Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

[Jeedom V3.1] Problèmes avec la mise à jour

De l'installation à l'utilisation venez discuter de JEEDOM au quotidien
Avatar de l’utilisateur
Mike27140
Timide
Messages : 21
Inscription : 13 avr. 2015, 19:10

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Mike27140 » 26 sept. 2017, 11:55

Bonjour,

j'ai visiblement un probleme different vue que la mise a jour ne se finalise pas sur mon jeedom DIY.

j'ai testé plusieur fois a plusieur moment et mon serveur Jeedom a bien access a internet.

voici le log si quelqu'un a une idée je suis plus que preneur :-)

Merci d'avance

[START UPDATE]
****Install/update jeedom from 3.0.9 (2017-09-26 11:50:29)****
Configuration : level : -1, mode : , version : , onlyThisVersion :
Send begin of update event...OK
Check rights...
OK
[START BACKUP]
***************Start of Jeedom backup at 2017-09-26 11:50:29***************
Send begin backup event...OK
Check database...Warning: Using a password on the command line interface can be insecure.
OK
Backup database...Warning: Using a password on the command line interface can be insecure.
OK
Persist cache :
OK
Create archive...
OK
Clean old backup...OK
Limit the total size of backups to 1500 Mo...
Remove : /usr/share/nginx/www/jeedom/core/php/../../backup/backup-DUMX-3.0.9-2017-09-26-00h59.tar.gz
OK
Name of backup : /usr/share/nginx/www/jeedom/core/php/../../backup/backup-DUMX-3.0.9-2017-09-26-11h50.tar.gz
Send end backup event...OK
Backup duration : 18s
***************Fin de la sauvegarde de Jeedom***************
[END BACKUP SUCCESS]
Disable all task.
... OK
Disable all scenario
................................. OK
Clean temporary file (tmp)...OK
Download url : https://github.com/jeedom/core/archive/releas.zip
Download in progress...--2017-09-26 11:50:51-- https://github.com/jeedom/core/archive/releas.zip
Resolving github.com (github.com)... 192.30.253.112, 192.30.253.113
Connecting to github.com (github.com)|192.30.253.112|:443... connected.
HTTP request sent, awaiting response...
302 Found
Location: https://codeload.github.com/jeedom/core/zip/releas [following]
--2017-09-26 11:50:51-- https://codeload.github.com/jeedom/core/zip/releas
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-09-26 11:50:52 ERROR 404: Not Found.
Enable scenario : OK
Enable task : OK
Error during install : Download failed please retry laterDetails : Array
(
)
[END UPDATE ERROR]
PHP Fatal error: Uncaught exception 'Exception' with message 'Download failed please retry later' in /usr/share/nginx/www/jeedom/install/install.php:160
Stack trace:
#0 {main}
thrown in /usr/share/nginx/www/jeedom/install/install.php on line 160
Jeedom (DIY)
Protocole Domotique : Blea, ESPEasy, Mochad X10, RfLink, RFXcom, Xiaomi Home, Z-Wave
Autres : SMS, Harmony Hub, Sonos, Amazon Dash, Camera, Netatmo, RTS, etc...

BetyOops
Timide
Messages : 107
Inscription : 13 avr. 2016, 14:35

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par BetyOops » 26 sept. 2017, 11:56

edreams a écrit :
26 sept. 2017, 11:03
@mamadtv: euh tu es sûr ? même un vieux plugin comme currentcost ? car celà fait 3 ans qu'il n'a jamais voulu répondre aux demandes d'utilisateurs sur le topic de ce plugin !
SI tu est sur que le plugin fonctionne, créé juste un fichier info.json dans le dossier plugin_info du CurrentCost et tout va réapparaître.

Code : Tout sélectionner

{
	"id" : "CurrentCost",
	"name" : "CurrentCost",
	"licence" : "AGPL",
	"author" : "Thomas MARTINEZ",
	"require" : "2.4",
	"category" : "organization"
}
Lenovo M720 Tiny - VMWare Debian 9 Jeedom DIY
Zwave - Bluetooth
Alexa Echo - Harmony Elite

steph034
Timide
Messages : 458
Inscription : 28 oct. 2015, 09:05

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par steph034 » 26 sept. 2017, 12:00

bon j'ai supprimé le plugin obsolete (datatransfert) et j'ai tjs l'info dans la log plugin, snif

Avatar de l’utilisateur
Zerat9w
Timide
Messages : 486
Inscription : 26 févr. 2015, 09:26
Localisation : Région Bordelaise

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Zerat9w » 26 sept. 2017, 12:04

steph034 a écrit :
26 sept. 2017, 12:00
bon j'ai supprimé le plugin obsolete (datatransfert) et j'ai tjs l'info dans la log plugin, snif
Idem même après un reboot et en plus il est bavard ça log souvent
Jeedom

La rétention de l'information est une forme de constipation du savoir.

Documentation - Trucs & Astuces - Charte

snow51
Timide
Messages : 77
Inscription : 09 juin 2015, 08:57

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par snow51 » 26 sept. 2017, 12:11

Mike27140 a écrit :
26 sept. 2017, 11:55
Bonjour,

j'ai visiblement un probleme different vue que la mise a jour ne se finalise pas sur mon jeedom DIY.

j'ai testé plusieur fois a plusieur moment et mon serveur Jeedom a bien access a internet.

voici le log si quelqu'un a une idée je suis plus que preneur :-)

Merci d'avance

[START UPDATE]
****Install/update jeedom from 3.0.9 (2017-09-26 11:50:29)****
Configuration : level : -1, mode : , version : , onlyThisVersion :
Send begin of update event...OK
Check rights...
OK
[START BACKUP]
***************Start of Jeedom backup at 2017-09-26 11:50:29***************
Send begin backup event...OK
Check database...Warning: Using a password on the command line interface can be insecure.
OK
Backup database...Warning: Using a password on the command line interface can be insecure.
OK
Persist cache :
OK
Create archive...
OK
Clean old backup...OK
Limit the total size of backups to 1500 Mo...
Remove : /usr/share/nginx/www/jeedom/core/php/../../backup/backup-DUMX-3.0.9-2017-09-26-00h59.tar.gz
OK
Name of backup : /usr/share/nginx/www/jeedom/core/php/../../backup/backup-DUMX-3.0.9-2017-09-26-11h50.tar.gz
Send end backup event...OK
Backup duration : 18s
***************Fin de la sauvegarde de Jeedom***************
[END BACKUP SUCCESS]
Disable all task.
... OK
Disable all scenario
................................. OK
Clean temporary file (tmp)...OK
Download url : https://github.com/jeedom/core/archive/releas.zip
Download in progress...--2017-09-26 11:50:51-- https://github.com/jeedom/core/archive/releas.zip
Resolving github.com (github.com)... 192.30.253.112, 192.30.253.113
Connecting to github.com (github.com)|192.30.253.112|:443... connected.
HTTP request sent, awaiting response...
302 Found
Location: https://codeload.github.com/jeedom/core/zip/releas [following]
--2017-09-26 11:50:51-- https://codeload.github.com/jeedom/core/zip/releas
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-09-26 11:50:52 ERROR 404: Not Found.
Enable scenario : OK
Enable task : OK
Error during install : Download failed please retry laterDetails : Array
(
)
[END UPDATE ERROR]
PHP Fatal error: Uncaught exception 'Exception' with message 'Download failed please retry later' in /usr/share/nginx/www/jeedom/install/install.php:160
Stack trace:
#0 {main}
thrown in /usr/share/nginx/www/jeedom/install/install.php on line 160
Le process de mise a jour essaye de télécharger le fichier releas.zip qui n'existe pas. La solution a été donnée dans les commentaires précédents.
RPI3 avec disque dur
MySensors : téléinfo, Température-humidité-ouverture
ESPEasy : Relais contact sec garage, Relais VMC
DIY Wifi : Capteur de consommation avec pinces ampèremétriques
Xiaomi : Roborock S50
BLEA : Mi Flora

Avatar de l’utilisateur
edreams
Actif
Messages : 928
Inscription : 01 déc. 2014, 11:57
Localisation : Près de Montpellier

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par edreams » 26 sept. 2017, 12:28

BetyOops a écrit :
26 sept. 2017, 11:56
edreams a écrit :
26 sept. 2017, 11:03
@mamadtv: euh tu es sûr ? même un vieux plugin comme currentcost ? car celà fait 3 ans qu'il n'a jamais voulu répondre aux demandes d'utilisateurs sur le topic de ce plugin !
SI tu est sur que le plugin fonctionne, créé juste un fichier info.json dans le dossier plugin_info du CurrentCost et tout va réapparaître.

Code : Tout sélectionner

{
	"id" : "CurrentCost",
	"name" : "CurrentCost",
	"licence" : "AGPL",
	"author" : "Thomas MARTINEZ",
	"require" : "2.4",
	"category" : "organization"
}
Merci pour le tuyau BetyOops !
* Jeedom VM sur Synology DS916+ 8Go/24To / Zwave AEON GEN5 / RfxTrx433E *

Matériel complet --> http://forum.jeedom.fr/memberlist.php?m ... ile&u=1001 <--

Avatar de l’utilisateur
kvb
Timide
Messages : 15
Inscription : 22 déc. 2016, 12:42

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par kvb » 26 sept. 2017, 12:51

Bonjour,

Idem pour moi, que faire SVP ?

[START UPDATE]
****Install/update jeedom from 3.0.9 (2017-09-26 12:46:03)****
Configuration : level : -1, mode : , version : , onlyThisVersion :
Send begin of update event...OK
Check rights...OK
[START BACKUP]
***************Start of Jeedom backup at 2017-09-26 12:46:04***************
Send begin backup event...OK
Check database...
OK
Backup database...
OK
Persist cache :
OK
Create archive...
OK
Clean old backup...OK
Limit the total size of backups to 500 Mo...
Remove : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-06h59.tar.gz
OK
Name of backup : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-12h46.tar.gz
Send end backup event...OK
Backup duration : 36s
***************Fin de la sauvegarde de Jeedom***************
[END BACKUP SUCCESS]
Disable all task OK
Disable all scenario............
.......................................
..............................................
................................ OK
Clean temporary file (tmp)...OK
Download url : https://github.com/jeedom/core/archive/releas.zip
Download in progress...converted 'https://github.com/jeedom/core/archive/releas.zip' (ANSI_X3.4-1968) -> 'https://github.com/jeedom/core/archive/releas.zip' (UTF-8)
--2017-09-26 10:46:44-- https://github.com/jeedom/core/archive/releas.zip
Resolving github.com (github.com)... 192.30.253.113, 192.30.253.112
Connecting to github.com (github.com)|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/jeedom/core/zip/releas [following]
converted 'https://codeload.github.com/jeedom/core/zip/releas' (ANSI_X3.4-1968) -> 'https://codeload.github.com/jeedom/core/zip/releas' (UTF-8)
--2017-09-26 10:46:45-- https://codeload.github.com/jeedom/core/zip/releas
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-09-26 10:46:45 ERROR 404: Not Found.
Enable scenario : OK
Enable task : OK
Error during install : Download failed please retry laterDetails : Array
(
)
[END UPDATE ERROR]
PHP Fatal error: Uncaught exception 'Exception' with message 'Download failed please retry later' in /var/www/html/install/install.php:160
Stack trace:
#0 {main}
thrown in /var/www/html/install/install.php on line 160

snow51
Timide
Messages : 77
Inscription : 09 juin 2015, 08:57

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par snow51 » 26 sept. 2017, 12:52

kvb a écrit :
26 sept. 2017, 12:51
Bonjour,

Idem pour moi, que faire SVP ?

[START UPDATE]
****Install/update jeedom from 3.0.9 (2017-09-26 12:46:03)****
Configuration : level : -1, mode : , version : , onlyThisVersion :
Send begin of update event...OK
Check rights...OK
[START BACKUP]
***************Start of Jeedom backup at 2017-09-26 12:46:04***************
Send begin backup event...OK
Check database...
OK
Backup database...
OK
Persist cache :
OK
Create archive...
OK
Clean old backup...OK
Limit the total size of backups to 500 Mo...
Remove : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-06h59.tar.gz
OK
Name of backup : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-12h46.tar.gz
Send end backup event...OK
Backup duration : 36s
***************Fin de la sauvegarde de Jeedom***************
[END BACKUP SUCCESS]
Disable all task OK
Disable all scenario............
.......................................
..............................................
................................ OK
Clean temporary file (tmp)...OK
Download url : https://github.com/jeedom/core/archive/releas.zip
Download in progress...converted 'https://github.com/jeedom/core/archive/releas.zip' (ANSI_X3.4-1968) -> 'https://github.com/jeedom/core/archive/releas.zip' (UTF-8)
--2017-09-26 10:46:44-- https://github.com/jeedom/core/archive/releas.zip
Resolving github.com (github.com)... 192.30.253.113, 192.30.253.112
Connecting to github.com (github.com)|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/jeedom/core/zip/releas [following]
converted 'https://codeload.github.com/jeedom/core/zip/releas' (ANSI_X3.4-1968) -> 'https://codeload.github.com/jeedom/core/zip/releas' (UTF-8)
--2017-09-26 10:46:45-- https://codeload.github.com/jeedom/core/zip/releas
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-09-26 10:46:45 ERROR 404: Not Found.
Enable scenario : OK
Enable task : OK
Error during install : Download failed please retry laterDetails : Array
(
)
[END UPDATE ERROR]
PHP Fatal error: Uncaught exception 'Exception' with message 'Download failed please retry later' in /var/www/html/install/install.php:160
Stack trace:
#0 {main}
thrown in /var/www/html/install/install.php on line 160
La réponse a été donnée page 2 à 8h41
RPI3 avec disque dur
MySensors : téléinfo, Température-humidité-ouverture
ESPEasy : Relais contact sec garage, Relais VMC
DIY Wifi : Capteur de consommation avec pinces ampèremétriques
Xiaomi : Roborock S50
BLEA : Mi Flora

Anonyme
Actif
Messages : 10082
Inscription : 09 août 2014, 12:15

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Anonyme » 26 sept. 2017, 12:53

Contenu supprimé à la demande de son auteur

caplam
Actif
Messages : 646
Inscription : 02 déc. 2014, 15:36

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par caplam » 26 sept. 2017, 13:01

Bon,
à part la mise à jour qui persiste à être affichée, j'ai résolu mes autres problèmes:

j'ai créé un fichier info.json pour le plugin maxcube
j'ai migré mon install vers apache
Entre temps il y a bien eu une dizaine de plugins à mettre à jour. Tous sans problème.
Je n'ai pas parcouru toutes les fonctionnalités (juste la timeline) mais ça semble ok.
Bravo pour le boulot.
Jeedom sur vm esxi stretch
Principaux plugins: eibd, homebridge, maxcube, icalendar

Avatar de l’utilisateur
kvb
Timide
Messages : 15
Inscription : 22 déc. 2016, 12:42

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par kvb » 26 sept. 2017, 13:19

snow51 a écrit :
26 sept. 2017, 12:52
kvb a écrit :
26 sept. 2017, 12:51
Bonjour,

Idem pour moi, que faire SVP ?

[START UPDATE]
****Install/update jeedom from 3.0.9 (2017-09-26 12:46:03)****
Configuration : level : -1, mode : , version : , onlyThisVersion :
Send begin of update event...OK
Check rights...OK
[START BACKUP]
***************Start of Jeedom backup at 2017-09-26 12:46:04***************
Send begin backup event...OK
Check database...
OK
Backup database...
OK
Persist cache :
OK
Create archive...
OK
Clean old backup...OK
Limit the total size of backups to 500 Mo...
Remove : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-06h59.tar.gz
OK
Name of backup : /var/www/html/core/php/../../backup/backup-kvb14-3.0.9-2017-09-26-12h46.tar.gz
Send end backup event...OK
Backup duration : 36s
***************Fin de la sauvegarde de Jeedom***************
[END BACKUP SUCCESS]
Disable all task OK
Disable all scenario............
.......................................
..............................................
................................ OK
Clean temporary file (tmp)...OK
Download url : https://github.com/jeedom/core/archive/releas.zip
Download in progress...converted 'https://github.com/jeedom/core/archive/releas.zip' (ANSI_X3.4-1968) -> 'https://github.com/jeedom/core/archive/releas.zip' (UTF-8)
--2017-09-26 10:46:44-- https://github.com/jeedom/core/archive/releas.zip
Resolving github.com (github.com)... 192.30.253.113, 192.30.253.112
Connecting to github.com (github.com)|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/jeedom/core/zip/releas [following]
converted 'https://codeload.github.com/jeedom/core/zip/releas' (ANSI_X3.4-1968) -> 'https://codeload.github.com/jeedom/core/zip/releas' (UTF-8)
--2017-09-26 10:46:45-- https://codeload.github.com/jeedom/core/zip/releas
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2017-09-26 10:46:45 ERROR 404: Not Found.
Enable scenario : OK
Enable task : OK
Error during install : Download failed please retry laterDetails : Array
(
)
[END UPDATE ERROR]
PHP Fatal error: Uncaught exception 'Exception' with message 'Download failed please retry later' in /var/www/html/install/install.php:160
Stack trace:
#0 {main}
thrown in /var/www/html/install/install.php on line 160
La réponse a été donnée page 2 à 8h41
OK merci, mais où et comment il faut modifier cette commande ?
Désolé mais je ne sais pas, c'est pas si évident que ça !

benj29
Actif
Messages : 3983
Inscription : 26 mars 2017, 09:57
Contact :

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par benj29 » 26 sept. 2017, 13:20

benj29 a écrit :
26 sept. 2017, 11:50
Bonjour,

Update de Jeedom en 3.1 ce matin, tout semble bon.
Jusqu'au moment où je me rends compte que toutes mes températures Xiaomi sont décalées de 2h en avance :) !
Retour vers le futur, Xiaomi ? Non... tout jeedom en fait. Que ce soit mes températures de nodemcu, l'état des mes capteurs chacon etc...
Suis-je le seul ? (à 11h45 il est 13h45).

Je précise que l'heure de mon Jeedom est bien à 11h45... (en haut à droite).
Un simple reboot, tout est rentré dans l'ordre.
Si cela peut aider du monde dans le même cas.

Avatar de l’utilisateur
Mike27140
Timide
Messages : 21
Inscription : 13 avr. 2015, 19:10

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Mike27140 » 26 sept. 2017, 13:38

snow51 a écrit :
26 sept. 2017, 09:41
Pour ceux qui ont le soucis de mise à jour qui ne s'effectue pas il faut modifier le fichier install/install.php

$url = 'https://github.com/jeedom/core/archive/releas.zip';

devrait être

$url = 'https://github.com/jeedom/core/archive/' . config::byKey('core::branch') . '.zip';
Merci cela à corrigé le probleme :-)
Jeedom (DIY)
Protocole Domotique : Blea, ESPEasy, Mochad X10, RfLink, RFXcom, Xiaomi Home, Z-Wave
Autres : SMS, Harmony Hub, Sonos, Amazon Dash, Camera, Netatmo, RTS, etc...

steph034
Timide
Messages : 458
Inscription : 28 oct. 2015, 09:05

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par steph034 » 26 sept. 2017, 13:43

effectivement petite recherche de maj ce midi et de nombreux plugin sont mis à jour, tout est nickel de mon coté à part les restes du vieux plugin supprimé mais qui pollue pas mal les logs car tres bavard.
Bravo pour le job réalisé

Avatar de l’utilisateur
Sshafi
Actif
Messages : 3882
Inscription : 01 juil. 2014, 16:08
Localisation : Albi

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Sshafi » 26 sept. 2017, 13:55

steph034 a écrit :effectivement petite recherche de maj ce midi et de nombreux plugin sont mis à jour, tout est nickel de mon coté à part les restes du vieux plugin supprimé mais qui pollue pas mal les logs car tres bavard.
Bravo pour le job réalisé
Dans quels logs ? Et tu peux en copier un bout stp

From Tapatruc !

??? Menfin ...
VM ESXi # Aeon Lab Gen5 | RFXtrx433E | ...
Trucs & Astuces

Avatar de l’utilisateur
Zerat9w
Timide
Messages : 486
Inscription : 26 févr. 2015, 09:26
Localisation : Région Bordelaise

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Zerat9w » 26 sept. 2017, 14:00

Sshafi a écrit :
26 sept. 2017, 13:55
steph034 a écrit :effectivement petite recherche de maj ce midi et de nombreux plugin sont mis à jour, tout est nickel de mon coté à part les restes du vieux plugin supprimé mais qui pollue pas mal les logs car tres bavard.
Bravo pour le job réalisé
Dans quels logs ? Et tu peux en copier un bout stp

From Tapatruc !
@Sshafi, j'ai le même bug. Le plugin supprimé via le centre de mise à jour.

C'est dans le log plugin
Capture.PNG
Capture.PNG (125 Kio) Consulté 4409 fois
Même après un reboot ça continue

Visiblement toutes les données du plugin supprimé sont présentes dans la base encore.
Jeedom

La rétention de l'information est une forme de constipation du savoir.

Documentation - Trucs & Astuces - Charte

steph034
Timide
Messages : 458
Inscription : 28 oct. 2015, 09:05

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par steph034 » 26 sept. 2017, 14:02

oui c'est bien cela, c'est dans la log Plugin, même message pour moi, sur le même plugin.
J'ai supprimé moi aussi celui ci via le centre de mise à jour (il n'y a que là qu'il était encore visible) et malgré moi aussi un reboot, tjs bcp de logs indiquant l'erreur.

snow51
Timide
Messages : 77
Inscription : 09 juin 2015, 08:57

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par snow51 » 26 sept. 2017, 14:04

kvb a écrit :
26 sept. 2017, 13:19
OK merci, mais où et comment il faut modifier cette commande ?
Désolé mais je ne sais pas, c'est pas si évident que ça !
Avec un outil comme filezilla sur pc ou cyberduck sur mac tu te connectes en sftp a ta box jeedom et tu vas modifier le fichier dans /var/www/install/
RPI3 avec disque dur
MySensors : téléinfo, Température-humidité-ouverture
ESPEasy : Relais contact sec garage, Relais VMC
DIY Wifi : Capteur de consommation avec pinces ampèremétriques
Xiaomi : Roborock S50
BLEA : Mi Flora

parrain27240
Actif
Messages : 1629
Inscription : 24 juil. 2015, 20:15

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par parrain27240 » 26 sept. 2017, 14:07

bon mes messages sur le fofo marche une fois sur deux .
donc je reprend toujours aucun affichage sur aucune page que se soit dash plugin log y'a que la page de mise a jour qui marche et a moitie .
tous marche par domo-widget .
je peut vous donner aucun logs vu que la page et vide .

Avatar de l’utilisateur
Sshafi
Actif
Messages : 3882
Inscription : 01 juil. 2014, 16:08
Localisation : Albi

Re: [Jeedom V3.1] Problèmes avec la mise à jour

Message par Sshafi » 26 sept. 2017, 14:12

@kvb : essaye avant de faire une maj jeedom seulement forcée stp

From Tapatruc !

??? Menfin ...
VM ESXi # Aeon Lab Gen5 | RFXtrx433E | ...
Trucs & Astuces

Verrouillé

Revenir vers « Utilisation »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 8 invités