[Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Cela ne vient pas du plugin mais du RFLink. Tu as dû activer un mode debug
Avec RFLink Loader tu peux le désactiver, ou avec cette commande dans "Envoi de données" sur la page de configuration du plugin : 10;rfdebug=off;
Avec RFLink Loader tu peux le désactiver, ou avec cette commande dans "Envoi de données" sur la page de configuration du plugin : 10;rfdebug=off;
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Merci c'est beaucoup mieux.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonjour, j'ai un problème depuis plusieurs semaines, je n'arrive pas à faire fonctionner mon Rflink sur ma Jeedom Smart. Suis-je le seul dans ce cas ?
Code : Tout sélectionner
Building dependency tree...
Reading state information...
lsb-release is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
W: Duplicate sources.list entry http://ftp.debian.org/debian/ jessie-proposed-updates/non-free arm64 Packages (/var/lib/apt/lists/ftp.debian.org_debian_dists_jessie-proposed-updates_non-free_binary-arm64_Packages)
W: You may want to run apt-get update to correct these problems
KO, version obsolète à upgrader
Suppression du Nodejs existant et installation du paquet recommandé
Reading package lists...
Building dependency tree...
Reading state information...
Package 'npm' is not installed, so not removed
Package 'nodejs' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
dependencies.sh: 32: [: aarch64: unexpected operator
Utilisation du dépot officiel
## Installing the NodeSource Node.js 8.x LTS Carbon repo...
## Populating apt-get cache...
+ apt-get update
Ign http://repo.jeedom.com ./ InRelease
Hit http://www.deb-multimedia.org jessie InRelease
Ign http://ftp.debian.org jessie InRelease
Ign http://repo.jeedom.com ./ Release.gpg
Hit http://security.debian.org jessie/updates InRelease
Hit http://ftp.debian.org jessie-updates InRelease
Hit http://ftp.debian.org jessie-backports InRelease
Hit http://ftp.debian.org jessie-proposed-updates InRelease
Hit http://repo.jeedom.com ./ Release
Ign http://repo.jeedom.com ./ Packages/DiffIndex
Hit http://ftp.debian.org jessie Release.gpg
Hit http://ftp.debian.org jessie Release
Hit http://ftp.debian.org jessie-updates/contrib Sources
Hit http://security.debian.org jessie/updates/main Sources
Get:1 http://ftp.debian.org jessie-updates/main arm64 Packages/DiffIndex [11.8 kB]
Hit http://security.debian.org jessie/updates/contrib Sources
Hit http://ftp.debian.org jessie-updates/contrib arm64 Packages
Hit http://security.debian.org jessie/updates/non-free Sources
Get:2 http://ftp.debian.org jessie-updates/non-free arm64 Packages/DiffIndex [736 B]
Hit http://ftp.debian.org jessie-updates/contrib Translation-en
Hit http://oph.mdrjr.net all InRelease
Get:3 http://ftp.debian.org jessie-updates/main Translation-en/DiffIndex [3,688 B]
Ign http://repo.jeedom.com ./ Translation-en_US
Hit http://oph.mdrjr.net jessie InRelease
Get:4 http://ftp.debian.org jessie-updates/non-free Translation-en/DiffIndex [736 B]
Ign http://repo.jeedom.com ./ Translation-en
Hit http://ftp.debian.org jessie-updates/main Sources
Hit http://repo.jeedom.com ./ Packages
Get:5 http://ftp.debian.org jessie-backports/main Sources/DiffIndex [27.8 kB]
Get:6 http://oph.mdrjr.net all/c2 arm64 Packages
Get:7 http://ftp.debian.org jessie-backports/contrib Sources/DiffIndex [27.8 kB]
Get:8 http://oph.mdrjr.net all/main arm64 Packages
Get:9 http://ftp.debian.org jessie-backports/non-free Sources/DiffIndex [26.0 kB]
Hit http://oph.mdrjr.net all/c2 arm64 Packages
Get:10 http://ftp.debian.org jessie-backports/main arm64 Packages/DiffIndex [27.8 kB]
Get:11 http://oph.mdrjr.net all/testing arm64 Packages
Hit http://oph.mdrjr.net all/main arm64 Packages
Get:12 http://ftp.debian.org jessie-backports/contrib arm64 Packages/DiffIndex [23.9 kB]
Get:13 http://oph.mdrjr.net all/c2 Translation-en_US [324 B]
Get:14 http://ftp.debian.org jessie-backports/non-free arm64 Packages/DiffIndex [8,530 B]
Get:15 http://ftp.debian.org jessie-backports/contrib Translation-en/DiffIndex [7,960 B]
Hit http://oph.mdrjr.net all/testing arm64 Packages
Get:16 http://ftp.debian.org jessie-backports/main Translation-en/DiffIndex [27.8 kB]
Get:17 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:18 http://ftp.debian.org jessie-backports/non-free Translation-en/DiffIndex [19.1 kB]
Get:19 http://oph.mdrjr.net all/main Translation-en_US [326 B]
Get:20 http://ftp.debian.org jessie-proposed-updates/contrib Sources/DiffIndex [7,762 B]
Get:21 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:22 http://ftp.debian.org jessie-proposed-updates/non-free Sources/DiffIndex [18.0 kB]
Get:23 http://oph.mdrjr.net all/testing Translation-en_US [329 B]
Get:24 http://ftp.debian.org jessie-proposed-updates/main Sources/DiffIndex [27.8 kB]
Get:25 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:26 http://ftp.debian.org jessie-proposed-updates/contrib arm64 Packages/DiffIndex [4,948 B]
Get:27 http://ftp.debian.org jessie-proposed-updates/non-free arm64 Packages/DiffIndex [8,254 B]
Get:28 http://oph.mdrjr.net jessie/backports arm64 Packages
Get:29 http://ftp.debian.org jessie-proposed-updates/main arm64 Packages/DiffIndex [27.8 kB]
Get:30 http://oph.mdrjr.net jessie/main arm64 Packages
Get:31 http://ftp.debian.org jessie-proposed-updates/contrib Translation-en/DiffIndex [8,392 B]
Get:32 http://ftp.debian.org jessie-proposed-updates/main Translation-en/DiffIndex [27.8 kB]
Get:33 http://oph.mdrjr.net jessie/backports Translation-en_US [334 B]
Get:34 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:35 http://ftp.debian.org jessie-proposed-updates/non-free Translation-en/DiffIndex [18.0 kB]
Get:36 http://oph.mdrjr.net jessie/main Translation-en_US [329 B]
Hit http://ftp.debian.org jessie-updates/non-free Sources
Get:37 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Hit http://oph.mdrjr.net jessie/backports arm64 Packages
Get:38 http://oph.mdrjr.net all/c2 Translation-en_US [324 B]
Get:39 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Hit http://oph.mdrjr.net jessie/main arm64 Packages
Get:40 http://oph.mdrjr.net all/main Translation-en_US [326 B]
Hit http://ftp.debian.org jessie/main Sources
Get:41 http://oph.mdrjr.net all/main Translation-en [323 B]
Hit http://ftp.debian.org jessie/contrib Sources
Hit http://ftp.debian.org jessie/non-free Sources
Get:42 http://oph.mdrjr.net all/testing Translation-en_US [329 B]
Hit http://ftp.debian.org jessie/main arm64 Packages
Hit http://ftp.debian.org jessie/contrib arm64 Packages
Get:43 http://oph.mdrjr.net all/testing Translation-en [326 B]
Hit http://ftp.debian.org jessie/non-free arm64 Packages
Hit http://ftp.debian.org jessie/contrib Translation-en
Get:44 http://oph.mdrjr.net jessie/backports Translation-en_US [334 B]
Hit http://ftp.debian.org jessie/main Translation-en
Hit http://ftp.debian.org jessie/non-free Translation-en
Get:45 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:46 http://oph.mdrjr.net jessie/main Translation-en_US [329 B]
Get:47 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:48 http://oph.mdrjr.net all/c2 Translation-en_US [324 B]
Get:49 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:50 http://oph.mdrjr.net all/main Translation-en_US [326 B]
Get:51 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:52 http://oph.mdrjr.net all/testing Translation-en_US [329 B]
Get:53 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:54 http://oph.mdrjr.net jessie/backports Translation-en_US [334 B]
Get:55 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:56 http://oph.mdrjr.net jessie/main Translation-en_US [329 B]
Get:57 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:58 http://oph.mdrjr.net all/c2 Translation-en_US [324 B]
Get:59 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:60 http://oph.mdrjr.net all/main Translation-en_US [326 B]
Get:61 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:62 http://oph.mdrjr.net all/testing Translation-en_US [329 B]
Get:63 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:64 http://oph.mdrjr.net jessie/backports Translation-en_US [334 B]
Get:65 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:66 http://oph.mdrjr.net jessie/main Translation-en_US [329 B]
Get:67 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:68 http://oph.mdrjr.net all/c2 Translation-en_US [324 B]
Ign http://oph.mdrjr.net all/c2 Translation-en_US
Get:69 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Ign http://oph.mdrjr.net all/c2 Translation-en
Get:70 http://oph.mdrjr.net all/main Translation-en_US [326 B]
Ign http://oph.mdrjr.net all/main Translation-en_US
Get:71 http://oph.mdrjr.net all/main Translation-en [323 B]
Ign http://oph.mdrjr.net all/main Translation-en
Get:72 http://oph.mdrjr.net all/testing Translation-en_US [329 B]
Ign http://oph.mdrjr.net all/testing Translation-en_US
Get:73 http://oph.mdrjr.net all/testing Translation-en [326 B]
Ign http://oph.mdrjr.net all/testing Translation-en
Get:74 http://oph.mdrjr.net jessie/backports Translation-en_US [334 B]
Ign http://oph.mdrjr.net jessie/backports Translation-en_US
Get:75 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Ign http://oph.mdrjr.net jessie/backports Translation-en
Get:76 http://oph.mdrjr.net jessie/main Translation-en_US [329 B]
Ign http://oph.mdrjr.net jessie/main Translation-en_US
Get:77 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Ign http://oph.mdrjr.net jessie/main Translation-en
Fetched 363 kB in 11s (31.5 kB/s)
W: Failed to fetch http://security.debian.org/dists/jessie/updates/InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)
W: Failed to fetch http://www.deb-multimedia.org/dists/jessie/InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)
E: Some index files failed to download. They have been ignored, or old ones used instead.
Error executing command, exiting
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
nodejs
0 upgraded, 1 newly installed, 0 to remove and 120 not upgraded.
Need to get 12.0 MB of archives.
After this operation, 60.4 MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
nodejs
W: Duplicate sources.list entry http://ftp.debian.org/debian/ jessie-proposed-updates/non-free arm64 Packages (/var/lib/apt/lists/ftp.debian.org_debian_dists_jessie-proposed-updates_non-free_binary-arm64_Packages)
W: You may want to run apt-get update to correct these problems
E: There are problems and -y was used without --force-yes
dependencies.sh: 1: dependencies.sh: nodejs: not found
Version actuelle :
dependencies.sh: 54: dependencies.sh: npm: not found
chown: cannot access ‘node_modules’: No such file or directory
Fin de l'installation
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Comme indiqué, un sudo apt-get update devrait t'aider.
S'il y a un mauvais référentiel enregistré il faut le supprimer.
Tu peux enchaîner sur un sudo apt-get upgrade.
Vérifie également la synchronisation horaire de ta box (heure + fuseau horaire).
S'il y a un mauvais référentiel enregistré il faut le supprimer.
Tu peux enchaîner sur un sudo apt-get upgrade.
Vérifie également la synchronisation horaire de ta box (heure + fuseau horaire).
Z83II + zstick Aeotec sw090 (51 nœuds Z-Wave), Clé 3G Huawei E172, rfplayer (portail, Pergola Somfy), Station météo Netatmo, Xiaomi (Gateway 31 nœuds, Aspi v1, lampe de chevet v1 et v2, rideau), nut, Google Home, Alexa, Squeezebox, Tondeuse Worx
-
- Timide
- Messages : 25
- Inscription : 14 oct. 2015, 15:22
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonjour à tous.
Ma version de jeedom est 3.2.11
Le plugin rflink est en version du 2018-06-23 01:49:53 et le firmaware est en version R48
Voici mon problème. J’ai une télécommande Dio qui pilote un module de la même marque. Quand j’appuis sur 1, la lumière s’allume. Quand j’appuis sur 0 la lumière s’éteint.
J’ai ajouté dans jeedom l’exécution d’un scenario avec déclenchement sur l’etat de l’objet rflink lié à la telecommande. Ce scenario lance "dans 10min => éteint la lumière" si l'etat est à 1. Cette minuterie fonctionne correctement.
Maintenant je voudrais que quand la lumière est allumée et que j’appuie sur 1, ça désactive le DANS afin de désactiver l’extinction automatique de la lumière. Pour ça j’ai configuré l’état de l’objet rlink pour qu’il répète toujours l’évènement. Et là problème. Le scenario s’exécute systématiquement 2 fois en parallèle. Je précise que le mode lancement multiple du scenario n’est pas activé.
Voilà donc mes questions :
- Y a-t-il un problème avec la répétition sur un nœud RFLink
- Avez-vous une idée pour arriver à mes fins en contournant ce problème.
Merci d’avance pour votre aide
Ma version de jeedom est 3.2.11
Le plugin rflink est en version du 2018-06-23 01:49:53 et le firmaware est en version R48
Voici mon problème. J’ai une télécommande Dio qui pilote un module de la même marque. Quand j’appuis sur 1, la lumière s’allume. Quand j’appuis sur 0 la lumière s’éteint.
J’ai ajouté dans jeedom l’exécution d’un scenario avec déclenchement sur l’etat de l’objet rflink lié à la telecommande. Ce scenario lance "dans 10min => éteint la lumière" si l'etat est à 1. Cette minuterie fonctionne correctement.
Maintenant je voudrais que quand la lumière est allumée et que j’appuie sur 1, ça désactive le DANS afin de désactiver l’extinction automatique de la lumière. Pour ça j’ai configuré l’état de l’objet rlink pour qu’il répète toujours l’évènement. Et là problème. Le scenario s’exécute systématiquement 2 fois en parallèle. Je précise que le mode lancement multiple du scenario n’est pas activé.
Voilà donc mes questions :
- Y a-t-il un problème avec la répétition sur un nœud RFLink
- Avez-vous une idée pour arriver à mes fins en contournant ce problème.
Merci d’avance pour votre aide
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Salut wateresist,
Je n'ai pas si c'est vraiment un problème RFLink et il faudrait pouvoir regarder plus en détails. Par contre, souvent les télécommandes en 433 envoient plusieurs fois la même commande à la suite => tu dois pouvoir le voir avec les logs en mode debug si le boitier RFLink envoie plusieurs fois la même trame, et là pas grand chose à faire.
Quelques pistes :
- Dans un scenario, tu peux utiliser la commande inat qui supprime les blocs DANS/A programmés.
- Pour certaines commandes (je crois que c'était pour éviter une répétition mais plus certain), j'utilise collectdate de la manière suivante dans un virtuel, peut-être que ça peut s'adapter dans le scénario :
A noter que dans l'objet rflink j'ai mis dans gestion des valeurs une valeur de retour à 0 et une durée avant retour de 1 min qui est le minimum et sera peut-être trop juste pour.
Attention, on est plusieurs à se demander s'il n'y a pas un bug depuis quelques temps sur la fonction (voir ici).
Je n'ai pas si c'est vraiment un problème RFLink et il faudrait pouvoir regarder plus en détails. Par contre, souvent les télécommandes en 433 envoient plusieurs fois la même commande à la suite => tu dois pouvoir le voir avec les logs en mode debug si le boitier RFLink envoie plusieurs fois la même trame, et là pas grand chose à faire.
Quelques pistes :
- Dans un scenario, tu peux utiliser la commande inat qui supprime les blocs DANS/A programmés.
- Pour certaines commandes (je crois que c'était pour éviter une répétition mais plus certain), j'utilise collectdate de la manière suivante dans un virtuel, peut-être que ça peut s'adapter dans le scénario :
Code : Tout sélectionner
(#timestamp#-collectDate(#[RFLink - 433][Chuango_574ebc][BAL - Fente]#,'U')<10)*(#[RFLink - 433][Chuango_574ebc][BAL - Fente]#)
A noter que dans l'objet rflink j'ai mis dans gestion des valeurs une valeur de retour à 0 et une durée avant retour de 1 min qui est le minimum et sera peut-être trop juste pour.
Attention, on est plusieurs à se demander s'il n'y a pas un bug depuis quelques temps sur la fonction (voir ici).
-
- Timide
- Messages : 25
- Inscription : 14 oct. 2015, 15:22
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Merci Seb82.
En passant en mode debug on voit effectivement deux fois chaque commande. Une fois en debug, une fois en info. Cela veut il dire que l'info passe deux fois. Ca expliquerait la double execution du scenario.
Je vais essayer de modifier mon scenario et voir ce que je peux faire avec collectdata.
Concernant le retour à 0 1 minutes sera beaucoup trop long pour mon cas.
Merci pour tes idées.
En passant en mode debug on voit effectivement deux fois chaque commande. Une fois en debug, une fois en info. Cela veut il dire que l'info passe deux fois. Ca expliquerait la double execution du scenario.
Je vais essayer de modifier mon scenario et voir ce que je peux faire avec collectdata.
Concernant le retour à 0 1 minutes sera beaucoup trop long pour mon cas.
Merci pour tes idées.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
bonjour,
j'ai ajouté un bouton de sonnette dans rflink, ca fonctionne mais je ne comprends pas toutes les commandes.... Quand j'appuie j'ai d'abord eu statut 0 et ALLON0 et remet l'etat du statut a 0
mais maintenant j'ai 2 autres commande qui sont apparues, ON1 OFF1 et statut 1 je ne comprends pas a quoi ca sert.
Je voudrais faire un scénario sur action de ce bouton. Je dois utiliser quoi ? Je suppose que pour que ca fonctionne il faut mettre la commande ALL0 a chaque fin de scénario ?
j'ai ajouté un bouton de sonnette dans rflink, ca fonctionne mais je ne comprends pas toutes les commandes.... Quand j'appuie j'ai d'abord eu statut 0 et ALLON0 et remet l'etat du statut a 0
mais maintenant j'ai 2 autres commande qui sont apparues, ON1 OFF1 et statut 1 je ne comprends pas a quoi ca sert.
Je voudrais faire un scénario sur action de ce bouton. Je dois utiliser quoi ? Je suppose que pour que ca fonctionne il faut mettre la commande ALL0 a chaque fin de scénario ?
- Pièces jointes
-
- f4457ff5-1801-4c96-8a4e-78ee8fcd000e.jpeg (5.41 Kio) Consulté 1539 fois
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
J'aimerais creer dans un virtuel un peu à l'iamge de cau'il y a dans l'onglet sante avec la date et l'heure de mise a jour de mes elements RFLINK. Savez vous si c'est possible ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonsoir,
suite à une mise à jour de ce soir, j'ai ce message : "Service ne répond pas{"state":"ok","result":null}"
Je viens de passer jeedom de 3.1.7 à 3.2.3 avec le plugin rflink updaté en même temps à la version du "2018-06-23 01:49:53".
Je n'ai rien touché à ma config et le plugin ne trouve plus mon rflink sur /dev/tty/USB0
J'obtiens le message d'erreur suivant:
Quelqu'un aurait une idée???
D'avance merci.
suite à une mise à jour de ce soir, j'ai ce message : "Service ne répond pas{"state":"ok","result":null}"
Je viens de passer jeedom de 3.1.7 à 3.2.3 avec le plugin rflink updaté en même temps à la version du "2018-06-23 01:49:53".
Je n'ai rien touché à ma config et le plugin ne trouve plus mon rflink sur /dev/tty/USB0
J'obtiens le message d'erreur suivant:
Code : Tout sélectionner
Sun Sep 02 2018 21:00:20 GMT+0000 (UTC) - Jeedom url : http://127.0.0.1:80/plugins/rflink/core/api/rflink.php?apikey=*A*P*I*K*E*Y*, gwAddress : /dev/ttyUSB0
/var/www/html/plugins/rflink/resources/rflink.js:148
var gw = new Telnet();
^
SyntaxError: Identifier 'gw' has already been declared
at launchGateway (/var/www/html/plugins/rflink/resources/rflink.js:64:23)
at Object.<anonymous> (/var/www/html/plugins/rflink/resources/rflink.js:178:1)
at Module._compile (module.js:413:34)
at Object.Module._extensions..js (module.js:422:10)
at Module.load (module.js:357:32)
at Function.Module._load (module.js:314:12)
at Function.Module.runMain (module.js:447:10)
at startup (node.js:148:18)
at node.js:405:3
D'avance merci.
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonjour,
N'en ayant plus l'utilité, je mets à la vente mon RFLink 433.92 / Arduino / Dipole / USB cable acheté chez Nodo 57,70€ en avril 2017.
Faire offre en MP !
N'en ayant plus l'utilité, je mets à la vente mon RFLink 433.92 / Arduino / Dipole / USB cable acheté chez Nodo 57,70€ en avril 2017.
Faire offre en MP !
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Il y a un fil pour les annonces
viewforum.php?f=73
viewforum.php?f=73
1 NUC & 1 RPI3/Msata V3.3.31, EnOcean, Z-wave,
Rflink, IPX800V3, carte 8 rl IP, IR_V3, Xiaomi gateway, JPI/APK/tel Android dédié, Somfy RTS, Rf433Mhz, Xiaomi, Bm280 , Broadlink,WifiLights
Rflink, IPX800V3, carte 8 rl IP, IR_V3, Xiaomi gateway, JPI/APK/tel Android dédié, Somfy RTS, Rf433Mhz, Xiaomi, Bm280 , Broadlink,WifiLights
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Bonsoir,
suite à ma question 3 posts plus haut, je n'arrive pas à réinstaller les dépendances, la date d'install ne change pas...
Je poste dans la section Rflink mais le soucis est peut-être plus général?
Le démon ESPEASY est HS aussi. Ai-je un soucis avec nodejs?
Quel peut-être le soucis? D'avance merci pour votre aide!
suite à ma question 3 posts plus haut, je n'arrive pas à réinstaller les dépendances, la date d'install ne change pas...
Je poste dans la section Rflink mais le soucis est peut-être plus général?
Code : Tout sélectionner
Début de l'installation
converted 'https://raw.githubusercontent.com/lunarok/jeedom_nodejs/master/nodejs.sh' (ANSI_X3.4-1968) -> 'https://raw.githubusercontent.com/lunarok/jeedom_nodejs/master/nodejs.sh' (UTF-8)
--2018-09-03 20:22:44-- https://raw.githubusercontent.com/lunarok/jeedom_nodejs/master/nodejs.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.120.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.120.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1458 (1.4K) [text/plain]
Saving to: 'dependencies.sh'
0K . 100% 12.9M=0s
2018-09-03 20:22:45 (12.9 MB/s) - 'dependencies.sh' saved [1458/1458]
Version actuelle : 5
Hit http://archive.raspberrypi.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie InRelease
Get:1 http://deb.debian.org jessie-backports InRelease [166 kB]
Hit https://deb.nodesource.com jessie InRelease
Get:2 https://deb.nodesource.com jessie/main Sources [764 B]
Get:3 http://deb.debian.org jessie-backports-sloppy InRelease [54.5 kB]
Get:4 https://deb.nodesource.com jessie/main armhf Packages [968 B]
Ign http://deb.debian.org jessie-backports InRelease
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:6 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign http://deb.debian.org jessie-backports-sloppy InRelease
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Get:7 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:8 https://deb.nodesource.com jessie/main Translation-en [162 B]
Hit http://archive.raspberrypi.org jessie/ui armhf Packages
Get:9 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Get:10 http://deb.debian.org jessie-backports/contrib Translation-en [6946 B]
Get:11 http://deb.debian.org jessie-backports/main Translation-en [628 kB]
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Get:12 http://deb.debian.org jessie-backports-sloppy/contrib Translation-en [2623 B]
Hit http://mirrordirector.raspbian.org jessie/contrib armhf Packages
Get:13 http://deb.debian.org jessie-backports-sloppy/main Translation-en [29.8 kB]
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Ign http://archive.raspberrypi.org jessie/main Translation-en
Hit http://mirrordirector.raspbian.org jessie/rpi armhf Packages
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Get:14 http://deb.debian.org jessie-backports/main armhf Packages [875 kB]
Get:15 http://deb.debian.org jessie-backports/contrib armhf Packages [7980 B]
Get:16 http://deb.debian.org jessie-backports-sloppy/main armhf Packages [25.9 kB]
Get:17 http://deb.debian.org jessie-backports-sloppy/contrib armhf Packages [2480 B]
Err http://deb.debian.org jessie-backports/nonfree armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Ign http://deb.debian.org jessie-backports/nonfree Translation-en
Err http://deb.debian.org jessie-backports-sloppy/non armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Err http://deb.debian.org jessie-backports-sloppy/free armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://deb.debian.org jessie-backports-sloppy/free Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://deb.debian.org jessie-backports-sloppy/non Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Fetched 222 kB in 8s (27.4 kB/s)
W: GPG error: http://deb.debian.org jessie-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
W: GPG error: http://deb.debian.org jessie-backports-sloppy InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports/nonfree/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports-sloppy/non/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports-sloppy/free/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists...
Building dependency tree...
Reading state information...
lsb-release is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
KO, version obsolète à upgrader
Suppression du Nodejs existant et installation du paquet recommandé
Reading package lists...
Building dependency tree...
Reading state information...
Package 'npm' is not installed, so not removed
The following packages will be REMOVED:
nodejs* rlwrap*
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
After this operation, 38.7 MB disk space will be freed.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 50874 files and directories currently installed.)
Removing nodejs (5.12.0-1nodesource1~jessie1) ...
Purging configuration files for nodejs (5.12.0-1nodesource1~jessie1) ...
dpkg: warning: while removing nodejs, directory '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/generator' not empty so not removed
Removing rlwrap (0.41-1) ...
Processing triggers for man-db (2.7.5-1~bpo8+1) ...
dependencies.sh: 32: [: armv7l: unexpected operator
Utilisation du dépot officiel
## Installing the NodeSource Node.js 8.x LTS Carbon repo...
## Populating apt-get cache...
+ apt-get update
Hit http://archive.raspberrypi.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie InRelease
Hit https://deb.nodesource.com jessie InRelease
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Get:1 https://deb.nodesource.com jessie/main Sources [764 B]
Hit http://archive.raspberrypi.org jessie/ui armhf Packages
Get:2 http://deb.debian.org jessie-backports InRelease [166 kB]
Get:3 https://deb.nodesource.com jessie/main armhf Packages [968 B]
Get:4 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:5 https://deb.nodesource.com jessie/main Translation-en [162 B]
Get:6 http://deb.debian.org jessie-backports-sloppy InRelease [54.5 kB]
Get:7 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign http://deb.debian.org jessie-backports InRelease
Get:8 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign http://deb.debian.org jessie-backports-sloppy InRelease
Get:9 https://deb.nodesource.com jessie/main Translation-en [162 B]
Ign https://deb.nodesource.com jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Hit http://mirrordirector.raspbian.org jessie/contrib armhf Packages
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Get:10 http://deb.debian.org jessie-backports/contrib Translation-en [6946 B]
Hit http://mirrordirector.raspbian.org jessie/rpi armhf Packages
Get:11 http://deb.debian.org jessie-backports/main Translation-en [628 kB]
Get:12 http://deb.debian.org jessie-backports-sloppy/contrib Translation-en [2623 B]
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Get:13 http://deb.debian.org jessie-backports-sloppy/main Translation-en [29.8 kB]
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Get:14 http://deb.debian.org jessie-backports/main armhf Packages [875 kB]
Get:15 http://deb.debian.org jessie-backports/contrib armhf Packages [7980 B]
Get:16 http://deb.debian.org jessie-backports-sloppy/main armhf Packages [25.9 kB]
Get:17 http://deb.debian.org jessie-backports-sloppy/contrib armhf Packages [2480 B]
Err http://deb.debian.org jessie-backports/nonfree armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Ign http://deb.debian.org jessie-backports/nonfree Translation-en
Err http://deb.debian.org jessie-backports-sloppy/non armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Err http://deb.debian.org jessie-backports-sloppy/free armhf Packages
404 Not Found [IP: 2a04:4e42:1d::204 80]
Ign http://deb.debian.org jessie-backports-sloppy/free Translation-en
Ign http://deb.debian.org jessie-backports-sloppy/non Translation-en
Fetched 222 kB in 9s (23.7 kB/s)
W: GPG error: http://deb.debian.org jessie-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
W: GPG error: http://deb.debian.org jessie-backports-sloppy InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 NO_PUBKEY 7638D0442B90D010
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports/nonfree/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports-sloppy/non/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
W: Failed to fetch http://deb.debian.org/debian/dists/jessie-backports-sloppy/free/binary-armhf/Packages 404 Not Found [IP: 2a04:4e42:1d::204 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.
Error executing command, exiting
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
rlwrap
The following NEW packages will be installed:
nodejs rlwrap
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/8129 kB of archives.
After this operation, 38.7 MB of additional disk space will be used.
Selecting previously unselected package rlwrap.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 47428 files and directories currently installed.)
Preparing to unpack .../rlwrap_0.41-1_armhf.deb ...
Unpacking rlwrap (0.41-1) ...
Selecting previously unselected package nodejs.
Preparing to unpack .../nodejs_5.12.0-1nodesource1~jessie1_armhf.deb ...
Detected old npm client, removing...
Unpacking nodejs (5.12.0-1nodesource1~jessie1) ...
Processing triggers for man-db (2.7.5-1~bpo8+1) ...
Setting up rlwrap (0.41-1) ...
update-alternatives: using /usr/bin/rlwrap to provide /usr/bin/readline-editor (readline-editor) in auto mode
Setting up nodejs (5.12.0-1nodesource1~jessie1) ...
Version actuelle : v5.12.0
> @serialport/bindings@2.0.2 install /var/www/html/plugins/rflink/resources/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild
prebuild-install WARN install No prebuilt binaries found (target=5.12.0 runtime=node arch=arm platform=linux)
make: Entering directory '/var/www/html/plugins/rflink/resources/node_modules/@serialport/bindings/build'
CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function 'void EIO_AfterOpen(uv_work_t*)':
../src/serialport.cpp:95:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(2, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterUpdate(uv_work_t*)':
../src/serialport.cpp:150:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(1, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterClose(uv_work_t*)':
../src/serialport.cpp:188:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(1, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterFlush(uv_work_t*)':
../src/serialport.cpp:231:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(1, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterSet(uv_work_t*)':
../src/serialport.cpp:285:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(1, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterGet(uv_work_t*)':
../src/serialport.cpp:336:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(2, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterGetBaudRate(uv_work_t*)':
../src/serialport.cpp:383:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(2, argv);
^
../src/serialport.cpp: In function 'void EIO_AfterDrain(uv_work_t*)':
../src/serialport.cpp:424:30: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
data->callback.Call(1, argv);
^
CXX(target) Release/obj.target/bindings/src/serialport_unix.o
CXX(target) Release/obj.target/bindings/src/poller.o
../src/poller.cpp: In static member function 'static void Poller::onData(uv_poll_t*, int, int)':
../src/poller.cpp:69:29: warning: 'v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const' is deprecated (declared at ../../../nan/nan.h:1647) [-Wdeprecated-declarations]
obj->callback.Call(2, argv);
^
CXX(target) Release/obj.target/bindings/src/serialport_linux.o
SOLINK_MODULE(target) Release/obj.target/bindings.node
COPY Release/bindings.node
make: Leaving directory '/var/www/html/plugins/rflink/resources/node_modules/@serialport/bindings/build'
JeedomRflink@0.0.1 /var/www/html/plugins/rflink/resources
+-- request@2.88.0
| +-- aws-sign2@0.7.0
| +-- aws4@1.8.0
| +-- caseless@0.12.0
| +-- combined-stream@1.0.6
| | `-- delayed-stream@1.0.0
| +-- extend@3.0.2
| +-- forever-agent@0.6.1
| +-- form-data@2.3.2
| | `-- asynckit@0.4.0
| +-- har-validator@5.1.0
| | +-- ajv@5.5.2
| | | +-- co@4.6.0
| | | +-- fast-deep-equal@1.1.0
| | | +-- fast-json-stable-stringify@2.0.0
| | | `-- json-schema-traverse@0.3.1
| | `-- har-schema@2.0.0
| +-- http-signature@1.2.0
| | +-- assert-plus@1.0.0
| | +-- jsprim@1.4.1
| | | +-- extsprintf@1.3.0
| | | +-- json-schema@0.2.3
| | | `-- verror@1.10.0
| | | `-- core-util-is@1.0.2
| | `-- sshpk@1.14.2
| | +-- asn1@0.2.4
| | +-- bcrypt-pbkdf@1.0.2
| | +-- dashdash@1.14.1
| | +-- ecc-jsbn@0.1.2
| | +-- getpass@0.1.7
| | +-- jsbn@0.1.1
| | +-- safer-buffer@2.1.2
| | `-- tweetnacl@0.14.5
| +-- is-typedarray@1.0.0
| +-- isstream@0.1.2
| +-- json-stringify-safe@5.0.1
| +-- mime-types@2.1.20
| | `-- mime-db@1.36.0
| +-- oauth-sign@0.9.0
| +-- performance-now@2.1.0
| +-- qs@6.5.2
| +-- safe-buffer@5.1.2
| +-- tough-cookie@2.4.3
| | +-- psl@1.1.29
| | `-- punycode@1.4.1
| +-- tunnel-agent@0.6.0
| `-- uuid@3.3.2
+-- serialport@7.0.2
| +-- @serialport/binding-mock@2.0.1
| | `-- @serialport/binding-abstract@2.0.1
| +-- @serialport/bindings@2.0.2
| | +-- bindings@1.3.0
| | +-- nan@2.11.0
| | `-- prebuild-install@5.1.0
| | +-- detect-libc@1.0.3
| | +-- expand-template@1.1.1
| | +-- github-from-package@0.0.0
| | +-- minimist@1.2.0
| | +-- mkdirp@0.5.1
| | | `-- minimist@0.0.8
| | +-- node-abi@2.4.3
| | | `-- semver@5.5.1
| | +-- noop-logger@0.1.1
| | +-- npmlog@4.1.2
| | | +-- are-we-there-yet@1.1.5
| | | | +-- delegates@1.0.0
| | | | `-- readable-stream@2.3.6
| | | | +-- inherits@2.0.3
| | | | +-- isarray@1.0.0
| | | | +-- process-nextick-args@2.0.0
| | | | +-- string_decoder@1.1.1
| | | | `-- util-deprecate@1.0.2
| | | +-- console-control-strings@1.1.0
| | | +-- gauge@2.7.4
| | | | +-- aproba@1.2.0
| | | | +-- has-unicode@2.0.1
| | | | +-- object-assign@4.1.1
| | | | +-- signal-exit@3.0.2
| | | | +-- string-width@1.0.2
| | | | | +-- code-point-at@1.1.0
| | | | | `-- is-fullwidth-code-point@1.0.0
| | | | | `-- number-is-nan@1.0.1
| | | | +-- strip-ansi@3.0.1
| | | | | `-- ansi-regex@2.1.1
| | | | `-- wide-align@1.1.3
| | | `-- set-blocking@2.0.0
| | +-- os-homedir@1.0.2
| | +-- pump@2.0.1
| | | +-- end-of-stream@1.4.1
| | | `-- once@1.4.0
| | | `-- wrappy@1.0.2
| | +-- rc@1.2.8
| | | +-- deep-extend@0.6.0
| | | +-- ini@1.3.5
| | | `-- strip-json-comments@2.0.1
| | +-- simple-get@2.8.1
| | | +-- decompress-response@3.3.0
| | | | `-- mimic-response@1.0.1
| | | `-- simple-concat@1.0.0
| | +-- tar-fs@1.16.3
| | | +-- chownr@1.0.1
| | | +-- pump@1.0.3
| | | `-- tar-stream@1.6.1
| | | +-- bl@1.2.2
| | | +-- buffer-alloc@1.2.0
| | | | +-- buffer-alloc-unsafe@1.1.0
| | | | `-- buffer-fill@1.0.0
| | | +-- fs-constants@1.0.0
| | | +-- to-buffer@1.1.1
| | | `-- xtend@4.0.1
| | `-- which-pm-runs@1.0.0
| +-- @serialport/parser-byte-length@2.0.1
| +-- @serialport/parser-cctalk@2.0.1
| +-- @serialport/parser-delimiter@2.0.1
| +-- @serialport/parser-readline@2.0.1
| +-- @serialport/parser-ready@2.0.1
| +-- @serialport/parser-regex@2.0.1
| +-- @serialport/stream@2.0.1
| +-- commander@2.17.1
| +-- debug@3.1.0
| | `-- ms@2.0.0
| +-- promirepl@1.0.1
| `-- prompt-list@3.2.0
| +-- ansi-cyan@0.1.1
| | `-- ansi-wrap@0.1.0
| +-- ansi-dim@0.1.1
| `-- prompt-radio@1.2.1
| +-- debug@2.6.9
| `-- prompt-checkbox@2.2.0
| +-- debug@2.6.9
| `-- prompt-base@4.1.0
| +-- component-emitter@1.2.1
| +-- koalas@1.0.2
| +-- log-utils@0.2.1
| | +-- ansi-colors@0.2.0
| | | +-- ansi-bgblack@0.1.1
| | | +-- ansi-bgblue@0.1.1
| | | +-- ansi-bgcyan@0.1.1
| | | +-- ansi-bggreen@0.1.1
| | | +-- ansi-bgmagenta@0.1.1
| | | +-- ansi-bgred@0.1.1
| | | +-- ansi-bgwhite@0.1.1
| | | +-- ansi-bgyellow@0.1.1
| | | +-- ansi-black@0.1.1
| | | +-- ansi-blue@0.1.1
| | | +-- ansi-bold@0.1.1
| | | +-- ansi-gray@0.1.1
| | | +-- ansi-green@0.1.1
| | | +-- ansi-grey@0.1.1
| | | +-- ansi-hidden@0.1.1
| | | +-- ansi-inverse@0.1.1
| | | +-- ansi-italic@0.1.1
| | | +-- ansi-magenta@0.1.1
| | | +-- ansi-red@0.1.1
| | | +-- ansi-reset@0.1.1
| | | +-- ansi-strikethrough@0.1.1
| | | +-- ansi-underline@0.1.1
| | | +-- ansi-white@0.1.1
| | | +-- ansi-yellow@0.1.1
| | | `-- lazy-cache@2.0.2
| | | `-- set-getter@0.1.0
| | | `-- to-object-path@0.3.0
| | +-- error-symbol@0.1.0
| | +-- info-symbol@0.1.0
| | +-- log-ok@0.1.1
| | +-- success-symbol@0.1.0
| | +-- time-stamp@1.1.0
| | `-- warning-symbol@0.1.0
| +-- prompt-actions@3.0.2
| | `-- debug@2.6.9
| +-- prompt-question@5.0.2
| | +-- clone-deep@1.0.0
| | | +-- for-own@1.0.0
| | | | `-- for-in@1.0.2
| | | +-- is-plain-object@2.0.4
| | | +-- kind-of@5.1.0
| | | `-- shallow-clone@1.0.0
| | | +-- kind-of@5.1.0
| | | `-- mixin-object@2.0.1
| | | `-- for-in@0.1.8
| | +-- define-property@1.0.0
| | | `-- is-descriptor@1.0.2
| | | +-- is-accessor-descriptor@1.0.0
| | | | `-- kind-of@6.0.2
| | | +-- is-data-descriptor@1.0.0
| | | | `-- kind-of@6.0.2
| | | `-- kind-of@6.0.2
| | +-- isobject@3.0.1
| | +-- kind-of@5.1.0
| | `-- prompt-choices@4.1.0
| | +-- arr-swap@1.0.1
| | | `-- is-number@3.0.0
| | +-- choices-separator@2.0.0
| | | `-- debug@2.6.9
| | +-- clone-deep@4.0.0
| | | `-- shallow-clone@3.0.0
| | +-- collection-visit@1.0.0
| | | +-- map-visit@1.0.0
| | | `-- object-visit@1.0.1
| | +-- define-property@2.0.2
| | +-- is-number@6.0.0
| | +-- kind-of@6.0.2
| | +-- pointer-symbol@1.0.0
| | +-- radio-symbol@2.0.0
| | +-- set-value@3.0.0
| | +-- terminal-paginator@2.0.2
| | | `-- debug@2.6.9
| | `-- toggle-array@1.0.1
| +-- readline-ui@2.2.3
| | +-- debug@2.6.9
| | `-- string-width@2.1.1
| | +-- is-fullwidth-code-point@2.0.0
| | `-- strip-ansi@4.0.0
| | `-- ansi-regex@3.0.0
| +-- readline-utils@2.2.3
| | +-- arr-flatten@1.1.0
| | +-- extend-shallow@2.0.1
| | | `-- is-extendable@0.1.1
| | +-- is-buffer@1.1.6
| | +-- is-number@3.0.0
| | | `-- kind-of@3.2.2
| | +-- is-windows@1.0.2
| | +-- mute-stream@0.0.7
| | +-- strip-color@0.1.0
| | `-- window-size@1.1.1
| | `-- is-number@3.0.0
| `-- static-extend@0.1.2
| +-- define-property@0.2.5
| | `-- is-descriptor@0.1.6
| | +-- is-accessor-descriptor@0.1.6
| | | `-- kind-of@3.2.2
| | +-- is-data-descriptor@0.1.4
| | | `-- kind-of@3.2.2
| | `-- kind-of@5.1.0
| `-- object-copy@0.1.0
| +-- copy-descriptor@0.1.1
| `-- define-property@0.2.5
| `-- is-descriptor@0.1.6
| +-- is-accessor-descriptor@0.1.6
| +-- is-data-descriptor@0.1.4
| `-- kind-of@5.1.0
`-- telnet-client@0.15.8
`-- bluebird@3.5.2
Fin de l'installation
Code : Tout sélectionner
module.js:341
throw err;
^
Error: Cannot find module 'request'
at Function.Module._resolveFilename (module.js:339:15)
at Function.Module._load (module.js:290:25)
at Module.require (module.js:367:17)
at require (internal/module.js:20:19)
at Object.<anonymous> (/var/www/html/plugins/espeasy/resources/espeasy.js:3:15)
at Module._compile (module.js:413:34)
at Object.Module._extensions..js (module.js:422:10)
at Module.load (module.js:357:32)
at Function.Module._load (module.js:314:12)
at Function.Module.runMain (module.js:447:10)
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Moi j’ai le même problème. La date d’installation ne change pas et daemon d’easyesp hs. Mais ça marche je relance le demon en manuel
Envoyé de mon iPhone en utilisant Tapatalk
Envoyé de mon iPhone en utilisant Tapatalk
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
dans les logs mon rflink n'est pas a l'heure. Il y a 2 heures de décallage. C'est normal ou il y a un truc a faire ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
Regarde l'heure de ta machine hôte et son fuseau horaire.
Z83II + zstick Aeotec sw090 (51 nœuds Z-Wave), Clé 3G Huawei E172, rfplayer (portail, Pergola Somfy), Station météo Netatmo, Xiaomi (Gateway 31 nœuds, Aspi v1, lampe de chevet v1 et v2, rideau), nut, Google Home, Alexa, Squeezebox, Tondeuse Worx
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
ma smart est a l'heure pourtant. je ne comprends pas et le fuseau est bien sur Paris. la machine hote c'est bien la smart ?
Re: [Plugin Tiers][Sujet Principal] Rflink : passerelle RF433 multi-protocoles
si ton rflink est sur la smart oui.
Z83II + zstick Aeotec sw090 (51 nœuds Z-Wave), Clé 3G Huawei E172, rfplayer (portail, Pergola Somfy), Station météo Netatmo, Xiaomi (Gateway 31 nœuds, Aspi v1, lampe de chevet v1 et v2, rideau), nut, Google Home, Alexa, Squeezebox, Tondeuse Worx
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 8 invités