Bonjour
Je me remets à l'exploitation de jeedom après plusieurs mois de pause en intégrant une passerelle Xiaomi et notamment des capteurs d'humidités.
Je précise que je ne maîtrise pas finement jeedom mais j'évite toujours de modifier à tout va ce que je ne comprends pas.
Mon problème :
Alors que tout fonctionnait bien pour la collecte des mes données sur mes capteurs d'humidité Xiaomi ;
j'ai découvert ce matin que je n'avais plus de nouvelles données.
J'ai relancé le demon et je l'ai mis en automatique avec aussi le forcage du heartbeat à 5 mn pour éviter que cela se reproduise sur le plugin Xioami my home de lunarok.
J'ai fait toutes les maj et relance des dépendances mais quand je relance le démon de rfplayer2 le stauts reste à NOK.
Voici le log de rfplayer2 update qui semble indiquer un pb sur : le pip ???????
You should consider upgrading via the 'pip install --upgrade pip' command.
voici le log :
********************************************************
* Installation des dépendances *
********************************************************
Hit:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Get:2 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB]
Fetched 25.4 kB in 0s (25.6 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Package 'python-enum' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 158 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python-pyudev is already the newest version (0.21.0-1).
python-requests is already the newest version (2.12.4-1).
python-serial is already the newest version (3.2.1-1).
0 upgraded, 0 newly installed, 0 to remove and 158 not upgraded.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: enum-compat in /usr/local/lib/python2.7/dist-packages (0.0.3)
Requirement already satisfied: enum34; python_version < "3.4" in /usr/local/lib/python2.7/dist-packages (from enum-compat) (1.1.6)
You are using pip version 18.1, however version 19.3.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
********************************************************
* Installation terminée *
********************************************************
Merci d'avance pour votre aide.
Plugin RFPlayer2 update et demon nok
Pour échanger sur les plugins classés en catégorie "Automatisation"
Revenir vers « [Catégorie] Automatisation »
Aller
- Informations
- ↳ Annonces officielles
- ↳ Présentation et Vitrine d'installations
- ↳ Discussions Générales
- ↳ Petites annonces
- ↳ Tutoriels
- Logiciel Jeedom [Core]
- ↳ Utilisation
- ↳ Backup/Restauration
- ↳ Interactions
- ↳ Scénarios
- ↳ Interfaces
- ↳ Portail web classique (Desktop)
- ↳ Portail web smartphone & tablettes
- ↳ [Plugin officiel] App mobile
- ↳ [Plugin tiers] Application mobile
- ↳ Market Jeedom
- ↳ Suggestions pour le Core
- Plugins Jeedom
- ↳ [Catégorie] Automatisation
- ↳ [Catégorie] Communication
- ↳ [Plugin Officiel] Assistant vocaux
- ↳ [Plugin Officiel] IFTTT
- ↳ [Plugin Officiel] Jeelink
- ↳ [Plugin Officiel] Mail
- ↳ [Plugin Officiel] Networks
- ↳ [Plugin Officiel] SMS
- ↳ [Plugin Tiers] Homebridge
- ↳ [Catégorie] Confort / Bien-être
- ↳ [Plugin Officiel] Green Momit
- ↳ [Plugin Officiel] Nest
- ↳ [Plugin officiel] Thermostat
- ↳ [Catégorie] Energie
- ↳ [Plugin officiel] Energie
- ↳ [Catégorie] Météo
- ↳ [Plugin Officiel] Météo
- ↳ [Plugin Officiel] Netatmo
- ↳ [Catégorie] Multimédia
- ↳ [Plugin Officiel] Denon AVR
- ↳ [Plugin Officiel] Kodi
- ↳ [Plugin Officiel] Sonos controller
- ↳ [Plugin Officiel] SqueezeBox Control
- ↳ [Catégorie] Nature
- ↳ [Catégorie] Monitoring
- ↳ [Plugin Tiers] Monitoring
- ↳ [Plugin Officiel] Onduleur (NUT)
- ↳ [Catégorie] Objets connectés
- ↳ [Plugin Officiel] Broadlink
- ↳ [Plugin Officiel] Karotz
- ↳ [Plugin Officiel] Philips Hue
- ↳ [Catégorie] Organisation
- ↳ [Plugin officiel] Agenda
- ↳ [Plugin Officiel] Géolococalisation
- ↳ [Plugin Officiel] Mode
- ↳ [Plugin Officiel] Waze in Time
- ↳ [Catégorie] Passerelle Domotique
- ↳ [Plugin Tiers] Imperihome
- ↳ [Plugin Tiers] Zibasedom
- ↳ [Catégorie] Programmation
- ↳ [Plugin Officiel] Click Link
- ↳ [Plugin officiel] Scripts
- ↳ [Plugin officiel] Virtuels
- ↳ [Plugin officiel] Widgets
- ↳ [Catégorie] Protocoles domotiques
- ↳ [Plugin Officiel] BLEA
- ↳ [Plugin Officiel] Edisio
- ↳ [Plugin Officiel] EnOcean
- ↳ [Plugin Officiel] IPX 800 v4
- ↳ [Plugin Tiers] KNX
- ↳ [Plugin Tiers] MQTT
- ↳ [Plugin Tiers] MySensors
- ↳ [Plugin Officiel] RFPlayer
- ↳ [Plugin Officiel] RFXcom
- ↳ [Plugin Officiel] Wifipower
- ↳ [Plugin Tiers] Xiaomi Home
- ↳ [Plugin Officiel] xPL
- ↳ [Plugin Officiel] Z-Wave
- ↳ Plugin Z-Wave
- ↳ Configurations OpenZwave Manquantes
- ↳ [Plugin Tiers] ESPEasy
- ↳ [Catégorie] Santé
- ↳ [Catégorie] Sécurité
- ↳ [Plugin officiel] Alarme
- ↳ [Plugin officiel] Caméra
- ↳ [Plugin Officiel] Netatmo Welcome
- ↳ Développements sur Jeedom
- ↳ Suggestions de Plugins
- Matériel Jeedom - Hardware
- ↳ La box JEEDOM SMART
- ↳ La box JEEDOM MINI+
- ↳ La box JEEDOM PRO
- ↳ Do-It-Yourself ("Faire-soi-même")
- ↳ Docker
- ↳ Machines Virtuelles
- ↳ Raspberry Pi
- ↳ Synology
- International JEEDOM
- ↳ [English] JEEDOM Project
- ↳ News
- ↳ Software & Plugins
- ↳ Box's and devices
- ↳ [Deutsch] JEEDOM Projekt
- ↳ Neuigkeiten
- ↳ Software & Plugins
- ↳ Jeedom Box und Geräte
- ↳ [Español] Proyecto JEEDOM
- ↳ Noticias
- ↳ Software & Plugins
- ↳ Los controladores Jeedom y los dispositivos
- ↳ Translation - Traduction
- Archives
- ↳ Ancien Wiki
- ↳ Installation de Jeedom
- ↳ Core de Jeedom
- ↳ Plugins
- ↳ Widgets
- ↳ Scénarios
- ↳ Résolution de problèmes
- ↳ Utilisation & Astuces
- ↳ Modules RFXcom
- ↳ Noeuds MySensors
- ↳ Application externe tierce & Jeedom
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 2 invités