Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

[Plugin Tiers] Zigate

Pour échanger sur les plugins classés en catégorie "Protocoles domotiques"
nitronix
Timide
Messages : 79
Inscription : 22 oct. 2018, 12:15

Re: [Plugin Tiers] Zigate

Message par nitronix » 28 juil. 2019, 14:20

Bonjour,

au sujet du maillage et de la possibilité d'extension du réseau en passant par des périphériques tel que des prises Osram smart + que j'ai exprès acheté afin d’étendre le réseau, je n'ai pas observé d'amelioration du LQI... comment cela se fait il ? Je trouve que cela manque de visibilité, n'est il pas possible, comme sur Z-wave d'avoir un aperçu du maillage et par quel maillon communique par exemple un périphérique trop loin de la tete de réseau ?

Et une autre question, quand je redémarre Jeedom, deux ou trois de ces périphériques (Aqara : capteur fuite d'eau ou détecteurs d'ouverture de porte) trop éloignés se désactives tout seul, dans le plugin Zigate, je dois cliquer à nouveau dans la fonction "activer" de chaque peripheriques pour qu'ils puissent communiquer à nouveau et être géré par le plugin... il n y a pas moyen de couper cette fonction de rejet dans le plugin ?

Merci à vous ;)

reimsois
Timide
Messages : 34
Inscription : 23 avr. 2017, 14:49

Re: [Plugin Tiers] Zigate

Message par reimsois » 28 juil. 2019, 16:54

sebfar a écrit :
28 juil. 2019, 13:22
reimsois a écrit :Bonjour Sebfar,

oui c'est ca et Je n'ai pas l'impression que le maillage entre un noeud terminal et un routeur fonctionne.
Est-ce normal et y-a-t-il un paramètrage specifique à mettre en oeuvre pour activer ce fonctionnement ?

Christophe
Ce que je voulais dire, c'est que tu ne peux rien faire.. Le maillage se fait tout seul

Envoyé de mon MI 9 en utilisant Tapatalk
OK, merci pour l'info !

Romainbaptiste86
Timide
Messages : 8
Inscription : 27 mars 2018, 00:36

Re: [Plugin Tiers] Zigate

Message par Romainbaptiste86 » 29 juil. 2019, 04:35

Bonjour mydomatlantike, j’ai juste suivi ce post ci viewtopic.php?t=44870 pour la mise à jour de la Strech, pense bien faire une sauvegarde avant et de la récupérer sur une clé à part.
mydomatlantike a écrit :
27 juil. 2019, 22:15
Bonjour,

Depuis la derniere mise a jour ZIGATE ,l'installation des dépendances reste NOK ,plusieurs relance restent sans effet voici les logs ,les MAJ des autres plugin est sans probleme.
Peut etre avez vous la solution a travers me logs:

Installation des dépendances
Hit http://repo.jeedom.com stable InRelease
Hit http://security.debian.org jessie/updates InRelease
Hit http://repo.jeedom.com stable/main arm64 Packages
Ign http://repo.jeedom.com stable/main Translation-en
Get:1 http://security.debian.org jessie/updates/main Sources [327 kB]
Get:2 http://security.debian.org jessie/updates/non-free Sources [1629 B]
Hit http://security.debian.org jessie/updates/contrib Sources
Hit http://oph.mdrjr.net all InRelease
Hit http://oph.mdrjr.net jessie InRelease
Get:3 http://oph.mdrjr.net all/c2 arm64 Packages
Get:4 http://oph.mdrjr.net all/main arm64 Packages
Get:5 http://oph.mdrjr.net all/testing arm64 Packages
Get:6 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:7 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:8 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:9 http://oph.mdrjr.net jessie/backports arm64 Packages
Get:10 http://oph.mdrjr.net jessie/main arm64 Packages
Get:11 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:12 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Hit http://oph.mdrjr.net all/c2 arm64 Packages
Hit http://oph.mdrjr.net all/main arm64 Packages
Hit http://oph.mdrjr.net all/testing arm64 Packages
Get:13 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:14 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:15 http://oph.mdrjr.net all/testing Translation-en [326 B]
Hit http://oph.mdrjr.net jessie/backports arm64 Packages
Hit http://oph.mdrjr.net jessie/main arm64 Packages
Get:16 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:17 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:18 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:19 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:20 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:21 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:22 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:23 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:24 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:25 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:26 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:27 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:28 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Ign http://oph.mdrjr.net all/c2 Translation-en
Get:29 http://oph.mdrjr.net all/main Translation-en [323 B]
Ign http://oph.mdrjr.net all/main Translation-en
Get:30 http://oph.mdrjr.net all/testing Translation-en [326 B]
Ign http://oph.mdrjr.net all/testing Translation-en
Get:31 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Ign http://oph.mdrjr.net jessie/backports Translation-en
Get:32 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Ign http://oph.mdrjr.net jessie/main Translation-en
Ign http://ftp.debian.org jessie InRelease
Hit http://ftp.debian.org jessie-updates InRelease
Ign http://ftp.debian.org jessie-backports InRelease
Ign http://ftp.debian.org jessie-proposed-updates InRelease
Hit http://ftp.debian.org jessie Release.gpg
Ign http://ftp.debian.org jessie-backports Release.gpg
Hit http://ftp.debian.org jessie-updates/main Sources
Hit http://ftp.debian.org jessie-updates/contrib Sources
Hit http://ftp.debian.org jessie-updates/non-free Sources
Ign http://ftp.debian.org jessie-proposed-updates Release.gpg
Hit http://ftp.debian.org jessie Release
Ign http://ftp.debian.org jessie-backports Release
Ign http://ftp.debian.org jessie-proposed-updates Release
Ign http://ftp.debian.org jessie-backports/main Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/contrib Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/non-free Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/main arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-backports/contrib arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-backports/non-free arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/contrib Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/non-free Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/main Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/contrib arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/non-free arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/main arm64 Packages/DiffIndex
Hit http://ftp.debian.org jessie/main Sources
Hit http://ftp.debian.org jessie/contrib Sources
Hit http://ftp.debian.org jessie/non-free Sources
Ign http://ftp.debian.org jessie-backports/contrib Translation-en
Ign http://ftp.debian.org jessie-backports/main Translation-en
Ign http://ftp.debian.org jessie-backports/non-free Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/contrib Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/main Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/non-free Translation-en
Err http://ftp.debian.org jessie-backports/main Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/contrib Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/non-free Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/main arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/contrib arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/non-free arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/contrib Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/non-free Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/main Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/contrib arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/non-free arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/main arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
W: There is no public key available for the following key IDs:
AA8E81B4331F7F50
W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... /InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://security.debian.org/dists/jessie ... /InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://ftp.debian.org/debian/dists/jessie/Release Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

E: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists...

Building dependency tree...
Reading state information...
python3 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 203 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python3-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 203 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
python3-urllib3
Suggested packages:
python3-ndg-httpsclient python3-openssl python3-pyasn1 python3-socks
The following packages will be upgraded:
python3-requests python3-urllib3
2 upgraded, 0 newly installed, 0 to remove and 201 not upgraded.
Need to get 146 kB of archives.
After this operation, 131 kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
python3-urllib3 python3-requests
E: There are problems and -y was used without --force-yes
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
python3-pkg-resources
Suggested packages:
python-setuptools-doc
The following packages will be upgraded:
python3-pkg-resources python3-setuptools
2 upgraded, 0 newly installed, 0 to remove and 201 not upgraded.
Need to get 353 kB of archives.
After this operation, 695 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
python3-setuptools python3-pkg-resources
E: There are problems and -y was used without --force-yes
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libpython3-dev libpython3.4 libpython3.4-dev python3.4-dev
The following NEW packages will be installed:
libpython3-dev libpython3.4 libpython3.4-dev python3-dev python3.4-dev
0 upgraded, 5 newly installed, 0 to remove and 203 not upgraded.
Need to get 3489 kB of archives.
After this operation, 18.3 MB of additional disk space will be used.
Err http://ftp.debian.org/debian/ jessie/main libpython3.4 arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main libpython3.4-dev arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main libpython3-dev arm64 3.4.2-2
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main python3.4-dev arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main python3-dev arm64 3.4.2-2
404 Not Found [IP: 130.89.148.12 80]
E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Collecting zigate==0.31.0
Using cached https://files.pythonhosted.org/packages ... ne-any.whl
Collecting RPi.GPIO (from zigate==0.31.0)
Using cached https://files.pythonhosted.org/packages ... 7.0.tar.gz
Requirement already satisfied: pyserial in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (3.4)
Requirement already satisfied: pydispatcher in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (2.0.5)
Requirement already satisfied: bottle in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (0.12.16)
Installing collected packages: RPi.GPIO, zigate
Running setup.py install for RPi.GPIO: started
Running setup.py install for RPi.GPIO: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-5m308ypd/RPi.GPIO/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nqs806kw/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build/lib.linux-aarch64-3.4
creating build/lib.linux-aarch64-3.4/RPi
copying RPi/__init__.py -> build/lib.linux-aarch64-3.4/RPi
creating build/lib.linux-aarch64-3.4/RPi/GPIO
copying RPi/GPIO/__init__.py -> build/lib.linux-aarch64-3.4/RPi/GPIO
running build_ext
building 'RPi._GPIO' extension
creating build/temp.linux-aarch64-3.4
creating build/temp.linux-aarch64-3.4/source
aarch64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c source/py_gpio.c -o build/temp.linux-aarch64-3.4/source/py_gpio.o
source/py_gpio.c:23:20: fatal error: Python.h: No such file or directory
#include "Python.h"
^
compilation terminated.
error: command 'aarch64-linux-gnu-gcc' failed with exit status 1

----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-5m308ypd/RPi.GPIO/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nqs806kw/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-5m308ypd/RPi.GPIO/
Installation des dépendances terminé !

doudz
Timide
Messages : 236
Inscription : 04 janv. 2016, 13:41

Re: [Plugin Tiers] Zigate

Message par doudz » 29 juil. 2019, 20:53

sebfar a écrit :
28 juil. 2019, 13:22
reimsois a écrit :Bonjour Sebfar,

oui c'est ca et Je n'ai pas l'impression que le maillage entre un noeud terminal et un routeur fonctionne.
Est-ce normal et y-a-t-il un paramètrage specifique à mettre en oeuvre pour activer ce fonctionnement ?

Christophe
Ce que je voulais dire, c'est que tu ne peux rien faire.. Le maillage se fait tout seul

Envoyé de mon MI 9 en utilisant Tapatalk
il n'y a rien à faire pour le maillage, c'est la couche réseau zigbee qui va gérer automatiquement le "meilleur" chemin, on ne peut pas forcer les choses.

doudz
Timide
Messages : 236
Inscription : 04 janv. 2016, 13:41

Re: [Plugin Tiers] Zigate

Message par doudz » 29 juil. 2019, 21:35

Je confirme que c'est la solution.
Il faut mettre à jour l'OS.
Romainbaptiste86 a écrit :
29 juil. 2019, 04:35
Bonjour mydomatlantike, j’ai juste suivi ce post ci viewtopic.php?t=44870 pour la mise à jour de la Strech, pense bien faire une sauvegarde avant et de la récupérer sur une clé à part.
mydomatlantike a écrit :
27 juil. 2019, 22:15
Bonjour,

Depuis la derniere mise a jour ZIGATE ,l'installation des dépendances reste NOK ,plusieurs relance restent sans effet voici les logs ,les MAJ des autres plugin est sans probleme.
Peut etre avez vous la solution a travers me logs:

Installation des dépendances
Hit http://repo.jeedom.com stable InRelease
Hit http://security.debian.org jessie/updates InRelease
Hit http://repo.jeedom.com stable/main arm64 Packages
Ign http://repo.jeedom.com stable/main Translation-en
Get:1 http://security.debian.org jessie/updates/main Sources [327 kB]
Get:2 http://security.debian.org jessie/updates/non-free Sources [1629 B]
Hit http://security.debian.org jessie/updates/contrib Sources
Hit http://oph.mdrjr.net all InRelease
Hit http://oph.mdrjr.net jessie InRelease
Get:3 http://oph.mdrjr.net all/c2 arm64 Packages
Get:4 http://oph.mdrjr.net all/main arm64 Packages
Get:5 http://oph.mdrjr.net all/testing arm64 Packages
Get:6 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:7 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:8 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:9 http://oph.mdrjr.net jessie/backports arm64 Packages
Get:10 http://oph.mdrjr.net jessie/main arm64 Packages
Get:11 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:12 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Hit http://oph.mdrjr.net all/c2 arm64 Packages
Hit http://oph.mdrjr.net all/main arm64 Packages
Hit http://oph.mdrjr.net all/testing arm64 Packages
Get:13 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:14 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:15 http://oph.mdrjr.net all/testing Translation-en [326 B]
Hit http://oph.mdrjr.net jessie/backports arm64 Packages
Hit http://oph.mdrjr.net jessie/main arm64 Packages
Get:16 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:17 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:18 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:19 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:20 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:21 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:22 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:23 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Get:24 http://oph.mdrjr.net all/main Translation-en [323 B]
Get:25 http://oph.mdrjr.net all/testing Translation-en [326 B]
Get:26 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Get:27 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Get:28 http://oph.mdrjr.net all/c2 Translation-en [321 B]
Ign http://oph.mdrjr.net all/c2 Translation-en
Get:29 http://oph.mdrjr.net all/main Translation-en [323 B]
Ign http://oph.mdrjr.net all/main Translation-en
Get:30 http://oph.mdrjr.net all/testing Translation-en [326 B]
Ign http://oph.mdrjr.net all/testing Translation-en
Get:31 http://oph.mdrjr.net jessie/backports Translation-en [331 B]
Ign http://oph.mdrjr.net jessie/backports Translation-en
Get:32 http://oph.mdrjr.net jessie/main Translation-en [326 B]
Ign http://oph.mdrjr.net jessie/main Translation-en
Ign http://ftp.debian.org jessie InRelease
Hit http://ftp.debian.org jessie-updates InRelease
Ign http://ftp.debian.org jessie-backports InRelease
Ign http://ftp.debian.org jessie-proposed-updates InRelease
Hit http://ftp.debian.org jessie Release.gpg
Ign http://ftp.debian.org jessie-backports Release.gpg
Hit http://ftp.debian.org jessie-updates/main Sources
Hit http://ftp.debian.org jessie-updates/contrib Sources
Hit http://ftp.debian.org jessie-updates/non-free Sources
Ign http://ftp.debian.org jessie-proposed-updates Release.gpg
Hit http://ftp.debian.org jessie Release
Ign http://ftp.debian.org jessie-backports Release
Ign http://ftp.debian.org jessie-proposed-updates Release
Ign http://ftp.debian.org jessie-backports/main Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/contrib Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/non-free Sources/DiffIndex
Ign http://ftp.debian.org jessie-backports/main arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-backports/contrib arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-backports/non-free arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/contrib Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/non-free Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/main Sources/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/contrib arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/non-free arm64 Packages/DiffIndex
Ign http://ftp.debian.org jessie-proposed-updates/main arm64 Packages/DiffIndex
Hit http://ftp.debian.org jessie/main Sources
Hit http://ftp.debian.org jessie/contrib Sources
Hit http://ftp.debian.org jessie/non-free Sources
Ign http://ftp.debian.org jessie-backports/contrib Translation-en
Ign http://ftp.debian.org jessie-backports/main Translation-en
Ign http://ftp.debian.org jessie-backports/non-free Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/contrib Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/main Translation-en
Ign http://ftp.debian.org jessie-proposed-updates/non-free Translation-en
Err http://ftp.debian.org jessie-backports/main Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/contrib Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/non-free Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/main arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/contrib arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-backports/non-free arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/contrib Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/non-free Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/main Sources
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/contrib arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/non-free arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org jessie-proposed-updates/main arm64 Packages
404 Not Found [IP: 130.89.148.12 80]
W: There is no public key available for the following key IDs:
AA8E81B4331F7F50
W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... /InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://security.debian.org/dists/jessie ... /InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://ftp.debian.org/debian/dists/jessie/Release Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file)

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... ce/Sources 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

W: Failed to fetch http://ftp.debian.org/debian/dists/jess ... 4/Packages 404 Not Found [IP: 130.89.148.12 80]

E: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists...

Building dependency tree...
Reading state information...
python3 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 203 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python3-pip is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 203 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
python3-urllib3
Suggested packages:
python3-ndg-httpsclient python3-openssl python3-pyasn1 python3-socks
The following packages will be upgraded:
python3-requests python3-urllib3
2 upgraded, 0 newly installed, 0 to remove and 201 not upgraded.
Need to get 146 kB of archives.
After this operation, 131 kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
python3-urllib3 python3-requests
E: There are problems and -y was used without --force-yes
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
python3-pkg-resources
Suggested packages:
python-setuptools-doc
The following packages will be upgraded:
python3-pkg-resources python3-setuptools
2 upgraded, 0 newly installed, 0 to remove and 201 not upgraded.
Need to get 353 kB of archives.
After this operation, 695 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
python3-setuptools python3-pkg-resources
E: There are problems and -y was used without --force-yes
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libpython3-dev libpython3.4 libpython3.4-dev python3.4-dev
The following NEW packages will be installed:
libpython3-dev libpython3.4 libpython3.4-dev python3-dev python3.4-dev
0 upgraded, 5 newly installed, 0 to remove and 203 not upgraded.
Need to get 3489 kB of archives.
After this operation, 18.3 MB of additional disk space will be used.
Err http://ftp.debian.org/debian/ jessie/main libpython3.4 arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main libpython3.4-dev arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main libpython3-dev arm64 3.4.2-2
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main python3.4-dev arm64 3.4.2-1
404 Not Found [IP: 130.89.148.12 80]
Err http://ftp.debian.org/debian/ jessie/main python3-dev arm64 3.4.2-2
404 Not Found [IP: 130.89.148.12 80]
E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Failed to fetch http://ftp.debian.org/debian/pool/main/ ... _arm64.deb 404 Not Found [IP: 130.89.148.12 80]

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Collecting zigate==0.31.0
Using cached https://files.pythonhosted.org/packages ... ne-any.whl
Collecting RPi.GPIO (from zigate==0.31.0)
Using cached https://files.pythonhosted.org/packages ... 7.0.tar.gz
Requirement already satisfied: pyserial in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (3.4)
Requirement already satisfied: pydispatcher in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (2.0.5)
Requirement already satisfied: bottle in /usr/local/lib/python3.4/dist-packages (from zigate==0.31.0) (0.12.16)
Installing collected packages: RPi.GPIO, zigate
Running setup.py install for RPi.GPIO: started
Running setup.py install for RPi.GPIO: finished with status 'error'
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-5m308ypd/RPi.GPIO/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nqs806kw/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build/lib.linux-aarch64-3.4
creating build/lib.linux-aarch64-3.4/RPi
copying RPi/__init__.py -> build/lib.linux-aarch64-3.4/RPi
creating build/lib.linux-aarch64-3.4/RPi/GPIO
copying RPi/GPIO/__init__.py -> build/lib.linux-aarch64-3.4/RPi/GPIO
running build_ext
building 'RPi._GPIO' extension
creating build/temp.linux-aarch64-3.4
creating build/temp.linux-aarch64-3.4/source
aarch64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c source/py_gpio.c -o build/temp.linux-aarch64-3.4/source/py_gpio.o
source/py_gpio.c:23:20: fatal error: Python.h: No such file or directory
#include "Python.h"
^
compilation terminated.
error: command 'aarch64-linux-gnu-gcc' failed with exit status 1

----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-5m308ypd/RPi.GPIO/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-nqs806kw/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-5m308ypd/RPi.GPIO/
Installation des dépendances terminé !

reimsois
Timide
Messages : 34
Inscription : 23 avr. 2017, 14:49

Re: [Plugin Tiers] Zigate

Message par reimsois » 29 juil. 2019, 22:43

doudz a écrit :
29 juil. 2019, 20:53
sebfar a écrit :
28 juil. 2019, 13:22
reimsois a écrit :Bonjour Sebfar,

oui c'est ca et Je n'ai pas l'impression que le maillage entre un noeud terminal et un routeur fonctionne.
Est-ce normal et y-a-t-il un paramètrage specifique à mettre en oeuvre pour activer ce fonctionnement ?

Christophe
Ce que je voulais dire, c'est que tu ne peux rien faire.. Le maillage se fait tout seul

Envoyé de mon MI 9 en utilisant Tapatalk
il n'y a rien à faire pour le maillage, c'est la couche réseau zigbee qui va gérer automatiquement le "meilleur" chemin, on ne peut pas forcer les choses.
Merci Doudz

jerome6994
Timide
Messages : 360
Inscription : 04 juin 2019, 12:36
Localisation : Lyon

Re: [Plugin Tiers] Zigate

Message par jerome6994 » 29 juil. 2019, 23:16

Bonjour

Suite à l'intégration de mes volets profalux dans la zigate, je rencontre quelques soucis dans mes scénarios.
Mais avant d'incriminer mes scénarios, je les regarde à chaque erreur d'attendu du scénario et le résultat est que je ne trouve pas l'erreur.

Ce que je sais sur mes volets c'est que le réseau peut être en difficulté suite à la construction de la maison (Mâchefer) et j'ai un volet capricieux depuis le début.

pour cela j'ai des répéteurs dans la maison mais je ne sais pas dire si ceuc là sont bien actif ou pas dans mon réseau car il passe régulièrement en inactif par le plugin !

Comment savoir quel élément est bien présent dans mon réseau et s'il fonctionne bien ou pas ?
Un genre de Map qualitative

Merci par avance
RPI 3 B+ : Jeedom 3.3.32 - Z-Wave + : Z-Stick GEN5 - Aeon Labs - RFXCom - ZiGate USB-TTL ZigBee®
IOT : Station Météo, Thermostat, Vannes Netatmo, Volets Profalux, Prises DI-O, Somfy Home Alarm, Hue, Fibaro

doudz
Timide
Messages : 236
Inscription : 04 janv. 2016, 13:41

Re: [Plugin Tiers] Zigate

Message par doudz » 30 juil. 2019, 11:30

jerome6994 a écrit :
29 juil. 2019, 23:16
Bonjour

Suite à l'intégration de mes volets profalux dans la zigate, je rencontre quelques soucis dans mes scénarios.
Mais avant d'incriminer mes scénarios, je les regarde à chaque erreur d'attendu du scénario et le résultat est que je ne trouve pas l'erreur.

Ce que je sais sur mes volets c'est que le réseau peut être en difficulté suite à la construction de la maison (Mâchefer) et j'ai un volet capricieux depuis le début.

pour cela j'ai des répéteurs dans la maison mais je ne sais pas dire si ceuc là sont bien actif ou pas dans mon réseau car il passe régulièrement en inactif par le plugin !

Comment savoir quel élément est bien présent dans mon réseau et s'il fonctionne bien ou pas ?
Un genre de Map qualitative

Merci par avance
Il est prévu d'ajouter une carte prochainement...
s'ils passent en inactif c'est que le plugin considère que l'équipement n'est plus connecté à la zigate (souvent car il n'y a pas de remontée récente d'information)

jerome6994
Timide
Messages : 360
Inscription : 04 juin 2019, 12:36
Localisation : Lyon

Re: [Plugin Tiers] Zigate

Message par jerome6994 » 30 juil. 2019, 13:37

Dans mon cas je peux comprendre que les télécommandes soient déclarées inactives sauf pour la télécommande ZOE qui sert un peut de centrale de programmation si on le souhaite.

Mais c'est surtout pour les répéteurs je ne sais pas si du coup il fonctionne ou pas

Mais je comprends aussi le retour d'info non présent, mais du coup est-ce que l'on peut imager une commande pour les réveiller à intervalle régulier ? comme le bouger de la souris pour réveiller nos PC :)
RPI 3 B+ : Jeedom 3.3.32 - Z-Wave + : Z-Stick GEN5 - Aeon Labs - RFXCom - ZiGate USB-TTL ZigBee®
IOT : Station Météo, Thermostat, Vannes Netatmo, Volets Profalux, Prises DI-O, Somfy Home Alarm, Hue, Fibaro

patrick49
Timide
Messages : 6
Inscription : 01 sept. 2016, 19:45
Localisation : 49

Re: [Plugin Tiers] Zigate

Message par patrick49 » 30 juil. 2019, 15:14

Bonjour
Personne pour m'aider ?
Impossible de relancer le Demon.
Je suppose que le message du log "No module named 'requests.packages.urllib3" correspond a l'anomalie mais je ne sais pas comment le résoudre et je n'ai rien trouvé dans le Forum qui correspond.
Merci de votre support
Patrick
Jeedom Smart 3.3.28, Zigate USB 3.0.f, Z-Wave, RFLink,...
patrick49 a écrit :
26 juil. 2019, 15:36
Bonjour depuis la maj du pluging , le demon est NOK
log : " [2019-07-26 15:20:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consecutivement
[2019-07-26 15:20:05][INFO] : Lancement démon zigate : /usr/bin/python3 /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py --device /dev/ttyUSB0 --gpio 0 --loglevel debug --apikey qpZBcaAHCnKMqFqKO4cAxSkVHnJ2aLLg --pid /tmp/jeedom/zigate/daemon.pid --socket /tmp/jeedom/zigate/daemon.sock --callback http://127.0.0.1:80/plugins/zigate/core ... ZiGate.php --sharedata 1
Traceback (most recent call last):
File "/var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py", line 17, in <module>
import requests
File "/usr/lib/python3/dist-packages/requests/__init__.py", line 60, in <module>
from .packages.urllib3.exceptions import DependencyWarning
ImportError: No module named 'requests.packages.urllib3' "

Si quelqu'un peut m'aider...Merci beaucoup

Jeedom Smart 3.3.28, Zigate USB 3.0.f, Z-Wave, RFLink,...

doudz
Timide
Messages : 236
Inscription : 04 janv. 2016, 13:41

Re: [Plugin Tiers] Zigate

Message par doudz » 31 juil. 2019, 08:39

Bonjour à tous,
J'ai apporté une modification qui sera dispo dès demain en béta sur le market qui devrait enfin résoudre les pertes d'équipements lorsqu'on relance le démon.
Si des volontaires veulent bien tester ? (à partir de demain)

Au passage ça devrait également résoudre le problème d'installation des dépendances sur Jeedom Smart.
Merci à tous !

delawich
Timide
Messages : 257
Inscription : 11 nov. 2015, 11:31

Re: [Plugin Tiers] Zigate

Message par delawich » 31 juil. 2019, 08:56

Merci à toi, je devrai testé, bonne journée

dragonslore
Timide
Messages : 49
Inscription : 20 mai 2017, 14:15

Re: [Plugin Tiers] Zigate

Message par dragonslore » 31 juil. 2019, 18:50

Bonjour à tous,

J'ai un NAS Synology 1812+ et un jeedom sous Docker, j'ai déjà en place une clé USB Zwave+ qui fonctionne très bien.
Je viens de recevoir ma Zigate USB, je l'ai mise à jour en firmware, elle est branché en direct (led rouge et bleu allumées), elle est bien detectée par l'OS de mon Synology sous l'intitulé "CP2102/CP2109 UART Bridge Controller [CP210x family] - Cygnal Integrated Products, Inc." par contre je ne la retrouve pas dans Jeedom dockerisé, le port n'apparait pas dans la configuration du plugin dans "Port clé ZiGate"

Avez vous une idée ?
Merci pour votre aide.
Manu
Manu
Jeedom 4.0.27/Debian 9 Docker sur Synology 1812+
Snips 0.64.0/Raspbian 9
Zwave+ et Zigbee

OUARZA
Timide
Messages : 298
Inscription : 13 févr. 2019, 08:10

Re: [Plugin Tiers] Zigate

Message par OUARZA » 31 juil. 2019, 22:13

OUARZA a écrit :
22 juil. 2019, 22:44
Bonjour,
Est-il possible d'éteindre la led bleue de la clé ?
Merci
Hello,
ça semble être possible :
https://zigate.fr/documentation/commandes-zigate/

Code : Tout sélectionner

Zigate -> Obj
0x0018
SetLed (v3.0f)	
<on/off : uint8_t >

0 – Off
1- On
Comment le mettre en place ?
Merci

Avatar de l’utilisateur
GEO
Timide
Messages : 158
Inscription : 05 juin 2015, 17:06
Localisation : Sud est lyonnais
Contact :

Re: [Plugin Tiers] Zigate

Message par GEO » 01 août 2019, 14:15

Bonjour dsl de la question basic, mais peut on implanter une carte pizigate sur une smart qui possède deja une carte Zwave sur le gpio.
Jeedom Smart, rfx433, OpenZwave
Smart Energy Switch Gen5 1 AEOTEC, Mini Keypad ZIPATO, SF812 Smoke EVERSPRING, Door/Window Sensor AEOTEC, ZM1602 VISION SECURITY, Multi Sensor Gen5 1 AEOTEC, FGK101 FIBARO, FGRGBWM441 RGBW FIBARO

patrick49
Timide
Messages : 6
Inscription : 01 sept. 2016, 19:45
Localisation : 49

Re: [Plugin Tiers] Zigate

Message par patrick49 » 01 août 2019, 15:53

Bonjour, après mise à jour du plugin , Il m'est toujours impossible de relancer le Demon.. avec le mème message :


[2019-08-01 15:38:13][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consecutivement
[2019-08-01 15:38:14][INFO] : Lancement démon zigate : /usr/bin/python3 /var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py --device /dev/ttyUSB0 --gpio 0 --loglevel info --apikey qpZBcaAHCnKMqFqKO4cAxSkVHnJ2aLLg --pid /tmp/jeedom/zigate/daemon.pid --socket /tmp/jeedom/zigate/daemon.sock --callback http://127.0.0.1:80/plugins/zigate/core ... ZiGate.php --sharedata 1
Traceback (most recent call last):
File "/var/www/html/plugins/zigate/core/class/../../resources/zigated/zigated.py", line 17, in <module>
import requests
File "/usr/lib/python3/dist-packages/requests/__init__.py", line 60, in <module>
from .packages.urllib3.exceptions import DependencyWarning
ImportError: No module named 'requests.packages.urllib3'
[2019-08-01 15:38:21][ERROR] : Impossible de lancer le démon zigate, relancer le démon en debug et vérifiez la log

Merci de votre aide
Patrick
Jeedom Smart 3.3.29, RFLink, Zwave, Zigate 1.3.2,....

jerome01
Timide
Messages : 6
Inscription : 22 juil. 2019, 16:10

Re: [Plugin Tiers] Zigate

Message par jerome01 » 01 août 2019, 20:01

bonjour à tous,
j'essaye d'intégrer la smart siren Heiman HS2WD-E dans Jeedom.
J'ai la dernière version du plugin Zigate (1.3.1) et la dernière version pour ma clé Zigate (3.1a). Pour Jeedom, j'ai la version 3.3.29.
La sirène est bien reconnue mais je n'ai que la possibilité de faire "refresh".
Est ce que qqun saurait comment activer la sirène et la lumière s'il vous plait?
Merci,
Jerome

dragonslore
Timide
Messages : 49
Inscription : 20 mai 2017, 14:15

Re: [Plugin Tiers] Zigate

Message par dragonslore » 02 août 2019, 19:45

dragonslore a écrit :
31 juil. 2019, 18:50
Bonjour à tous,

J'ai un NAS Synology 1812+ et un jeedom sous Docker, j'ai déjà en place une clé USB Zwave+ qui fonctionne très bien.
Je viens de recevoir ma Zigate USB, je l'ai mise à jour en firmware, elle est branché en direct (led rouge et bleu allumées), elle est bien detectée par l'OS de mon Synology sous l'intitulé "CP2102/CP2109 UART Bridge Controller [CP210x family] - Cygnal Integrated Products, Inc." par contre je ne la retrouve pas dans Jeedom dockerisé, le port n'apparait pas dans la configuration du plugin dans "Port clé ZiGate"

Avez vous une idée ?
Merci pour votre aide.
Manu
Bonjour à tous,

Pensez-vous qu'il est possible de voir la Zigate dans un conteneur Docker ?

Merci pour votre aide je désespère un peu :D et je ne trouve aucune information sur google pour résoudre.

Bon WE :)
Manu
Jeedom 4.0.27/Debian 9 Docker sur Synology 1812+
Snips 0.64.0/Raspbian 9
Zwave+ et Zigbee

doudz
Timide
Messages : 236
Inscription : 04 janv. 2016, 13:41

Re: [Plugin Tiers] Zigate

Message par doudz » 02 août 2019, 23:01

J'attire l'attention sur le fait que le plugin ne gère pas complètement le dernier firmware 3.1a... il me reste qq changement à intégrer, c'est pour bientôt

delawich
Timide
Messages : 257
Inscription : 11 nov. 2015, 11:31

Re: [Plugin Tiers] Zigate

Message par delawich » 03 août 2019, 08:20

Merci pour le développement

Répondre

Revenir vers « [Catégorie] Protocoles domotiques »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 7 invités