib
running build_py
creating build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-armv6l-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-armv6l-2.7/openzwave
creating build/bdist.linux-armv6l/egg
creating build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/command.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/network.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/scene.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/controller.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/option.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/object.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/__init__.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/singleton.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/group.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/node.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/openzwave/value.py -> build/bdist.linux-armv6l/egg/openzwave
copying build/lib.linux-armv6l-2.7/libopenzwave.so -> build/bdist.linux-armv6l/egg
byte-compiling build/bdist.linux-armv6l/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/network.py to network.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/option.py to option.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/singleton.py to singleton.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/node.py to node.pyc
byte-compiling build/bdist.linux-armv6l/egg/openzwave/value.py to value.pyc
creating build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-armv6l/egg/EGG-INFO
writing build/bdist.linux-armv6l/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.0b9-py2.7.egg' and adding 'build/bdist.linux-armv6l/egg' to it
removing 'build/bdist.linux-armv6l/egg' (and everything under it)
Processing openzwave-0.3.0b9-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0b9-py2.7.egg
Extracting openzwave-0.3.0b9-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.0b9 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.0b9-py2.7.egg
Processing dependencies for openzwave==0.3.0b9
Searching for libopenzwave==0.3.0b9
Best match: libopenzwave 0.3.0b9
Processing libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg
libopenzwave 0.3.0b9 is already the active version in easy-install.pth
Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.0b9-py2.7-linux-armv6l.egg
Searching for Louie==1.1
Best match: Louie 1.1
Adding Louie 1.1 to easy-install.pth file
Using /usr/lib/python2.7/dist-packages
Searching for six==1.9.0
Best match: six 1.9.0
six 1.9.0 is already the active version in easy-install.pth
Using /usr/local/lib/python2.7/dist-packages
Searching for nose==1.3.7
Best match: nose 1.3.7
nose 1.3.7 is already the active version in easy-install.pth
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin
Using /usr/local/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.0b9
Installation of API finished.

Ci-dessous le démon en debug :

Code : Tout sélectionner

01-06-2016 13:34:27 | info  | Check flask dependency
01-06-2016 13:34:29 | info  | --> pass
01-06-2016 13:34:29 | info  | Check other dependency
01-06-2016 13:34:30 | info  | --> pass
01-06-2016 13:34:30 | info  | Check Openzwave
01-06-2016 13:34:31 | info  | --> pass
01-06-2016 13:34:31 | info  | Validate startup arguments
01-06-2016 13:34:31 | info  | --> pass
01-06-2016 13:34:31 | info  | Validate callback configuration
01-06-2016 13:34:31 | info  | ...try to get response from: http://192.168.0.31:80/plugins/openzwave/core/php/jeeZwave.php
01-06-2016 13:34:32 | info  | --> pass
01-06-2016 13:34:32 | info  | Check if the port REST server available
01-06-2016 13:34:32 | info  | --> pass
01-06-2016 13:34:32 | info  | Validate zwcfg configuration file(s)
01-06-2016 13:34:32 | info  | ... check: /usr/share/nginx/www/jeedom/plugins/openzwave/core/class/../../data/zwcfg_0xe9bf5886.xml
01-06-2016 13:34:32 | debug | Push data to jeedom
01-06-2016 13:34:32 | info  | ******** The ZWave network is being started ********
01-06-2016 13:34:32 | info  | OpenZwave Library Version 1.4.167
01-06-2016 13:34:32 | info  | Python-OpenZwave Wrapper Version 0.3.0b9
01-06-2016 13:34:32 | info  | Waiting for network to become ready
01-06-2016 13:34:33 | info  | Openzwave network are started with homeId e9bf5886.
01-06-2016 13:34:33 | info  | A node has been added to OpenZWave list id:[1] model:[RaZberry Controller].
01-06-2016 13:34:33 | debug | The essential queries on a node have been completed. id:[1] model:[RaZberry Controller].
01-06-2016 13:34:33 | info  | A node has been added to OpenZWave list id:[2] model:[].
01-06-2016 13:34:33 | info  | A node has been added to OpenZWave list id:[3] model:[FGMS001 Motion Sensor].
01-06-2016 13:34:33 | debug | The essential queries on a node have been completed. id:[3] model:[FGMS001 Motion Sensor].
01-06-2016 13:34:33 | debug | Push data to jeedom
REST server starting in Debug mode
01-06-2016 13:34:36 | info  | A node has been added to OpenZWave list id:[4] model:[].
01-06-2016 13:34:36 | info  | A node has been added to OpenZWave list id:[5] model:[].
01-06-2016 13:34:36 | info  | A node has been added to OpenZWave list id:[6] model:[].
01-06-2016 13:34:36 | info  | A node has been added to OpenZWave list id:[17] model:[FGWPE Wall Plug].
01-06-2016 13:34:36 | debug | The essential queries on a node have been completed. id:[17] model:[FGWPE Wall Plug].
01-06-2016 13:34:36 | info  | A node has been added to OpenZWave list id:[18] model:[FGWPE Wall Plug].
01-06-2016 13:34:36 | debug | The essential queries on a node have been completed. id:[18] model:[FGWPE Wall Plug].
01-06-2016 13:34:37 | info  | A node has been added to OpenZWave list id:[19] model:[].
01-06-2016 13:34:37 | info  | A node has been added to OpenZWave list id:[20] model:[].
01-06-2016 13:34:37 | info  | A node has been added to OpenZWave list id:[21] model:[].
01-06-2016 13:34:37 | debug | NodeId 17 send a notification: NoOperation
01-06-2016 13:34:37 | debug | NodeId 18 send a notification: NoOperation
01-06-2016 13:34:41 | debug | NodeId 19 send a notification: NoOperation
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | Controller command is on a sleep queue wait for device. (Sleeping)
01-06-2016 13:34:41 | debug | Controller is busy: False
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | Controller command is on a sleep queue wait for device. (Sleeping)
01-06-2016 13:34:41 | debug | Controller is busy: False
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The controller is communicating with the other device to carry out the command. (InProgress)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The command has completed successfully. (Completed)
01-06-2016 13:34:41 | debug | Controller is busy: False
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The controller is communicating with the other device to carry out the command. (InProgress)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The command has completed successfully. (Completed)
01-06-2016 13:34:41 | debug | Controller is busy: False
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The controller is communicating with the other device to carry out the command. (InProgress)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The command has completed successfully. (Completed)
01-06-2016 13:34:41 | debug | Controller is busy: False
01-06-2016 13:34:41 | debug | The command is starting. (Starting)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:41 | debug | The controller is communicating with the other device to carry out the command. (InProgress)
01-06-2016 13:34:41 | debug | Controller is busy: True
01-06-2016 13:34:42 | debug | The command has completed successfully. (Completed)
01-06-2016 13:34:42 | debug | Controller is busy: False
01-06-2016 13:34:42 | info  | All the initialisation queries on a node have been completed. id:[1] model:[RaZberry Controller].
01-06-2016 13:34:42 | info  | write configuration file
01-06-2016 13:34:47 | debug | NodeId 19 send a notification: NoOperation
01-06-2016 13:34:51 | debug | NodeId 19 send a notification: NoOperation
01-06-2016 13:34:51 | debug | NodeId 19 send a notification: Dead
01-06-2016 13:34:51 | debug | Received Meter report from node 17: Energy=215.57kWh
01-06-2016 13:34:51 | debug | Received Meter report from node 17: Power=15.3W
01-06-2016 13:34:51 | debug | Push data to jeedom
01-06-2016 13:34:52 | info  | All the initialisation queries on a node have been completed. id:[17] model:[FGWPE Wall Plug].
01-06-2016 13:34:52 | info  | write configuration file
01-06-2016 13:34:53 | info  | All the initialisation queries on a node have been completed. id:[18] model:[FGWPE Wall Plug].
01-06-2016 13:34:53 | info  | write configuration file
01-06-2016 13:34:54 | info  | Openzwave network is awake: 11 nodes were found (7 are sleeping). All listening nodes are queried, but some sleeping nodes may be missing.
01-06-2016 13:34:54 | info  | Controller is: home_id: [0xe9bf5886] id: [1] name: [RaZberry Controller] product: [RaZberry Controller] capabilities: set(['primaryController']) library: [Static Controller version Z-Wave 3.42]
01-06-2016 13:34:54 | info  | Refresh configuration parameters will starting in 360 sec
01-06-2016 13:34:54 | info  | Refresh user values will starting in 120 sec
01-06-2016 13:34:54 | info  | Validate association groups will starting in 45 sec
01-06-2016 13:34:54 | debug | Perform network sanity test/check
01-06-2016 13:34:54 | debug | => Try recovering, presumed Dead, nodeId: 19
01-06-2016 13:34:54 | debug | Push data to jeedom
01-06-2016 13:35:04 | debug | Network sanity test/check completed!
01-06-2016 13:35:04 | info  | write configuration file

Une idée ?

[nechry]

le log des dépendance montre que tu installes l'ancienne version. tu es sur d'avoir mis à jour l'esclave?