Comme annoncé, ce forum est passé en lecture seule au 1er janvier 2020. Désormais nous vous invitons à vous rendre sur notre nouvelle page communauté :
Image

A très bientôt !

shelly error fail to connect

Répondre
rigauli
Timide
Messages : 59
Inscription : 16 juin 2018, 19:42

shelly error fail to connect

Message par rigauli » 05 août 2019, 23:55

bonjour à tous,

je viens de tester le shelly 1 pour une porte de garage, sans soucis avec l'application ios mais j'ai un soucis sous jeedom.

Après intégration( sans soucis), erreur:
"Echec de la requête HTTP : http://192.168.86.35/relay/0?turn=off cURL error : Failed to connect to 192.168.86.35 port 80: No route to host"

est -ce que qq'un a ce problème ?

Qu'ai je raté ?

merci
JEEDOM Smart
Dongle Z-Wave
RFXCOM (RFX1000); rts, x2d, oregon,

Bosquetia
Actif
Messages : 6783
Inscription : 10 mai 2016, 07:54

Re: shelly error fail to connect

Message par Bosquetia » 06 août 2019, 07:47

Hello

Tout est OK dans la page santé de Jeedom ?

Avatar de l’utilisateur
lunarok
Actif
Messages : 6704
Inscription : 08 août 2014, 12:48
Localisation : Anjou

Re: shelly error fail to connect

Message par lunarok » 06 août 2019, 10:29

Pourquoi une telle IP ? Ton jeedom a quoi comme IP ?
Mon Blog | Xiaomi Home
Pour contribuer au développement des plugins (don ou achat de matériel) : Paypal
Aides nous à t'aider : les logs, détails du soucis, la doc, recherche sur le forum ...
PS : pas de support par MP, je ne répondrais pas

Avatar de l’utilisateur
poluket
Helper
Messages : 1908
Inscription : 19 août 2017, 17:02
Localisation : Chastre - Belgique
Contact :

Re: shelly error fail to connect

Message par poluket » 06 août 2019, 20:43

Comme dit @lunarok, c'est sûrement un problème de routage. IP, réseau et gw de jeedom ainsi que du Shelly aideront à comprendre ton problème
Helper Officiel Jeedom

Installation KNX + Sonos + Xiaomi Yeelight + Jeedom sur VM Proxmox + wifi unifi avec contrôleur + NAS DS1513+ + UPS + PFsense FW

rigauli
Timide
Messages : 59
Inscription : 16 juin 2018, 19:42

Re: shelly error fail to connect

Message par rigauli » 07 août 2019, 13:31

merci à tous.

je problème venait d'un conflit entre mes 2 réseaux (box et google). J'ai réinstallé shelly et c'est maintenant ok.

Par contre,
je l'ai installé sur un moteur came (porte de garage) en contact sec (I/O en mode momentary et timer auto off après 1s). Pas de soucis.
Mais est il possible d'utiliser le SW ? venant de la carte mère du moteur afin de bénéficier des commandes on et off et status ?

merci
JEEDOM Smart
Dongle Z-Wave
RFXCOM (RFX1000); rts, x2d, oregon,

Avatar de l’utilisateur
lunarok
Actif
Messages : 6704
Inscription : 08 août 2014, 12:48
Localisation : Anjou

Re: shelly error fail to connect

Message par lunarok » 07 août 2019, 13:39

Sur le fil principal Shelly on en a parlé et c'est indiqué dans la doc comment récupérer l'input SW du Shelly 1
Mon Blog | Xiaomi Home
Pour contribuer au développement des plugins (don ou achat de matériel) : Paypal
Aides nous à t'aider : les logs, détails du soucis, la doc, recherche sur le forum ...
PS : pas de support par MP, je ne répondrais pas

rigauli
Timide
Messages : 59
Inscription : 16 juin 2018, 19:42

Re: shelly error fail to connect

Message par rigauli » 07 août 2019, 21:42

oui d'accord, mais pour recevoir l'input de CAME ??
JEEDOM Smart
Dongle Z-Wave
RFXCOM (RFX1000); rts, x2d, oregon,

cguittard
Timide
Messages : 7
Inscription : 26 juil. 2018, 16:53

Re: shelly error fail to connect

Message par cguittard » 08 déc. 2019, 12:27

bonjour,

je viens de recevoir mes modules shelly 2.5, et tout fonctionne avec leur app. J'ai acheté le plugin shelly pour ma jeedom SMART sous stretch, mais l'installation des dépendances ne se passe pas bien; quelqu'un peut il m'aider svp.

voila le compte rendu de l'install:

======================================================================
Début de l'installation
--2019-12-08 11:15:03-- https://raw.githubusercontent.com/lunar ... /nodejs.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.120.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.120.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1491 (1.5K) [text/plain]
Saving to: ‘dependencies.sh’
0K . 100% 5.45M=0s
2019-12-08 11:15:03 (5.45 MB/s) - ‘dependencies.sh’ saved [1491/1491]
dependencies.sh: 3: [: shelly: unexpected operator
Version actuelle : 4
Hit:1 http://security.debian.org stretch/updates InRelease
Hit:2 http://repo.jeedom.com/odroid stable InRelease
Ign:3 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ InRelease
Ign:4 http://ftp.debian.org/debian stretch InRelease
Hit:5 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release
Hit:6 http://ftp.debian.org/debian stretch-updates InRelease
Ign:7 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release.gpg
Ign:8 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Hit:9 http://ftp.debian.org/debian stretch-backports InRelease
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Hit:12 http://ftp.debian.org/debian stretch-proposed-updates InRelease
Ign:8 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Hit:13 http://ftp.debian.org/debian stretch Release
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:8 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Get:8 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages [545 B]
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:10 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Get:14 http://repo.jeedom.com/odroid stable/main arm64 Packages [545 B]
Hit:15 http://www.deb-multimedia.org stretch InRelease
Err:17 https://oph.mdrjr.net/meveric all InRelease
Connection timed out after 120000 milliseconds
Err:18 https://oph.mdrjr.net/meveric stretch InRelease
Connection timed out after 120001 milliseconds
Fetched 545 B in 4min 0s (2 B/s)
Reading package lists...
W: The repository 'http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release' is not signed.
W: No Hash entry in Release file /var/lib/apt/lists/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Release
W: Invalid 'Date' entry in Release file /var/lib/apt/lists/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Release
W: Conflicting distribution: http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release (expected dists/stable/main/binary-arm64/ but got )
E: Failed to stat /var/lib/apt/lists/partial/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Packages - pkgAcqTransactionItem::TransactionState-stat (2: No such file or directory)
Reading package lists...
Building dependency tree...
Reading state information...
lsb-release is already the newest version (9.20161125).
0 upgraded, 0 newly installed, 0 to remove and 189 not upgraded.
KO, version obsolète à upgrader
Suppression du Nodejs existant et installation du paquet recommandé
Reading package lists...
Building dependency tree...
Reading state information...
Package 'npm' is not installed, so not removed
The following packages will be REMOVED:
libuv1* nodejs*
0 upgraded, 0 newly installed, 2 to remove and 189 not upgraded.
After this operation, 13.5 MB disk space will be freed.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 50756 files and directories currently installed.)
Removing nodejs (4.8.2~dfsg-1) ...
Removing libuv1:arm64 (1.9.1-3) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for man-db (2.7.6.1-2) ...
dependencies.sh: 37: [: aarch64: unexpected operator
Utilisation du dépot officiel
## Installing the NodeSource Node.js 12.x repo...
## Populating apt-get cache...
+ apt-get update
Hit:1 http://security.debian.org stretch/updates InRelease
Hit:2 http://www.deb-multimedia.org stretch InRelease
Hit:3 http://repo.jeedom.com/odroid stable InRelease
Ign:4 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ InRelease
Ign:5 http://ftp.debian.org/debian stretch InRelease
Hit:6 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release
Hit:7 http://ftp.debian.org/debian stretch-updates InRelease
Ign:8 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release.gpg
Ign:9 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Hit:10 http://ftp.debian.org/debian stretch-backports InRelease
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Hit:13 http://ftp.debian.org/debian stretch-proposed-updates InRelease
Ign:9 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Hit:14 http://ftp.debian.org/debian stretch Release
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:9 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Get:9 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Packages [545 B]
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Ign:11 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en
Ign:12 http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Translation-en_US
Get:15 http://repo.jeedom.com/odroid stable/main arm64 Packages [545 B]
Err:17 https://oph.mdrjr.net/meveric all InRelease
Connection timed out after 120000 milliseconds
Err:18 https://oph.mdrjr.net/meveric stretch InRelease
Connection timed out after 120000 milliseconds
Fetched 545 B in 4min 0s (2 B/s)
Reading package lists...
W: The repository 'http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release' is not signed.
W: No Hash entry in Release file /var/lib/apt/lists/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Release
W: Invalid 'Date' entry in Release file /var/lib/apt/lists/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Release
W: Conflicting distribution: http://repo.jeedom.com/odroid dists/stable/main/binary-arm64/ Release (expected dists/stable/main/binary-arm64/ but got )
E: Failed to stat /var/lib/apt/lists/partial/repo.jeedom.com_odroid_dists_stable_main_binary-arm64_Packages - pkgAcqTransactionItem::TransactionState-stat (2: No such file or directory)
Error executing command, exiting
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
libuv1
The following NEW packages will be installed:
libuv1 nodejs
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
0 upgraded, 2 newly installed, 0 to remove and 189 not upgraded.
Need to get 0 B/3,248 kB of archives.
After this operation, 13.5 MB of additional disk space will be used.
Selecting previously unselected package libuv1:arm64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 50689 files and directories currently installed.)
Preparing to unpack .../libuv1_1.9.1-3_arm64.deb ...
Unpacking libuv1:arm64 (1.9.1-3) ...
Selecting previously unselected package nodejs.
Preparing to unpack .../nodejs_4.8.2~dfsg-1_arm64.deb ...
Unpacking nodejs (4.8.2~dfsg-1) ...
Setting up libuv1:arm64 (1.9.1-3) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up nodejs (4.8.2~dfsg-1) ...
update-alternatives: using /usr/bin/nodejs to provide /usr/bin/js (js) in auto mode
Version actuelle : v4.8.2
dependencies.sh: 59: dependencies.sh: npm: not found
chown: cannot access 'node_modules': No such file or directory
rm: cannot remove '/tmp/shelly_dep': No such file or directory
Fin de l'installation

Avatar de l’utilisateur
Nebz
Modérateur
Messages : 6514
Inscription : 23 avr. 2017, 01:37
Localisation : Belgique

Re: shelly error fail to connect

Message par Nebz » 08 déc. 2019, 18:12

Bonjour, ton problème vient du repo jeedom qui a mal été migré, je te conseille de prendre contact avec le support jeedom core afin qu'ils résolvent cela.

Bien à toi
Dev plugin Homebridge

- Fournissez les logs, la capture de vos commandes et vos types génériques svp
- Constructif et bonne humeur, on est pas là pour se lancer des périfs z-wave à la figure :-)

Un petit don ça fait toujours plaisir :)

cguittard
Timide
Messages : 7
Inscription : 26 juil. 2018, 16:53

Re: shelly error fail to connect

Message par cguittard » 12 déc. 2019, 10:37

ok merci mais ils risquent de m'envoyer bouler car c'est suite a l'install de shelly plugin, non

Cordialement

CG

Avatar de l’utilisateur
lunarok
Actif
Messages : 6704
Inscription : 08 août 2014, 12:48
Localisation : Anjou

Re: shelly error fail to connect

Message par lunarok » 12 déc. 2019, 10:53

Non car c'est du a leur dépôt on te dit.
Si je resume, tu rouvres un fil sans rapport avec ton problème
On te dit quoi faire, mais tu préfères douter et me pourrir d'un mp comme si j'allais y répondre et faire mieux
Merci de respecter les personnes, que ce soit les devs ou les intervenants qui vous repondent
Mon Blog | Xiaomi Home
Pour contribuer au développement des plugins (don ou achat de matériel) : Paypal
Aides nous à t'aider : les logs, détails du soucis, la doc, recherche sur le forum ...
PS : pas de support par MP, je ne répondrais pas

cguittard
Timide
Messages : 7
Inscription : 26 juil. 2018, 16:53

Re: shelly error fail to connect

Message par cguittard » 12 déc. 2019, 12:12

Désolé, j'avais pas vu la 1ere réponse, et comme je n'ai jamais appelé le support jeedom, je m'interrogeais sur la marche a suivre,


Donc ce n'est pas un manque de respect, juste mon incompétence et mon manque d'expérience. encore désolé.

encore merci pour l'aide.

Répondre

Revenir vers « Do-It-Yourself ("Faire-soi-même") »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 2 invités